{"product_id":"jbl-stage3-968m-6x9-three-way-car-speakers","title":"JBL Stage3 968M 6x9\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage3 968M 6x9\" 3-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 80W RMS \/ 640W peak power at a True 4-ohm nominal impedance. Three-way design, glass-fiber Plus One™ cone, PEI dome tweeter, grilles and hardware included — this is the step-up from the 968MF for listeners who want the complete package right out of the box.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e with a \u003cstrong\u003e10% glass-fiber reinforced cone\u003c\/strong\u003e — the added rigidity reduces unwanted flex for tighter, more accurate bass reproduction with deeper extension down to 40Hz. The Plus One™ design increases effective cone area beyond a standard 6x9\" driver for more bass output and musical body. Sensitivity reaches 92dB at 2.83V, and the \u003cstrong\u003eTrue 4-ohm impedance\u003c\/strong\u003e is optimized to extract maximum clean power from both factory head units and aftermarket amplifiers. The 3-way design adds a dedicated \u003cstrong\u003ePEI balanced dome midrange and tweeter array\u003c\/strong\u003e, delivering smoother vocal reproduction and more refined high-frequency detail than a standard 2-way coaxial can achieve. Frequency response spans 40Hz to 20kHz for full musical coverage. Built with \u003cstrong\u003epost-consumer recycled plastics and PVC-free wiring\u003c\/strong\u003e. Each set includes \u003cstrong\u003ematching grilles, mounting screws, spade clips, and foam gaskets\u003c\/strong\u003e for a clean, complete install.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a straightforward drop-in for most vehicles with standard 6x9\" rear deck or door locations. Pair with a 4-channel amplifier rated 50–100W RMS per channel for the best results, or run directly off a quality head unit — the True 4-ohm design and 92dB sensitivity make these a strong performer in head-unit-only setups. Ideal for R\u0026amp;B, hip-hop, rock, and pop where bass punch, vocal clarity, and overall fullness matter most.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage3 968M?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Dedicated midrange and tweeter elements deliver smoother vocal reproduction and more refined highs than a standard 2-way coaxial.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Plus One™ Cone:\u003c\/strong\u003e 10% glass-fiber reinforcement adds rigidity for tighter bass and more accurate midrange — deeper extension down to 40Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Impedance:\u003c\/strong\u003e Optimized for maximum clean power transfer from factory head units and aftermarket amplifiers — no impedance mismatch, no wasted watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Smooth, detailed high-frequency reproduction without harshness — even at high listening volumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92dB Sensitivity:\u003c\/strong\u003e High-efficiency design delivers strong output per watt — ideal for head-unit-only installs or low-powered amp setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS \/ 640W Peak Power Handling:\u003c\/strong\u003e Serious headroom for real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrilles, Screws, Spade Clips \u0026amp; Foam Gaskets Included:\u003c\/strong\u003e Everything needed for a clean, complete install — no sourcing hardware separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-Friendly Construction:\u003c\/strong\u003e Post-consumer recycled plastics and PVC-free wiring — premium performance with a lighter environmental footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Stage3 968M's True 4-ohm impedance and 92dB sensitivity make it a strong performer off a factory head unit — you'll hear a significant improvement over OEM speakers immediately. For the best performance, pair with a 4-channel amp rated 50–100W RMS per channel at 4 ohms. Mount in the factory 6x9\" rear deck or door location using the included hardware and foam gaskets for a clean, rattle-free install. Use 16-gauge or heavier speaker wire for runs over 6 feet.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE3 968M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e3-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e6x9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e640W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e92dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e40Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (True 4-Ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass-Fiber Reinforced (10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003ePEI Balanced Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eGrilles, Mounting Screws, Spade Clips, Foam Gaskets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePost-Consumer Recycled Plastics, PVC-Free Wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e3.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Stage3 968M and the Stage3 968MF?\u003c\/strong\u003e\u003cbr\u003eA: Both are 6x9\" 3-way coaxials sharing the same Plus One™ glass-fiber cone, True 4-ohm design, power handling, and sensitivity specs. The key difference is that the 968M includes matching grilles, mounting screws, spade clips, and foam gaskets in the box — the 968MF does not include grilles. Choose the 968M for a complete out-of-the-box install; choose the 968MF if you're using factory grilles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stage3 968M off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the True 4-ohm impedance and 92dB sensitivity are designed to work well with factory head units. You'll hear a significant improvement over OEM speakers immediately. An external amplifier will unlock the full 80W RMS potential for even better dynamics and clarity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Stage3 968M?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 50–100W RMS per channel at 4 ohms is ideal. The True 4-ohm design ensures clean, efficient power transfer without impedance mismatch issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Stage3 968M fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: The 968M is designed for standard 6x9\" locations (rear deck or doors). Contact us at Trinity Car Audio with your vehicle's year, make, and model to confirm fitment before ordering.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698237833283,"sku":"JBLSPKS3968M","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_3_CAR_AUDIO_968M_HERO_0125_x1_c13fd394-2b34-4f7e-a354-50c7f16ab747.png?v=1787255889","url":"https:\/\/www.trinitycaraudio.com\/products\/jbl-stage3-968m-6x9-three-way-car-speakers","provider":"Trinity Car Audio","version":"1.0","type":"link"}