JBL Stadium 22S 2" Midrange Car Audio Speakers

The JBL Stadium 22S 2" Midrange Car Audio Speakers deliver 50W RMS / 150W peak power at a 3.0-ohm nominal impedance, purpose-built to convert any 2-way component system into a full 3-way configuration. If your current setup is missing vocal presence, instrument body, and the midrange detail that sits between your woofer and tweeter, the Stadium 22S fills that gap with Stadium Series precision.

Operating across a 500Hz to 7kHz frequency range, the Stadium 22S covers the most critical band in music — the range where vocals, guitars, keyboards, and most acoustic instruments live. At 94dB sensitivity, these 2" drivers are exceptionally efficient, delivering strong, clear midrange output without taxing your amplifier. The 3.0-ohm impedance matches seamlessly with JBL Stadium Series component systems for consistent impedance loading across the full 3-way setup. The compact 2" form factor fits in a wide range of OEM dash, door, and A-pillar locations, and the package includes custom mounting adapters, crossovers, and grilles for a clean, tailored installation. Whether you're upgrading a Stadium 62CF or 962CF system, or building a custom 3-way install from scratch, the Stadium 22S is the midrange driver that completes the picture.

Integrate the Stadium 22S into your existing 2-way component system by connecting it through the included crossover network, which handles the 500Hz–7kHz bandpass filtering automatically. For maximum control, use an active crossover or DSP processor with dedicated midrange channel output. Mount in the dash, door panel, or A-pillar using the included adapters and grilles. Pair with a Stadium Series component system and a multi-channel amplifier for a reference-level 3-way in-car audio experience.

Why Choose the JBL Stadium 22S?

• 500Hz – 7kHz Midrange Coverage: Fills the most critical frequency band in music — vocals, guitars, keyboards, and acoustic instruments reproduced with Stadium Series clarity.
• 94dB Sensitivity: Exceptionally efficient — strong, detailed midrange output without taxing your amplifier.
• 3-Way System Upgrade: Converts any JBL 2-way component system into a full 3-way configuration for dramatically improved vocal presence and midrange detail.
• 50W RMS / 150W Peak Power Handling: Handles real-world amplifier power without distortion or thermal compression.
• 3.0-Ohm Impedance: Matches seamlessly with JBL Stadium Series component systems for consistent impedance loading.
• Compact 2" Form Factor: Fits a wide range of OEM dash, door, and A-pillar locations with minimal modification.
• Custom Mounting Adapters, Crossovers & Grilles Included: Everything needed for a clean, professional 3-way install right out of the box.
• Stadium Series Engineering: Built to the same standards as the Stadium 62CF and 962CF — consistent sonic character across the full 3-way system.

Installation Recommendations

Connect the Stadium 22S through the included crossover network for a passive 3-way setup — it handles the 500Hz–7kHz bandpass filtering automatically. For maximum control and precision, use an active crossover or DSP processor with a dedicated midrange channel output, allowing you to set exact crossover points and apply time alignment. Mount in the dash, door panel, or A-pillar using the included adapters and grilles. Aim the driver toward the listening position for the best midrange imaging. Use 18-gauge or heavier wire for midrange runs. Pairs best with a Stadium Series component system (62CF or 962CF) and a multi-channel amplifier with at least 6 channels.

Full Specifications

Frequently Asked Questions

Q: Which JBL component systems does the Stadium 22S pair with?
A: The Stadium 22S is designed to pair with JBL Stadium Series component systems, particularly the Stadium 62CF and Stadium 962CF. The matching 3.0-ohm impedance and Stadium Series crossover design ensure consistent sonic character across the full 3-way system.

Q: Do I need a separate crossover for the Stadium 22S?
A: No — a crossover network is included in the box for passive 3-way integration. For more precise active crossover control and time alignment, a DSP processor with a dedicated midrange channel output will take the system to reference level.

Q: Where should I mount the Stadium 22S?
A: The dash, door panel, or A-pillar are the most common locations. Aim the driver toward the listening position for the best midrange imaging. The included mounting adapters and grilles accommodate a range of OEM locations with minimal modification.

Q: How many amplifier channels do I need for a full 3-way system?
A: A minimum of 6 channels — 2 for the woofers, 2 for the midranges, and 2 for the tweeters. A 6-channel amp or a combination of a 4-channel and a 2-channel amp will work. A DSP processor between the head unit and amplifier is strongly recommended for time alignment and active crossover control.