Trinity Audio Single B Series 12" Subwoofer & 2000.1v2 2,000 Watt Monoblock Amplifier
Trinity Audio Single B Series 12" Subwoofer & 2000.1v2 2,000 Watt Monoblock Amplifier is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Description
Description
The Trinity B Series 12" Subwoofer delivers extreme bass clarity with high-excursion design and 1,500W RMS power handling, making it a go-to for bass enthusiasts who want deep, controlled low end without complex installs.
- 12" driver with 3" high-temperature dual voice coil: supports high power handling and efficient heat dissipation for sustained bass play at elevated output levels.
- 1,500W RMS power handling: allows serious bass enthusiasts to pair with capable amplification for loud, clean low end when matched to the right system.
- High excursion with 10" spiders: enables greater cone travel, translating to deeper bass and more dynamic output in musical passages and cinematic scenes.
- Double-stacked motor design with FEA cooling: improves thermal management so the motor remains stable under heavy use, preserving control and clarity.
- Versatile enclosure compatibility: designed to perform well in ported, 4th order, and 6th order bandpass boxes for tailored bass response in varied vehicle cargo spaces.
- Durable cast basket and all-black finish: provides rigid construction and an aesthetic that suits premium installations while resisting flex and wear.
- Impedance options and coil configuration: B12 D2 (dual 2-ohm) or B12 D4 (dual 4-ohm) voice coils; each variant supports specific amplifier loads for optimized damping and control.
- Key specs (D2/D4): FS 28.6 Hz / 30.9 Hz; Re 1.9 Ω + 1.9 Ω / 3.2 Ω + 3.2 Ω; Qms 6.07 / 5.85; Qes 0.57 / 0.64; Qts 0.52 / 0.57; Mms 410 / 352.1; Cms 0.08; Sd 82.15 in²; Vas ~29.9 L; SPL 88.7 dB / 89.2 dB; BL 22.2 / 26.2; X-max 18 mm
- Physical fit: Outer Diameter 12.8 in; Cutout Diameter 11.22 in; Mounting Depth 7.6 in; Displacement 0.25 ft³; Coil Dimensions 3" x 50 mm
- Recone kits: available to maintain peak performance over time.
- Warranty: 1-year manufacturer warranty.
In a real car audio build, this sub excels in systems that balance power and enclosure flexibility. Its dual-voice-coil options pair with a range of amplifiers, and its wide enclosure compatibility helps maximize bass response across common 12" mounting spaces. The combination of high excursion, robust cooling, and a durable cast basket translates to strong, controlled bass from compact to moderately large enclosures, with recone support to protect long-term performance.
| Driver | B12 D2 | B12 D4 |
| FS | 28.6 Hz | 30.9 dB |
| Re | 1.9 Ω + 1.9 Ω | 3.2 Ω + 3.2 Ω |
| Qms | 6.07 | 5.85 |
| Qes | 0.57 | 0.64 |
| Qts | 0.52 | 0.57 |
| Mms | 410 | 352.1 |
| Cms | 0.08 | 0.08 |
| Sd | 82.15 in2 | 82.15 in2 |
| Vas | 29.9 L | 29.8 L |
| Spl | 88.7 dB | 89.2 dB |
| BL | 22.2 | 26.2 |
| X-max | 18mm | 18mm |
| Outer Diameter | 12.8 in | 12.8 in |
| Cutout Diameter | 11.22 in | 11.22 in |
| Motor Diameter | 7.8 in | 7.8 in |
| Mounting Depth | 7.6 in | 7.6 in |
| Displacement | .25 ft3 | .25 ft3 |
| Coil Dimensions | 3" x 50mm | 3" x 50mm |
| Coil Wire | Black Copper | Black Copper |
| Ferrite Grade | Y35 | Y35 |
| Terminal Wire Gauge | 8ga | 8ga |
| RMS Power | 1,500 | 1,500 |
| Burst Power | 4,500 | 4,500 |
| MODEL | 2000.1v2 |
| RMS @ 4 Ohms | 720 Watts |
| RMS @ 2 Ohms | 1100 Watts |
| RMS @ 1 Ohm | 2000 Watts |
| Total Harmonic Distortion | <.02% |
| Signal To Noise Ratio | 94db |
| Frequency Range | 10 Hz - 20,000 Hz |
| Signal Input Range | .4 - 7 VAC |
| DC Voltage Input Range | 9-16.5 VDC |
| Measurements In. (L x W x H) | 8" x 7.5" x 2.5" |
