Heise 9005 Pro Series LED Kit - Single Beam

The Heise 9005 Pro Series LED Kit (HE-9005PRO) lights up the darkest trails with a blinding 16,000 lumens of crisp white light — 260% brighter than stock halogen 9005 / HB3 bulbs — in a direct plug-and-play single-beam format. Built for trucks, SUVs, and off-road rigs running the 9005 socket for high beam or fog light applications, the 9005 Pro Series combines an extreme LED chipset with an all-metal housing and a 2 mm solid copper thermodynamic core that keeps operating temps locked at just 46.1°C. Slim side-cable connections, instantaneous full-lumen startup, and integrated EMI shielding make this the definitive 9005 HB3 LED upgrade on the market.

Running at 70W per set, the 9005 Pro's IC thermal controller pairs with a high-speed smart fan to actively pull heat away from the diodes — extending LED life and maintaining consistent output even on the longest trail runs. The fully rotatable collar lets you fine-tune the beam pattern for perfect cutoff alignment in both projector and reflector housings, while built-in reverse polarity protection means you can't wire it wrong. Backed by a 3-year warranty, this kit is engineered for enthusiasts who demand maximum visibility without compromise.

The 9005 Pro Series fits any vehicle running a 9005 / HB3 single-beam socket — one of the most common high beam fitments across domestic trucks, SUVs, and off-road platforms. Installation is plug-and-play with no relay harness required in most applications. For vehicles with CANBUS systems or LED warning lights, a CANBUS decoder is recommended. Pair with a quality relay harness on high-draw or older wiring applications for maximum output and longevity.

Why Choose the Heise 9005 Pro Series LED Kit?

• 16,000-Lumen Output: 260% brighter than stock halogen 9005 / HB3 bulbs for dramatically improved night visibility on and off the trail.
• 70W Per Set: High-output power draw engineered for maximum lumen delivery without overloading factory wiring.
• 2 mm Solid Copper Thermodynamic Core: Efficiently pulls heat away from the LED chipset, extending bulb life and maintaining consistent output under sustained use.
• IC Thermal Controller + Smart Fan: Active cooling system keeps operating temps at just 46.1°C even during extended high-output use.
• Rotatable Collar: Dial in your exact beam pattern for proper cutoff alignment in projector or reflector housings.
• Slim Side-Cable Connection: Clean, compact connector fits tight engine bays common on trucks and SUVs without modification.
• Built-In EMI Filter: Eliminates radio static and interference — critical for off-road rigs running CB, ham radio, or GPS systems.
• 3-Year Warranty: Heise stands behind the 9005 Pro Series with one of the strongest warranties in the LED headlight segment.

Installation & Compatibility Recommendations

The Heise 9005 Pro Series installs directly into any 9005 / HB3 socket with no modifications required in most vehicles. The single-beam design handles one beam function (typically high beam) per bulb, making it a true drop-in replacement for 9005 applications. For vehicles with CANBUS error detection (common on European platforms and some newer trucks), add a CANBUS decoder to prevent flickering or error codes. On high-draw applications or older wiring, a relay harness is recommended to ensure the full 70W draw is sourced directly from the battery rather than through aging factory wiring. The rotatable collar should be adjusted after installation with the headlights aimed at a wall to confirm proper beam cutoff before driving.

Full Specifications

Frequently Asked Questions

What amp rating do I need for the Heise 9005 Pro?
The 9005 Pro draws 70W per set (35W per bulb), roughly 5.8A per bulb at 12V. Factory 9005 wiring can typically handle this, but a relay harness is recommended for older vehicles or sustained high-use applications to protect factory connectors and maximize output.

Can I use the 9005 Pro for daily driving?
The 9005 Pro is labeled for off-road use only, as aftermarket LED kits are not DOT-certified for on-road use in the US. Many enthusiasts use them for off-road, overlanding, and trail driving where DOT compliance is not required.

Will the 9005 Pro work in my projector headlight housing?
Yes — the rotatable collar allows you to adjust the LED chip orientation for proper beam cutoff alignment in both projector and reflector housings. Projector housings typically produce the cleanest beam pattern with LED bulbs.

Do I need a CANBUS decoder?
On most older trucks and SUVs with 9005 sockets, no decoder is needed. If your vehicle has a CANBUS system that monitors bulb resistance, you may see a warning light or flickering — a CANBUS decoder resolves this instantly.