Heise H13 Pro Series LED Kit - Dual Beam

The Heise H13 Pro Series LED Kit (HE-H13PRO) lights up the trail with a blazing 16,000 lumens of crisp white light — 260% brighter than stock halogen H13 bulbs — in a direct plug-and-play dual-beam format. Built for trucks, SUVs, and off-road rigs running the H13 (9008) socket, this kit handles both high and low beam functions from a single bulb with zero compromises. An extreme LED chipset, all-metal housing, and 2 mm solid copper thermodynamic core keep operating temps locked at just 46.1°C, while a slim side-cable connection keeps the install clean in tight engine bays. Instantaneous full-lumen startup, integrated EMI shielding, and built-in reverse polarity protection round out a kit built for enthusiasts who demand the best.

Running at 70W per set, the H13 Pro's IC thermal controller pairs with a high-speed smart fan to actively pull heat away from the diodes — extending LED life and maintaining consistent output even on the longest trail runs. The fully rotatable collar lets you fine-tune the beam pattern for perfect cutoff alignment in both projector and reflector housings, while the built-in EMI filter eliminates radio static and interference critical for rigs running CB, ham radio, or GPS systems. Backed by a 3-year warranty, this is the H13 LED upgrade that serious off-road enthusiasts have been waiting for.

The H13 Pro Series fits any vehicle running an H13 / 9008 dual-beam socket — a common fitment across a wide range of Ford trucks and SUVs including the F-150, F-250, F-350, Expedition, and Explorer from the mid-2000s through early 2010s. Installation is plug-and-play with no relay harness required in most applications. For vehicles with CANBUS systems or LED warning lights, a CANBUS decoder is recommended. Pair with a quality relay harness on high-draw or older wiring applications for maximum output and longevity.

Why Choose the Heise H13 Pro Series LED Kit?

• 16,000-Lumen Output: 260% brighter than stock halogen H13 bulbs for dramatically improved night visibility on and off the trail.
• Dual Beam (Hi/Lo): Handles both high and low beam functions from a single H13 / 9008 bulb — true drop-in replacement.
• 70W Per Set: High-output power draw engineered for maximum lumen delivery without overloading factory wiring.
• 2 mm Solid Copper Thermodynamic Core: Efficiently pulls heat away from the LED chipset, extending bulb life and maintaining consistent output under sustained use.
• IC Thermal Controller + Smart Fan: Active cooling system keeps operating temps at just 46.1°C even during extended high-output use.
• Rotatable Collar: Dial in your exact beam pattern for proper cutoff alignment in projector or reflector housings.
• Built-In EMI Filter: Eliminates radio static and interference — critical for off-road rigs running CB, ham radio, or GPS systems.
• 3-Year Warranty: Heise stands behind the H13 Pro Series with one of the strongest warranties in the LED headlight segment.

Installation & Compatibility Recommendations

The Heise H13 Pro Series installs directly into any H13 / 9008 socket with no modifications required in most vehicles. The dual-beam design handles both high and low beam functions from a single bulb, making it a true drop-in replacement. The slim side-cable connection keeps the install tidy in tight engine bays common on Ford trucks and SUVs. For vehicles with CANBUS error detection, add a CANBUS decoder to prevent flickering or error codes. On high-draw applications or older wiring, a relay harness is recommended to ensure the full 70W draw is sourced directly from the battery. The rotatable collar should be adjusted after installation with the headlights aimed at a wall to confirm proper beam cutoff before driving.

Full Specifications

Frequently Asked Questions

What amp rating do I need for the Heise H13 Pro?
The H13 Pro draws 70W per set (35W per bulb), roughly 5.8A per bulb at 12V. Factory H13 wiring can typically handle this, but a relay harness is recommended for older vehicles or sustained high-use applications to protect factory connectors and maximize output.

Can I use the H13 Pro for daily driving?
The H13 Pro is labeled for off-road use only, as aftermarket LED kits are not DOT-certified for on-road use in the US. Many enthusiasts use them for off-road, overlanding, and trail driving where DOT compliance is not required.

Will the H13 Pro work in my Ford F-150 or F-250?
The H13 / 9008 socket is a common fitment on Ford trucks and SUVs from the mid-2000s through early 2010s. The H13 Pro is a direct plug-and-play fit in most of these applications. A CANBUS decoder may be needed on newer model years.

Do I need a CANBUS decoder?
On most older Ford trucks with H13 sockets, no decoder is needed. If your vehicle has a CANBUS system that monitors bulb resistance, you may see a warning light or flickering — a CANBUS decoder resolves this instantly.