DC Audio NEO COAXIAL CF 8" Full Range Pro Audio

DC Audio NEO COAXIAL CF 8" Full Range Pro Audio is an 8-inch coaxial driver built for high-output pro-installations, pairing 200 W mid-power (via a 50 mm voice coil) with 50 W for the highs to deliver broad, controlled range from 120 Hz to 20 kHz.

• Impedance: 4 or 8 ohms — matches a wide range of amplifiers and loading conditions to optimize voltage and current delivery.
• Mid Power Rating: 200 watts via a 50 mm voice coil — supports strong midrange output with reliable thermal handling when paired with proper crossover and power settings.
• Highs Power Rating: 50 watts — indicates the tweeter section’s power handling capability, helping prevent distortion when high-frequency content is present with proper crossovers.
• Frequency Response: 120 Hz–20 kHz (HF crossover at 1.2 kHz or higher) — defines the overall usable spectrum and the recommended high-frequency crossover point for the highs driver.
• Mid Crossover: 120 Hz–20 kHz — establishes where the mid-range path covers the spectrum and how it blends with the highs path for coherent output.
• HF Crossover: 1.2 kHz–20 kHz — the upper crossover point used to route high-frequency content to the tweeter, shaping treble response.
• Voice Coil Diameter: 50 mm — larger coil supports higher power handling and improved heat dissipation in the mid-range path.
• Cutout: 7.3" — required mounting hole diameter for installation.
• Mounting Depth: 4.75" / 120 mm — depth requirement that influences enclosure or cavity fitment and install practicality.
• Motor Diameter: 2.95" / 75 mm — a large motor contributes to control of cone motion at high output in pro-grade use.
• Frame: Cast frame — provides rigidity and heat management for demanding high-output operation.
• Sold: Sold in individuals — each unit is a single driver for flexible multi-driver configurations.
• Pro-Install Note: These speakers are for high-output applications and 99% of the time require custom installations or modifications to fit the massive motor and frame used for the Pro Audio lineup.
• Operating Mode: Run fully active with mids and horns on separate channels set at the appropriate crossover and power settings — supports bi-amped systems with dedicated control over mid and high-frequency paths.

In a real car audio build, this DC Audio NEO CF 8" coaxial excels as a dedicated high-output front-stage option or monitor where space and installation are managed with a custom mount. Its 120 Hz–20 kHz range and separate mid/high crossover structure enable coherent imaging and strong midrange presence while delivering controlled treble with proper crossovers and amplification. The large 50 mm voice coil and cast frame support sustained power handling, while 4- or 8-ohm options provide flexibility to match a range of amplifiers and system topologies. Because of its sizable cutout and mounting depth, plan for a tailored installation solution that accommodates the motor and frame characteristic of the Pro Audio lineup.