{"product_id":"ruthless-audio-2300-1-2-300-watt-monoblock-amplifier","title":"Ruthless Audio 2300.1 2,300 Watt Monoblock Amplifier","description":"\u003cp\u003eThe \u003cstrong\u003eRuthless Audio 2300.1 2,300-Watt Monoblock Amplifier\u003c\/strong\u003e is a competition-grade bass machine built for enthusiasts who demand maximum output, rock-solid low-impedance stability, and the flexibility to push their system to its absolute limits. Rated at a crushing \u003cstrong\u003e2,300 watts RMS at 1 ohm\u003c\/strong\u003e and stable all the way down to \u003cstrong\u003e0.5 ohms\u003c\/strong\u003e, the 2300.1 is engineered for high-demand SPL builds, daily drivers running multiple subwoofers, and any install where output is the only metric that matters. Strap two units together at 1 ohm for a combined system capable of moving serious air — this is the amp you build around when you're done compromising.\u003c\/p\u003e\n\n\u003cp\u003eThe 2300.1 puts down \u003cstrong\u003e2,300W RMS @ 1Ω\u003c\/strong\u003e, \u003cstrong\u003e1,200W RMS @ 2Ω\u003c\/strong\u003e, and \u003cstrong\u003e600W RMS @ 4Ω\u003c\/strong\u003e at 14.4V across a \u003cstrong\u003e10Hz–250Hz frequency response\u003c\/strong\u003e with \u003cstrong\u003e0–180° phase control\u003c\/strong\u003e for precise subwoofer integration. Premium \u003cstrong\u003eTiffany-style locking RCA inputs\u003c\/strong\u003e lock in your signal connection and eliminate intermittent contact, while \u003cstrong\u003e1\/0-gauge power inputs\u003c\/strong\u003e support the amp's serious current demands with minimal resistance. THD of less than 0.01% at 4 ohms confirms the 2300.1 stays clean and accurate even at full output, and input sensitivity spanning \u003cstrong\u003e0.2V–6V\u003c\/strong\u003e ensures compatibility with any head unit or DSP. A \u003cstrong\u003e200-amp fuse\u003c\/strong\u003e protects your electrical system under sustained high-output operation, and the included \u003cstrong\u003ebass knob\u003c\/strong\u003e lets you adjust bass level on the fly from the driver's seat without touching the amp.\u003c\/p\u003e\n\n\u003cp\u003eAt \u003cstrong\u003e17\" long\u003c\/strong\u003e, \u003cstrong\u003e9-1\/16\" wide\u003c\/strong\u003e, and \u003cstrong\u003e2.75\" tall\u003c\/strong\u003e, the 2300.1 is a full-size competition monoblock with the footprint to match its output. Electrical upgrades are strongly recommended depending on your vehicle — at 2,300W RMS, your alternator, battery, and Big 3 wiring need to be up to the task. Wire dual 2-ohm voice coil subs in parallel for a 1-ohm final load, or run multiple subs wired to a 0.5-ohm load for maximum output. Small footprint. Ruthless performance.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the Ruthless Audio 2300.1 Monoblock?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,300W RMS @ 1 Ohm\u003c\/strong\u003e — Competition-grade monoblock output engineered for high-demand SPL builds, multi-subwoofer systems, and any install where maximum bass authority is the goal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.5-Ohm Stable\u003c\/strong\u003e — Rated and stable at half-ohm loads, giving you the flexibility to wire multiple subwoofers for maximum output without stressing the amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrappable Design\u003c\/strong\u003e — Strap two 2300.1 units together at 1 ohm for a combined system output that can move serious air in competition or high-output daily builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Knob\u003c\/strong\u003e — Remote bass level control lets you adjust output on the fly from the driver's seat without reaching for the amp or head unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTiffany-Style Locking RCA Inputs\u003c\/strong\u003e — Premium locking connectors eliminate signal loss and intermittent contact for a clean, reliable signal path at any power level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/0-Gauge Power Inputs\u003c\/strong\u003e — Full-size 1\/0 AWG terminals minimize resistance and support the 2300.1's serious current demands for clean, stable power delivery at full output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10Hz–250Hz Frequency Response with Phase Control\u003c\/strong\u003e — Deep infrasonic extension with 0–180° phase adjustment for precise subwoofer integration and maximum bass impact at the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD \u0026lt; 0.01% @ 4Ω\u003c\/strong\u003e — Exceptionally low distortion confirms clean, accurate power delivery even at the 2300.1's elevated output levels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSubwoofer \u0026amp; Electrical Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Ruthless Audio 2300.1 is built for high-excursion subwoofers rated for 1,000W RMS or more. For maximum output at 1 ohm, wire dual 2-ohm voice coil subs in parallel, or dual 4-ohm subs in series-parallel for a 2-ohm load. For 0.5-ohm operation, wire multiple subs to achieve the target impedance and verify your subwoofers are rated for the increased output at that load.\u003c\/p\u003e\n\u003cp\u003eAt 2,300W RMS, electrical upgrades are not optional — they are required for reliable performance. A Big 3 upgrade in 1\/0 AWG is strongly recommended as a minimum, along with a high-output alternator and a secondary battery if running the amp at or near full output for extended periods. A 1\/0-gauge power and ground wiring kit with a 200-amp inline fuse is required. Keep power and ground runs as short as possible to minimize resistance and voltage drop under load. Use the 0–180° phase control to align your subwoofer with your front stage, and set your subsonic filter to protect your subwoofer from over-excursion in ported enclosures.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS Power @ 1Ω (14.4V)\u003c\/td\u003e\n\u003ctd\u003e2,300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS Power @ 2Ω (14.4V)\u003c\/td\u003e\n\u003ctd\u003e1,200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS Power @ 4Ω (14.4V)\u003c\/td\u003e\n\u003ctd\u003e600W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Impedance\u003c\/td\u003e\n\u003ctd\u003e0.5Ω Stable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrappable\u003c\/td\u003e\n\u003ctd\u003eYes (at 1Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Class\u003c\/td\u003e\n\u003ctd\u003eClass-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003e1 (Monoblock)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e10Hz – 250Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhase Control\u003c\/td\u003e\n\u003ctd\u003e0° – 180°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.01% @ 4Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Sensitivity\u003c\/td\u003e\n\u003ctd\u003e0.2V – 6V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCA Inputs\u003c\/td\u003e\n\u003ctd\u003eTiffany-Style Locking RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Input Gauge\u003c\/td\u003e\n\u003ctd\u003e1\/0 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse Rating\u003c\/td\u003e\n\u003ctd\u003e200A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBass Knob\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e17\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e9-1\/16\" (9.0625\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e2.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Standard (incl. 0.5Ω) \/ 2 Year Extended Available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the Ruthless Audio 2300.1 really 0.5-ohm stable?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the 2300.1 is rated and warranted at 0.5 ohms. This allows you to wire multiple subwoofers to a half-ohm final load for maximum output. Ensure your electrical system is properly upgraded before running the amp at 0.5 ohms for extended periods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I strap two 2300.1 amplifiers together?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the 2300.1 is strappable at 1 ohm. Two strapped units deliver a combined system output capable of powering the most demanding competition and high-output daily builds. Ensure both amps are on the same gain setting and use a proper strap cable between units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What electrical upgrades do I need for the 2300.1?\u003c\/strong\u003e\u003cbr\u003eA: At 2,300W RMS, a Big 3 upgrade in 1\/0 AWG is the minimum recommendation. For builds running the amp at or near full output, a high-output alternator (200A+) and a secondary AGM or lithium battery are strongly recommended to maintain voltage above 13.5V under sustained load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What subwoofers pair best with the Ruthless Audio 2300.1?\u003c\/strong\u003e\u003cbr\u003eA: High-excursion subwoofers rated for 1,000W RMS or more are ideal. Look for drivers with dual 2-ohm or dual 4-ohm voice coils so you can wire to a 1-ohm or 2-ohm final load. For 0.5-ohm operation, wire multiple subs in parallel to achieve the target impedance.\u003c\/p\u003e","brand":"Ruthless Audio","offers":[{"title":"No","offer_id":43708435431491,"sku":null,"price":514.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":43708435464259,"sku":null,"price":564.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/ethwrhtwrthgaset.png?v=1787598595","url":"https:\/\/www.trinitycaraudio.com\/products\/ruthless-audio-2300-1-2-300-watt-monoblock-amplifier","provider":"Trinity Car Audio","version":"1.0","type":"link"}