Heise H16 Pro Series LED Kit - Single Beam

The Heise H16 Pro Series LED Kit (HE-H16PRO) unleashes a blinding 16,000 lumens of crisp white light — 260% brighter than stock halogen H16 bulbs — in a direct plug-and-play single-beam format. Commonly used in fog light and daytime running light applications, the H16 Pro Series is built for off-road enthusiasts and truck owners who demand maximum visibility from every light position on their rig. An extreme LED chipset, all-metal housing, and 2 mm solid copper thermodynamic core keep operating temps locked at just 46.1°C, while slim side-cable routing makes installation clean and straightforward in tight fog light housings.

Running at 70W per set, the H16 Pro's IC thermal controller pairs with a high-speed smart fan to actively pull heat away from the diodes — extending LED life and maintaining consistent output even under sustained use. The fully rotatable collar lets you fine-tune the beam pattern for perfect alignment in both projector and reflector housings, while built-in reverse polarity protection means you can't wire it wrong. The integrated EMI filter keeps your radio, GPS, and CB completely static-free. Backed by a 3-year warranty, this is the H16 LED upgrade that serious off-road enthusiasts have been waiting for.

The H16 Pro Series fits any vehicle running an H16 single-beam socket — a fitment commonly found in fog light and DRL positions on a range of domestic and import trucks, SUVs, and crossovers. Installation is plug-and-play with no relay harness required in most applications. For vehicles with CANBUS systems or LED warning lights, a CANBUS decoder is recommended. Pair with a quality relay harness on high-draw or older wiring applications for maximum output and longevity.

Why Choose the Heise H16 Pro Series LED Kit?

• 16,000-Lumen Output: 260% brighter than stock halogen H16 bulbs for dramatically improved fog light and DRL visibility.
• 70W Per Set: High-output power draw engineered for maximum lumen delivery without overloading factory wiring.
• 2 mm Solid Copper Thermodynamic Core: Efficiently pulls heat away from the LED chipset, extending bulb life and maintaining consistent output under sustained use.
• IC Thermal Controller + Smart Fan: Active cooling system keeps operating temps at just 46.1°C even during extended high-output use.
• Rotatable Collar: Dial in your exact beam pattern for proper cutoff alignment in projector or reflector fog light housings.
• Slim Side-Cable Connection: Clean, compact connector fits tight fog light housings without modification.
• Built-In EMI Filter: Eliminates radio static and interference — critical for rigs running CB, ham radio, or GPS systems.
• 3-Year Warranty: Heise stands behind the H16 Pro Series with one of the strongest warranties in the LED lighting segment.

Installation & Compatibility Recommendations

The Heise H16 Pro Series installs directly into any H16 socket with no modifications required in most vehicles. The single-beam design is a true drop-in replacement for H16 fog light and DRL applications. For vehicles with CANBUS error detection (common on European platforms and some newer trucks and crossovers), add a CANBUS decoder to prevent flickering or error codes. On high-draw applications or older wiring, a relay harness is recommended to ensure the full 70W draw is sourced directly from the battery. The rotatable collar should be adjusted after installation to confirm proper beam pattern before driving.

Full Specifications

Frequently Asked Questions

What amp rating do I need for the Heise H16 Pro?
The H16 Pro draws 70W per set (35W per bulb), roughly 5.8A per bulb at 12V. Factory H16 fog light wiring can typically handle this, but a relay harness is recommended for older vehicles or sustained high-use applications to protect factory connectors and maximize output.

Can I use the H16 Pro for daily driving?
The H16 Pro is labeled for off-road use only, as aftermarket LED kits are not DOT-certified for on-road use in the US. Many enthusiasts use them for off-road, overlanding, and trail driving where DOT compliance is not required.

Will the H16 Pro work in my projector fog light housing?
Yes — the rotatable collar allows you to adjust the LED chip orientation for proper beam alignment in both projector and reflector fog light housings.

Do I need a CANBUS decoder?
On most older trucks and SUVs, no decoder is needed. If your vehicle has a CANBUS system that monitors bulb resistance (common on newer crossovers and European vehicles), you may see a warning light or flickering — a CANBUS decoder resolves this instantly.