Massive Audio BP1000.1v2 1,000 Watt Monoblock Amplifier

The Massive Audio BP1000.1v2 is a 1,000-watt monoblock amplifier designed for serious subwoofer performance in premium car audio builds. Built as part of the BLADE BP Series, it emphasizes low-impedance stability, integrated signal handling, and rugged protection for demanding bass applications.

• Peak Output Power @ 14.4V: 1000W x 1 — Provides strong transient headroom for dynamic bass bursts when the vehicle’s electrical system is capable of delivering full rail voltage.
• 2 Ohm RMS: 455W x 1 — Stable into a 2-ohm mono load, delivering substantial continuous power to a single sub for tight, loud low-end punch.
• 4 Ohm RMS: 250W x 1 — Adequate continuous power for higher-impedance sub setups, maintaining clean output with reduced heat at 4 ohms.
• Minimum Load: 2 Ohm Mono — Specifies the lowest impedance the channel can reliably drive in mono configuration, guiding sub selection for best results.
• Input Level: 0.2–9.0V — Accepts high-level signals from factory radios or RCA sources, with a built-in line converter to simplify integration.
• Freq. Response: 15Hz–35kHz — Wide bandwidth ensuring accurate signal handling across sub bass and full-range paths sourced to the amp.
• THD at 4 Ohm Load: <0.1% — Indicates extremely low distortion at typical operating power, contributing to clearer bass.
• S/N Ratio: >90dB — Low noise floor for cleaner signal reproduction in noisy automotive environments.
• Bass Boost: 0–6dB / 12dB @ 45Hz — Flexible bass shaping to tailor sub response without needing external processors.
• Gain Remote: UR1 (Optional) — Optional knob for convenient level control from the listening seat, without revising wiring.
• Built‑in OEM Line Converter — Simplifies factory-radio integration by converting high-level signals to a clean line-level input.
• Low Pass Crossover: 50Hz–750Hz (Variable) / OFF — Lets you tailor the amp’s frequency band to the sub or multi-woofer setup, or bypass for full-range use.
• Auto Sensing Turn On — Detects DC offset from the head unit and switches on the amp automatically, reducing loom wiring steps during install.
• 12V Remote Output — Lets you power external devices triggered by the amp’s hi-level inputs, freeing up additional wiring options.
• 5‑Way Protection — Comprehensive protection to guard against short circuits, thermal overload, and other common car-audio faults.
• Mil Spec PCB with SMD — Rugged construction with modern manufacturing practices for reliability in the automotive environment.
• Compliance: RoHS, E‑Mark, CTA‑2006, CE — Ensures industry-standard conformity across key regions.
• Dimensions: 2"H x 7.1"W x 12.9"L — Compact footprint designed for flexible mounting in a variety of dash, trunk, or under-seat spaces.

Benefits: The BP1000.1v2 is built for a dedicated sub channel in a high-performance system, delivering substantial 2-ohm capable power with tight control and low noise. Its built-in line converter and DC-offset auto turn-on simplify integration with modern factory radios, while the optional UR1 gain remote adds convenient level adjustment from the driver’s seat. With robust protection, a wide crossover range, and compact dimensions, it suits a high-output, one-channel sub amplifier path in serious audio builds.