DC Audio MB-10 10" LF Pro Audio Speaker

The DC Audio MB-10 LF Pro Audio Speaker is a 10-inch low-frequency driver built for high-output pro-audio installations, offering a rebuildable voice coil design and a ferrite motor for solid bass control in demanding builds.

• 10" mid-bass driver with ferrite motor: A rugged magnet structure provides dependable power handling and a compact footprint for high-SPL applications.
• Paper cone with inverted surround (optional standard surround): Lightweight, stiff cone geometry with edge support that helps maintain cone control at high excursion; option to swap to a standard surround if needed.
• Power rating: 1000W RMS / 2000W Program: Handles substantial continuous and peak power, giving you headroom for loud, dynamic bass without clipping when paired with the right amp.
• 3.0” voice coil with multiple coil options (SVC1 / SVC2 / DVC1 / DVC2 / DVC4): Configurable coil options support different impedance and power needs, enabling customization for various amplifier and enclosure setups.
• Rebuildable: Designed for serviceability in pro installations, allowing maintenance or rebuilds to extend usable life in demanding environments.
• Frequency response: 40 Hz – 2.5 kHz: Covers deep bass up into lower midrange, enabling a focused low-end presence within a dedicated enclosure or multi-driver system.
• Sensitivity: 84.1 dB @ 1W/1m: Indicates relative loudness at a given input, useful for estimating required wattage in a real-world system.
• Cutout: 9.35" • Mounting depth: 6.25" • Cast frame: Large mounting hole and substantial depth require a proportionate opening and rigid mounting for accurate bass control; cast frame adds rigidity and heat handling.
• Outer frame lip machined for counter-sunk mounting (OD 10 7/16" with no gasket): Specialized frame modification allows installation in tighter or custom enclosures with precise bezels.
• Sold in individuals: Priced and sold as single units, not as a pair.
• T/S parameters: RE 1.7 ohm; MMS 166.7 g; QTS 0.63; QMS 5.57; QES 0.71; VAS 0.43 cf; FS 42.4; SD 50.3
• High-output applications note: These speakers are built for serious SPL and often require custom installations or modifications to fit the large motor and frame used in the Pro Audio lineup.

In a vehicle or dedicated install, the MB-10 excels where a robust 10" driver is needed to deliver controlled bass at high output. Its substantial motor, rebuildable design, and multiple coil options make it adaptable to demanding amps and enclosure strategies, while the machined frame lip and large cutout indicate a need for careful mounting and compatibility planning in custom builds.