JBL Club 194T 1" Component Car Audio Tweeters

The JBL Club 194T 1" Component Car Audio Tweeters deliver 50W RMS / 150W peak power at a 3.0-ohm nominal impedance, engineered to add crisp, detailed high-frequency reproduction to any component system or as a standalone upgrade to a factory setup. With 92dB sensitivity, Starfish™ mounting adapters, and I-Mount™ hardware that angles up to ±40 degrees, the Club 194T gives you professional-grade tweeter placement flexibility in a compact, easy-to-install package.

The Club 194T covers the high-frequency spectrum from 3kHz to 20kHz — the critical range for vocal clarity, instrument detail, and stereo imaging. At 92dB sensitivity, these tweeters are exceptionally efficient, delivering strong output from both factory head units and aftermarket amplifiers without straining your source. The compact 4.4cm cutout diameter and 2.5cm mounting depth make them compatible with a wide range of OEM locations including A-pillars, sail panels, dash corners, and door panels. The included Starfish™ mounting adapter uses break-off tabs to fit neatly behind factory grilles without modification, while the I-Mount™ kit provides surface or flush mounting options with up to ±40 degrees of angle adjustment — so you can aim the tweeter's dispersion axis precisely toward the listening position for the best soundstage imaging. The 3.0-ohm impedance pairs seamlessly with JBL Club Series woofers and component systems.

The Club 194T is the ideal tweeter upgrade for anyone running a JBL Club Series component system, or for listeners who want to add a dedicated tweeter to an existing coaxial or factory setup. Pair with a 4-channel amplifier or run off a head unit — the 92dB sensitivity handles both with ease. Mount in the A-pillar or sail panel and use the ±40-degree angle adjustment to aim directly at the driver or passenger seat for a focused, wide soundstage.

Why Choose the JBL Club 194T?

• 92dB Sensitivity: Exceptionally efficient — delivers strong, detailed high-frequency output from both factory head units and aftermarket amplifiers.
• Starfish™ Mounting Adapter: Break-off tabs allow clean fitment behind factory grilles and OEM locations without cutting or modification.
• I-Mount™ Kit (±40° Adjustment): Surface or flush mount with up to ±40 degrees of angle adjustment — aim the tweeter precisely toward the listening position for optimal imaging.
• 3kHz – 20kHz Frequency Response: Covers the full high-frequency spectrum for vocal clarity, instrument detail, and precise stereo imaging.
• 50W RMS / 150W Peak Power Handling: Handles real-world amplifier power without distortion or thermal compression.
• Compact 4.4cm Cutout / 2.5cm Depth: Fits a wide range of OEM locations — A-pillars, sail panels, dash corners, and door panels.
• 3.0-Ohm Impedance: Matches seamlessly with JBL Club Series woofers and component systems for consistent impedance loading.
• Easy Serviceability: Designed for straightforward installation and removal — spend less time on the install, more time on the music.

Installation Recommendations

For the best soundstage imaging, mount the Club 194T in the A-pillar or sail panel using the I-Mount™ hardware, and use the ±40-degree angle adjustment to aim the tweeter directly toward the driver or passenger seat. If mounting behind a factory grille, use the Starfish™ adapter with the appropriate break-off tabs for your location. Pair with a high-pass filter or crossover set at 3–4kHz to protect the tweeter from low-frequency content. If running as part of a component system, use the included passive crossover from your woofer kit. Use 18-gauge or heavier wire for tweeter runs.

Full Specifications

Frequently Asked Questions

Q: Do the Club 194T tweeters work with the JBL Club 64C or Club 64CSQ component systems?
A: Yes — the Club 194T shares the same 3.0-ohm impedance as the Club Series woofers and is designed to integrate seamlessly with JBL Club Series component systems. They also work as a standalone add-on to any existing coaxial or factory setup.

Q: What crossover point should I use with the Club 194T?
A: Set your high-pass crossover at 3–4kHz to protect the tweeter from low-frequency content. If running with a JBL Club Series component system, the included passive crossover handles this automatically.

Q: Can I mount the Club 194T without cutting into my vehicle?
A: In most cases, yes. The Starfish™ adapter with break-off tabs is designed to fit behind factory grilles and OEM locations without cutting. The I-Mount™ kit provides surface and flush mounting options for locations where a factory grille isn't available.

Q: What's the maximum angle adjustment on the I-Mount™ kit?
A: The I-Mount™ kit allows up to ±40 degrees of angle adjustment, giving you significant flexibility to aim the tweeter's dispersion axis directly toward the driver or passenger seat for optimal soundstage imaging.