Trinity Audio Single H Series 15" Subwoofer & 5000.1v2 5,000 Watt Monoblock Amplifier
Trinity Audio Single H Series 15" Subwoofer & 5000.1v2 5,000 Watt Monoblock Amplifier is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Description
Description
The Trinity Audio Single H Series 15" Subwoofer, paired with the 5000.1v2 5,000 Watt Monoblock Amplifier, is a high‑power bass solution built for bass enthusiasts who demand depth, control, and reliability. At 3,500 W RMS, this driver uses a quad‑stacked ferrite motor and FEA‑aided design to deliver taut, high‑volume low end that performs in daily driving and competition demos alike.
- Power handling: 3,500 Watts RMS continuous with bursts up to 19,000 watts, providing headroom for dynamic bass passages and aggressive system loudness.
- Motor design: Quad‑stacked ferrite motor with over 33% more ferrite than M‑series, improving magnetic control and linearity at high input.
- Voice coil: 4" BASV high‑temperature dual voice coil with 40% more winding height than M‑series, enhancing thermal tolerance and power handling.
- Spider pack: 10" quad‑layer progressive spider pack for stable cone control across wide excursions.
- Surround: Triple‑layer foam high‑excision surround for durability and extended bass response.
- Cone and dustcap: Rigid composite paper cone with a carbon fiber dustcap to reduce distortion and improve stiffness.
- Enclosure compatibility: Optimized for both ported and bandpass enclosures, suitable for daily use and high‑power demo builds.
- Thermal and structural design: Finite Element Analysis (FEA)‑driven structure with optimized airflow in the motor and basket for efficient heat dissipation at high power.
- Recone options and warranty: Recone options available with a 1‑year manufacturer warranty, supporting long‑term serviceability and reliability.
- Variants: H15 D1 and H15 D2 versions with differing electrical/mechanical parameters (e.g., FS, Re, Qms, Qes, Qts, Mms, BL, Vas, and X‑max) to suit particular amplifier and enclosure choices.
In a real car audio build, this subwoofer anchors a high‑performance system in a ported or bandpass enclosure, delivering deep, controlled bass with low distortion thanks to the rigid cone, advanced motor, and high‑temperature voice coil. Its design, tested QC, and recone options support both daily listening and competitive demonstrations, while the included 1‑year warranty provides peace of mind alongside the paired 5000W amplifier in this package.
| Driver | H15 D1 | H15 D2 |
| FS | 32.0 Hz | 29.0 Hz |
| Re | 1.8 Ω | 3.6 Ω |
| Qms | 6.57 | 5.91 |
| Qes | 0.55 | 0.45 |
| Qts | 0.5 | 0.42 |
| Mms | 454.8 g | 474.6 g |
| Cms | .05 mm/N | .05 mm/N |
| Sd | 122.72 in2 | 122.72 in2 |
| Vas | 43.3 L | 44.2 L |
| Spl | 87.1 dB | 87.1 dB |
| BL | 17.4 | 27.4 |
| X-max | 32mm | 32mm |
| Outer Diameter | 15.5 in | 15.5 in |
| Cutout Diameter | 13.78 in | 13.78 in |
| Motor Diameter | 9.012 in | 9.012 in |
| Mounting Depth | 10.16 in | 10.16 in |
| Displacement | .37 ft3 | .37 ft3 |
| Coil Dimensions | 3.5" 60mm | 3.5" 60mm |
| Coil Wire | Black CCA | Black CCA |
| Ferrite Grade | Y35 | Y35 |
| Terminal Wire Gauge | 4ga | 4ga |
| RMS Power | 3500 | 3500 |
| Burst Power | 9000 | 9000 |
| MODEL | 5000.1v2 |
| RMS @ 4 Ohms | 1,600 Watts |
| RMS @ 2 Ohms | 3,000 Watts |
| RMS @ 1 Ohm | 5,000 Watts |
| Total Harmonic Distortion | <.02% |
| Signal To Noise Ratio | 94db |
| Frequency Range | 10 Hz - 20,000 Hz |
| Signal Input Range | .4 - 3.6 VAC |
| DC Voltage Input Range | 9-16.5 VDC |
| Measurements In. (L x W x H) | 9.3" x 7.5" x 2.5" |
