Description
Description
The Deaf Bonce Apocalypse ASA-8000.1 is a 1-channel amplifier delivering up to 8000 W RMS into 1 Ohm at 14.4 V, built for extreme subwoofer rigs in premium car audio builds.
- 1 Channel: Single-channel amplifier designed for dedicated bass/subwoofer duty with high output.
- Class D: The amplifier is the Class D design in this model, intended for high-power bass applications.
- RMS Power (14.4 V) 1 Ohm: 8000 W; provides maximum obtainable power when the supply is at 14.4 V into a 1 Ohm load for very loud bass.
- RMS Power (12 V) 1 Ohm: 5850 W; still heavy-duty output when vehicle voltage is around 12 V.
- RMS Power (14.4 V) 2 Ohm: 4530 W; strong performance into a 2 Ohm load at 14.4 V.
- RMS Power (14.4 V) 4 Ohm: 2950 W; substantial output into a 4 Ohm load at 14.4 V.
- Minimum permissible load on the channel: 1 Ohm; the amp is rated to operate down to 1 Ohm but not below.
- Low pass filter: 35 - 250 Hz; limits output to bass frequencies to better control sub performance.
- Crossover: 24 dB/Oct; provides a steep roll-off to separate bass from higher frequencies more decisively.
- Subsonic filter: 10 - 50 Hz; removes ultra-low frequencies to protect speakers and tighten bass.
- Input terminal: 0 Ga; high-current input designed for robust signal delivery.
- Output terminal: 8 Ga; supports strong current flow to the speaker load.
- Working voltage: 9 - 15 V; designed to operate within typical automotive electrical systems.
- Signal-to-noise ratio: ≥ 85 dB; indicates a low noise floor relative to the signal for cleaner bass at high output.
- Size (WxLxH): 35.1 x 9.4 x 2.5 inch; dimensions suitable for trunk or under-seat installations with ample mounting space.
The ASA-8000.1 is built for demanding, high-current bass channels in premium builds. Its 1 Ohm capability, wide operating voltage range, and robust wiring compatibility enable a single, powerful subwoofer channel with controlled, low-noise output. The adjustable low-pass and subsonic filters, along with a steep 24 dB/Oct crossover, provide precise bass shaping to suit sealed or vented enclosures, while the chassis size fits larger installations where headroom matters.
| Model | ASA-8000.1 |
| Class | D |
| Number of the channels | 1 |
| Frequency response | 10 - 250 Hz |
| 1 Ohm RMS Power (14.4 V) | 8000 W |
| 1 Ohm RMS Power (12 V) | 5850 W |
| 2 Ohm RMS Power (14.4 V) | 4530 W |
| 4 Ohm RMS Power (14.4 V) | 2950 W |
| Minimum permissible load on the channel | 1 Ohm |
| Low pass filter | 35 - 250 Hz |
| Crossover | 24 dB/Oct |
| Subsonic filter | 10 - 50 Hz |
| Input terminal | 0 Ga |
| Output terminal | 8 Ga |
| Working voltage | 9 - 15 V |
| Signal-to-noise ratio | ≥ 85 dB |
| Size (WxLxH) | 35.1 x 9.4 x 2.5 inch |


