Heise H11 Pro Series LED Kit - Single Beam

The Heise H11 Pro Series LED Kit (HE-H11PRO) lights up the trail ahead with a blazing 16,000 lumens of crisp white light — 260% brighter than standard LEDs — in a direct plug-and-play single-beam format. One of the most popular LED fitments on the market, the H11 socket is used for low beam, fog light, and DRL applications across a massive range of domestic and import cars, trucks, and SUVs. The H11 Pro Series is built for off-road enthusiasts who demand maximum visibility from every light position on their rig, combining an extreme LED chipset with an all-metal housing and a 2 mm solid copper thermodynamic core that keeps operating temps locked at just 46.1°C. Instantaneous full-lumen startup, integrated EMI shielding, and a slim side-cable connection make this the definitive H11 LED upgrade.

Running at 70W per set, the H11 Pro's IC thermal controller pairs with a high-speed smart fan to actively pull heat away from the diodes — extending LED life and maintaining consistent output even under sustained use. The fully rotatable collar lets you fine-tune the beam pattern for perfect cutoff alignment in both projector and reflector housings, while built-in reverse polarity protection means you can't wire it wrong. The integrated EMI filter keeps your radio, GPS, and CB completely static-free. Backed by a 3-year warranty, this is the H11 LED upgrade that serious off-road enthusiasts have been waiting for.

The H11 Pro Series fits any vehicle running an H11 single-beam socket — one of the most common fitments across virtually every major automotive brand for low beam, fog light, and DRL applications. Installation is plug-and-play with no relay harness required in most applications. For vehicles with CANBUS systems or LED warning lights, a CANBUS decoder is recommended. Pair with a quality relay harness on high-draw or older wiring applications for maximum output and longevity.

Why Choose the Heise H11 Pro Series LED Kit?

• 16,000-Lumen Output: 260% brighter than standard LEDs for dramatically improved low beam, fog light, and DRL visibility on and off the trail.
• 70W Per Set: High-output power draw engineered for maximum lumen delivery without overloading factory wiring.
• 2 mm Solid Copper Thermodynamic Core: Efficiently pulls heat away from the LED chipset, extending bulb life and maintaining consistent output under sustained use.
• IC Thermal Controller + Smart Fan: Active cooling system keeps operating temps at just 46.1°C even during extended high-output use.
• Rotatable Collar: Dial in your exact beam pattern for proper cutoff alignment in projector or reflector housings.
• Slim Side-Cable Connection: Clean, compact connector fits tight headlight and fog light housings without modification.
• Built-In EMI Filter: Eliminates radio static and interference — critical for rigs running CB, ham radio, or GPS systems.
• 3-Year Warranty: Heise stands behind the H11 Pro Series with one of the strongest warranties in the LED lighting segment.

Installation & Compatibility Recommendations

The Heise H11 Pro Series installs directly into any H11 socket with no modifications required in most vehicles. The single-beam design is a true drop-in replacement for H11 low beam, fog light, and DRL applications. For vehicles with CANBUS error detection (common on European platforms and many newer domestic vehicles), add a CANBUS decoder to prevent flickering or error codes. On high-draw applications or older wiring, a relay harness is recommended to ensure the full 70W draw is sourced directly from the battery. The rotatable collar should be adjusted after installation with the headlights aimed at a wall to confirm proper beam cutoff before driving.

Full Specifications

Frequently Asked Questions

What amp rating do I need for the Heise H11 Pro?
The H11 Pro draws 70W per set (35W per bulb), roughly 5.8A per bulb at 12V. Factory H11 wiring can typically handle this, but a relay harness is recommended for older vehicles or sustained high-use applications to protect factory connectors and maximize output.

Can I use the H11 Pro for daily driving?
The H11 Pro is labeled for off-road use only, as aftermarket LED kits are not DOT-certified for on-road use in the US. Many enthusiasts use them for off-road, overlanding, and trail driving where DOT compliance is not required.

Will the H11 Pro work in my projector headlight housing?
Yes — the rotatable collar allows you to adjust the LED chip orientation for proper beam cutoff alignment in both projector and reflector housings. Projector housings typically produce the cleanest beam pattern with LED bulbs.

Do I need a CANBUS decoder?
On many newer vehicles with H11 sockets, a CANBUS decoder may be needed to prevent flickering or error codes. On older trucks, Jeeps, and off-road platforms, no decoder is typically needed.