{"product_id":"alliance-audio-vl2000d-monoblock-class-d-amplifier","title":"Alliance Audio VL2000D Monoblock Class D Amplifier","description":"\u003cp\u003eThe \u003cstrong\u003eAlliance Audio VL2000D\u003c\/strong\u003e is a compact, high-efficiency \u003cstrong\u003emonoblock Class D amplifier\u003c\/strong\u003e delivering \u003cstrong\u003e500 watts RMS at 1 ohm\u003c\/strong\u003e — 2000 watts peak — in a slim chassis measuring just 14.7 cm × 21.6 cm × 4.8 cm. Sitting squarely between the VL1500D and VL3000D in the Alliance Audio VL mono lineup, the VL2000D is the sweet spot for enthusiasts who want serious sub-bass output in a stealth install package. Its \u003cstrong\u003eClass D topology\u003c\/strong\u003e runs approximately 80% more efficiently than traditional Class A\/B amplifiers, keeping heat low and power delivery consistent during extended high-volume listening — all while drawing just 59A at max and 31A during real-world music playback.\u003c\/p\u003e\u003cp\u003ePrecision tuning is built in: the VL2000D features a variable \u003cstrong\u003elow-pass filter (50Hz–220Hz)\u003c\/strong\u003e, a \u003cstrong\u003esubsonic\/high-pass filter (10Hz–50Hz)\u003c\/strong\u003e, and a \u003cstrong\u003e0–12dB variable bass boost\u003c\/strong\u003e for dialing in your exact sub-bass response without an external processor. A \u003cstrong\u003edamping factor of 150\u003c\/strong\u003e and \u003cstrong\u003e92dB signal-to-noise ratio\u003c\/strong\u003e ensure tight, controlled woofer movement and clean, low-noise amplification at every output level. The wide \u003cstrong\u003einput sensitivity range of 0.2V–9V\u003c\/strong\u003e makes it compatible with factory head units and aftermarket decks without additional signal adapters, and the included \u003cstrong\u003ewired sub-level remote\u003c\/strong\u003e puts bass control at your fingertips from the driver's seat. Alliance Audio recommends a 50A inline fuse for safe, reliable operation.\u003c\/p\u003e\u003cp\u003eAt \u003cstrong\u003eTrinity Car Audio\u003c\/strong\u003e, the VL2000D is an ideal power plant for a single 10\", 12\", or 15\" subwoofer rated 250–500W RMS in a ported or sealed enclosure. Wire a dual 2-ohm DVC subwoofer in parallel to 1 ohm to unlock the full 500W RMS output, or run a dual 4-ohm DVC woofer in parallel to 2 ohms for a more conservative 250W RMS daily driver setup. Whether you're building a clean under-seat install or a trunk-mounted bass system, the Alliance Audio VL2000D delivers the power, precision, and compact footprint to make your low end hit hard without taking over your vehicle.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the Alliance Audio VL2000D?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS at 1 Ohm:\u003c\/strong\u003e Stable 1-ohm operation lets you wire dual voice coil subwoofers in parallel for maximum power transfer and deep, authoritative bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweet Spot in the VL Mono Lineup:\u003c\/strong\u003e More power than the VL1500D, more compact than the VL3000D — the VL2000D hits the ideal balance of output and install flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Compact 4.8 cm Mounting Depth:\u003c\/strong\u003e Fits under seats, behind panels, and in tight trunk corners where full-size mono amps simply won't go.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Efficiency Class D Topology:\u003c\/strong\u003e Runs ~80% more efficiently than Class A\/B, generating less heat and drawing less current for the same output level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping Factor of 150:\u003c\/strong\u003e Delivers precise, controlled woofer movement for punchy, accurate sub-bass rather than loose, boomy output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost (0–12dB):\u003c\/strong\u003e Fine-tune your low-frequency emphasis on the fly without an outboard equalizer or signal processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Sub Control Included:\u003c\/strong\u003e Adjust bass level from the driver's seat without touching the amp — essential for daily driver builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Crossover Filters:\u003c\/strong\u003e Onboard LPF (50–220Hz) and subsonic filter (10–50Hz) protect your subwoofer and keep your bass tight, clean, and distortion-free.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Subwoofer Pairing Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe VL2000D pairs best with a single subwoofer rated between 250–500W RMS. A dual 2-ohm DVC subwoofer wired in parallel to 1 ohm will unlock the full 500W RMS output. For a more conservative daily driver setup, wire a dual 4-ohm DVC woofer in parallel to 2 ohms for 250W RMS with lower thermal demand. For ported enclosures, set the low-pass filter between 80–120Hz and the subsonic filter at 25–35Hz to protect the woofer below the box's tuning frequency. For sealed enclosures, a low-pass setting of 80Hz with the subsonic filter at 20–25Hz is typically sufficient. Wire the amp with a minimum 4-gauge power and ground cable, and install a 50A inline fuse within 18 inches of the battery per Alliance Audio's recommendation.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAlliance Audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eVL2000D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Class\u003c\/td\u003e\n\u003ctd\u003eClass D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003e1 (Monoblock)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Power\u003c\/td\u003e\n\u003ctd\u003e2000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS Power @ 1Ω \/ 14.4V\u003c\/td\u003e\n\u003ctd\u003e500W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS Power @ 2Ω \/ 14.4V\u003c\/td\u003e\n\u003ctd\u003e250W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS Power @ 4Ω \/ 14.4V\u003c\/td\u003e\n\u003ctd\u003e125W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e15Hz – 250Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-Noise Ratio\u003c\/td\u003e\n\u003ctd\u003e92dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Sensitivity\u003c\/td\u003e\n\u003ctd\u003e0.2V – 9V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Factor\u003c\/td\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e9V – 16V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh Pass \/ Subsonic Filter\u003c\/td\u003e\n\u003ctd\u003e10Hz – 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow Pass Filter\u003c\/td\u003e\n\u003ctd\u003e50Hz – 220Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBass Boost\u003c\/td\u003e\n\u003ctd\u003e0 – 12dB Variable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Current Draw\u003c\/td\u003e\n\u003ctd\u003e59A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMusic Current Draw\u003c\/td\u003e\n\u003ctd\u003e31A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse Recommendation\u003c\/td\u003e\n\u003ctd\u003e50A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W × L × H)\u003c\/td\u003e\n\u003ctd\u003e14.7 cm × 21.6 cm × 4.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the VL2000D compare to the VL1500D and VL3000D?\u003c\/strong\u003e\u003cbr\u003eThe VL2000D delivers 500W RMS at 1 ohm — 33% more than the VL1500D (375W) and two-thirds the output of the VL3000D (750W). It's the ideal middle-ground choice for builds that need more power than the VL1500D but don't require the full output of the VL3000D.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat subwoofer pairs best with the VL2000D?\u003c\/strong\u003e\u003cbr\u003eA single 10\", 12\", or 15\" subwoofer rated 250–500W RMS is ideal. A dual 2-ohm DVC subwoofer wired in parallel to 1 ohm will unlock the full 500W RMS output for maximum impact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the VL2000D with a factory head unit?\u003c\/strong\u003e\u003cbr\u003eYes. The 0.2V–9V input sensitivity range is compatible with low-voltage factory outputs in most vehicles. No line output converter is required in the majority of OEM applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power wire and fuse do I need?\u003c\/strong\u003e\u003cbr\u003eUse a minimum 4-gauge power and ground cable. Install a 50A inline fuse within 18 inches of the battery per Alliance Audio's recommendation for safe, reliable operation.\u003c\/p\u003e","brand":"Alliance Audio","offers":[{"title":"Default Title","offer_id":43697597382723,"sku":"VL2000D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/VL2000D_Front-1.png?v=1787241689","url":"https:\/\/www.trinitycaraudio.com\/products\/alliance-audio-vl2000d-monoblock-class-d-amplifier","provider":"Trinity Car Audio","version":"1.0","type":"link"}