{"title":"JBL","description":"\u003cp\u003eJBL has been engineering legendary sound for over 75 years — from concert halls and recording studios to the cars and trucks of enthusiasts worldwide. The JBL car audio lineup at Trinity Car Audio brings that same professional-grade acoustic engineering directly to your vehicle, spanning every component of a complete system: coaxial and component speakers, subwoofers, mono and multi-channel amplifiers, and integrated DSP amplifiers.\u003c\/p\u003e\n\n\u003cp\u003eEvery JBL car audio product is built around proven acoustic technologies developed across JBL's professional and consumer divisions. The patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e increases effective cone area for deeper bass and more musical body without upsizing. \u003cstrong\u003eTrue 4-ohm impedance design\u003c\/strong\u003e extracts maximum clean power from both factory head units and aftermarket amplifiers. \u003cstrong\u003eSelectable Smart Impedance (SSI™)\u003c\/strong\u003e technology on select subwoofers lets you switch between 2-ohm and 4-ohm operation without rewiring. And every JBL speaker is individually voiced by JBL's transducer engineers to deliver consistent, signature JBL sonic character across the entire lineup.\u003c\/p\u003e\n\n\u003cp\u003eThe JBL lineup at Trinity Car Audio is organized across three tiers — \u003cstrong\u003eStage Series\u003c\/strong\u003e for accessible, proven performance; \u003cstrong\u003eClub Series\u003c\/strong\u003e for enthusiast-grade output and features; and \u003cstrong\u003eStadium Series\u003c\/strong\u003e for flagship-level engineering with aluminum dome tweeters, high-resolution frequency response to 40kHz, and UniPivot tweeter mounts. Whether you're upgrading a single pair of door speakers or building a complete amplified system, JBL has a matched solution for every budget and install complexity.\u003c\/p\u003e","products":[{"product_id":"jbl-club-34f","title":"JBL Club 34F 3.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club 34F 3.5\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 25W RMS \/ 75W peak power at a 3.0-ohm nominal impedance, bringing JBL's Club Series Plus One™ cone architecture to the compact 3.5\" format. A meaningful upgrade over factory sound in the smallest common OEM speaker size — more bass output, cleaner highs, and 89dB sensitivity that performs well off both factory head units and aftermarket amplifiers.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e, which increases effective cone area beyond a standard 3.5\" driver for deeper bass extension and more musical body without upsizing. The cone is molded from \u003cstrong\u003eacoustically damped, UV-resistant polypropylene\u003c\/strong\u003e, engineered to handle the heat cycles, humidity, and UV exposure of real-world in-car environments without warping or degrading over time. Sensitivity reaches 89dB at 2.83V, giving you solid, efficient output whether you're running a factory head unit or an aftermarket amplifier. Frequency response spans 90Hz to 20kHz. The 3.0-ohm impedance is compatible with both factory and aftermarket sources. Larger magnets provide superior power handling compared to typical factory 3.5\" drivers. Weight: 0.9 kg.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a true drop-in for most vehicles with factory 3.5\" locations — common in dash, rear deck, and door applications across a wide range of vehicles. Pair with a 4-channel amplifier rated 20–40W RMS per channel for the best results, or run directly off a quality head unit. Note: at 90Hz low-frequency extension, these speakers work best paired with a subwoofer for full-range system coverage.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club 34F?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Cone Architecture:\u003c\/strong\u003e Increases effective cone area beyond a standard 3.5\" driver for deeper bass and more musical body — in the most compact common OEM speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Acoustically damped and built to survive the heat, humidity, and UV exposure of real-world in-car environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e89dB Sensitivity:\u003c\/strong\u003e Solid output efficiency — delivers strong output from both factory head units and aftermarket amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25W RMS \/ 75W Peak Power Handling:\u003c\/strong\u003e Superior power handling compared to typical factory 3.5\" drivers — handles real-world amplifier power without distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90Hz – 20kHz Frequency Response:\u003c\/strong\u003e Clean musical bandwidth from midrange punch to crisp high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Drop-In Fit:\u003c\/strong\u003e Designed for standard 3.5\" OEM locations — no cutting or fabrication required in most vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0-Ohm Impedance:\u003c\/strong\u003e Compatible with factory head units and aftermarket amplifiers for maximum install flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarger Magnets:\u003c\/strong\u003e Improved motor strength for better control and power handling than typical factory 3.5\" drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Club 34F's 89dB sensitivity makes it a solid performer off a factory head unit. For the best performance, pair with a 4-channel amp rated 20–40W RMS per channel, stable at 2–4 ohms. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker — choose an amp rated stable at 2–4 ohms. Mount in the factory 3.5\" location — no cutting or fabrication required in most vehicles. Use 16-gauge or heavier speaker wire for runs over 6 feet. Note: at 90Hz low-frequency extension, pairing with a subwoofer is strongly recommended for full-range system coverage.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub 34F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e25W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e75W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e89dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e90Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003eUV-Resistant Polypropylene (Plus One™ Architecture)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e0.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What vehicles commonly use 3.5\" speakers?\u003c\/strong\u003e\u003cbr\u003eA: 3.5\" speakers are common in dash locations across a wide range of vehicles, particularly older domestic vehicles and some import models. Contact us at Trinity Car Audio with your vehicle's year, make, and model to confirm fitment before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Club 34F off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the 89dB sensitivity and 3.0-ohm impedance work well with factory head units. You'll hear a noticeable improvement over OEM speakers immediately. Adding an external amplifier will unlock the full 25W RMS potential.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need a subwoofer with the Club 34F?\u003c\/strong\u003e\u003cbr\u003eA: The 34F's 90Hz low-frequency extension means it won't reproduce bass on its own. For full-range system coverage, pairing with a subwoofer is strongly recommended. The Club 34F handles midrange and highs; a subwoofer handles everything below 90Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Club 34F compare to the Club 44F?\u003c\/strong\u003e\u003cbr\u003eA: The Club 34F is a 3.5\" speaker for the smallest common OEM locations at 25W RMS. The Club 44F is a 4\" speaker for slightly larger OEM locations at 35W RMS. Both share the same Plus One™ cone architecture and 3.0-ohm impedance. Choose based on your vehicle's OEM speaker size.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698230591555,"sku":"JBLSPKCB34F","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_CLUB_34F_HERO_43393_x1_870aa976-a3a9-4bda-9217-32c6f905e7ed.png?v=1787255628"},{"product_id":"jbl-stage3-68f-6-1-2-165mm-coaxial-car-speakers","title":"JBL Stage3 68F 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage3 68F 6.5\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 70W RMS \/ 560W peak power at a True 4-ohm nominal impedance, bringing Stage3 Series glass-fiber engineering to the standard 6.5\" coaxial format. The grille-equipped sibling to the Stage3 68 — same Plus One™ glass-fiber cone, same True 4-ohm design, same PEI dome tweeter, with grilles included for a clean, finished look right out of the box.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e with a \u003cstrong\u003e10% glass-fiber reinforced polypropylene cone\u003c\/strong\u003e — the added rigidity reduces unwanted flex for tighter, more accurate bass reproduction with deeper extension down to 55Hz. The Plus One™ design increases effective cone area beyond a standard 6.5\" driver for more bass output and musical body without upsizing. Sensitivity reaches 91dB at 2.83V, and the \u003cstrong\u003eTrue 4-ohm impedance\u003c\/strong\u003e is optimized to extract maximum clean power from both factory head units and aftermarket amplifiers. The integrated \u003cstrong\u003ePEI balanced dome tweeter\u003c\/strong\u003e delivers smooth, detailed high-frequency reproduction that spreads evenly throughout the cabin without harshness or fatigue. Frequency response spans 55Hz to 20kHz for full musical coverage. Built with \u003cstrong\u003epost-consumer recycled plastics, PVC-free wiring, and soy-ink packaging\u003c\/strong\u003e — premium sound with a reduced environmental footprint.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a true drop-in for most vehicles with factory 6.5\" door locations. Pair with a 4-channel amplifier rated 40–80W RMS per channel for the best results, or run directly off a quality head unit — the True 4-ohm design and 91dB sensitivity make these a strong performer in head-unit-only setups. Ideal for everyday listening across all genres where you want noticeably better sound without a complex install.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage3 68F?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Plus One™ Cone:\u003c\/strong\u003e 10% glass-fiber reinforcement delivers tighter bass and more accurate midrange than standard polypropylene — in the most popular 6.5\" coaxial format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Impedance:\u003c\/strong\u003e Optimized for maximum clean power transfer from factory head units and aftermarket amplifiers — no impedance mismatch, no wasted watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Smooth, detailed high-frequency reproduction that spreads evenly throughout the cabin without harshness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91dB Sensitivity:\u003c\/strong\u003e Efficient design delivers solid output from both head units and amplifiers — a meaningful upgrade even without an external amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS \/ 560W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55Hz – 20kHz Frequency Response:\u003c\/strong\u003e Full musical bandwidth from punchy bass to crisp high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Drop-In Fit:\u003c\/strong\u003e Designed for standard 6.5\" OEM door locations — no cutting or fabrication required in most vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-Friendly Construction:\u003c\/strong\u003e Post-consumer recycled plastics, PVC-free wiring, and soy-ink packaging — premium performance with a lighter environmental footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Stage3 68F's True 4-ohm impedance and 91dB sensitivity make it a strong performer off a factory head unit — you'll hear a clear improvement over OEM speakers right out of the box. For the best performance, pair with a 4-channel amp rated 40–80W RMS per channel at 4 ohms. Mount in the factory 6.5\" door location — no cutting or fabrication required in most vehicles. Use 16-gauge or heavier speaker wire for runs over 6 feet.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE3 68F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e6.5\" (165mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e70W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e560W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e91dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e55Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (True 4-Ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003eGlass-Fiber Reinforced Polypropylene (Plus One™)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003ePEI Balanced Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePost-Consumer Recycled Plastics, PVC-Free Wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Stage3 68F and the Stage3 68?\u003c\/strong\u003e\u003cbr\u003eA: Both are 6.5\" 2-way coaxials sharing the same Plus One™ glass-fiber cone, True 4-ohm design, PEI dome tweeter, power handling, and sensitivity specs. The 68F includes grilles for a clean, finished look; the Stage3 68 does not include grilles. Choose the 68F if you want grilles included; choose the Stage3 68 if you'll use factory grilles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stage3 68F off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the True 4-ohm impedance and 91dB sensitivity are designed to work well with factory head units. You'll hear a clear improvement over OEM speakers immediately. An external amplifier will unlock the full 70W RMS potential for even better dynamics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Stage3 68F?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 40–80W RMS per channel at 4 ohms is ideal. The True 4-ohm design ensures clean, efficient power transfer without impedance mismatch issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Stage3 68F fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: The Stage3 68F is designed for standard 6.5\" OEM door locations — one of the most common speaker sizes across virtually all vehicle makes and models. Contact us at Trinity Car Audio with your year, make, and model to confirm fitment before ordering.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698231803971,"sku":"JBLSPKS368F","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_3_CAR_AUDIO_68F_HERO_0029_x1_7c1c3664-eba1-4e97-a2ef-fca7141ec451.png?v=1787255659"},{"product_id":"jbl-stage3-38f","title":"JBL Stage3 38F 3.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage3 38F 3.5\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 50W RMS \/ 400W peak power at a True 4-ohm nominal impedance, bringing Stage3 Series glass-fiber engineering to the compact 3.5\" format. A meaningful upgrade over factory sound in the smallest common OEM speaker size — more bass output, cleaner highs, and a True 4-ohm design that works equally well off a head unit or an amp. Built with eco-friendly recycled plastics and PVC-free wiring.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e with a \u003cstrong\u003e10% glass-fiber reinforced cone\u003c\/strong\u003e — the added rigidity reduces unwanted flex for tighter, more accurate bass reproduction with frequency response reaching down to 90Hz. The Plus One™ design increases effective cone area beyond a standard 3.5\" driver for more bass output and musical body without upsizing. Sensitivity reaches 88dB at 2.83V, and the \u003cstrong\u003eTrue 4-ohm impedance\u003c\/strong\u003e is optimized to extract maximum clean power from both factory head units and aftermarket amplifiers. The integrated \u003cstrong\u003ePEI balanced dome tweeter\u003c\/strong\u003e delivers smooth, detailed high-frequency reproduction without harshness or fatigue at any volume. Frequency response spans 90Hz to 20kHz. Built with \u003cstrong\u003epost-consumer recycled plastics and PVC-free wiring\u003c\/strong\u003e — premium sound with a reduced environmental footprint. Weight: 0.9 kg.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a true drop-in for most vehicles with factory 3.5\" locations — common in dash, rear deck, and door applications. Pair with a 4-channel amplifier rated 30–60W RMS per channel for the best results, or run directly off a quality head unit. Note: at 90Hz low-frequency extension, these speakers work best paired with a subwoofer for full-range system coverage.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage3 38F?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Plus One™ Cone:\u003c\/strong\u003e 10% glass-fiber reinforcement delivers tighter bass and more accurate midrange than standard polypropylene — in the most compact common OEM speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Impedance:\u003c\/strong\u003e Optimized for maximum clean power transfer from factory head units and aftermarket amplifiers — no impedance mismatch, no wasted watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Smooth, detailed high-frequency reproduction that spreads evenly throughout the cabin without harshness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e88dB Sensitivity:\u003c\/strong\u003e Efficient design delivers solid output from both head units and amplifiers — a meaningful upgrade even without an external amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS \/ 400W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression — significantly more than typical factory 3.5\" drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90Hz – 20kHz Frequency Response:\u003c\/strong\u003e Clean musical bandwidth from midrange punch to crisp high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Drop-In Fit:\u003c\/strong\u003e Designed for standard 3.5\" OEM locations — no cutting or fabrication required in most vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-Friendly Construction:\u003c\/strong\u003e Post-consumer recycled plastics and PVC-free wiring — premium performance with a lighter environmental footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Stage3 38F's True 4-ohm impedance and 88dB sensitivity make it a solid performer off a factory head unit. For the best performance, pair with a 4-channel amp rated 30–60W RMS per channel at 4 ohms. Mount in the factory 3.5\" location — no cutting or fabrication required in most vehicles. Use 16-gauge or heavier speaker wire for runs over 6 feet. Note: at 90Hz low-frequency extension, pairing with a subwoofer is strongly recommended for full-range system coverage.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE3 38F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e3.5\" (89mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e50W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e400W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e88dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e90Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (True 4-Ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass-Fiber Reinforced (10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003ePEI Balanced Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePost-Consumer Recycled Plastics, PVC-Free Wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What vehicles commonly use 3.5\" speakers?\u003c\/strong\u003e\u003cbr\u003eA: 3.5\" speakers are common in dash locations across a wide range of vehicles, particularly older domestic vehicles and some import models. Contact us at Trinity Car Audio with your vehicle's year, make, and model to confirm fitment before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Stage3 38F compare to the Club 34F?\u003c\/strong\u003e\u003cbr\u003eA: Both are 3.5\" coaxials at the same power handling and weight. The Stage3 38F uses a glass-fiber reinforced Plus One™ cone and True 4-ohm design at 50W RMS. The Club 34F uses a UV-resistant polypropylene Plus One™ cone at 25W RMS with a 3.0-ohm impedance. The Stage3 38F offers more power handling and True 4-ohm simplicity; the Club 34F offers broader amplifier compatibility at 3.0 ohms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stage3 38F off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the True 4-ohm impedance and 88dB sensitivity are designed to work well with factory head units. You'll hear a clear improvement over OEM speakers immediately. An external amplifier will unlock the full 50W RMS potential.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need a subwoofer with the Stage3 38F?\u003c\/strong\u003e\u003cbr\u003eA: The 38F's 90Hz low-frequency extension means it won't reproduce bass on its own. For full-range system coverage, pairing with a subwoofer is strongly recommended. The Stage3 38F handles midrange and highs; a subwoofer handles everything below 90Hz.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698231902275,"sku":"JBLSPKS338F","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_3_CAR_AUDIO_38F_HERO_0063_x1_df18be2a-30ce-43c6-a5da-66a207e006b0.png?v=1787255670"},{"product_id":"jbl-stage-102-car-subwoofer","title":"JBL Stage 102 10\" 225W Car Subwoofer","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage 102 10\" 225W Car Subwoofer\u003c\/strong\u003e delivers 225W RMS \/ 900W peak power at a single 4-ohm impedance, individually voiced by JBL's acoustic engineers to deliver that unmistakable JBL signature bass character. The 10\" sibling to the Stage 122, the Stage 102 brings the same JBL-voiced sonic character and polypropylene cone construction to a more compact footprint — ideal for builds where a 12\" won't fit but you still want proven JBL Stage Series bass.\u003c\/p\u003e\n\n\u003cp\u003eThe Stage 102 is built around a \u003cstrong\u003epolypropylene cone\u003c\/strong\u003e — lightweight and rigid for accurate, low-distortion bass reproduction with frequency response reaching down to 35Hz. The \u003cstrong\u003ehi-roll rubber surround\u003c\/strong\u003e maximizes cone excursion for deep, punchy bass while maintaining long-term durability in demanding in-car environments. The \u003cstrong\u003e38.8mm voice coil\u003c\/strong\u003e handles the 225W RMS thermal load efficiently, and the single \u003cstrong\u003e4-ohm impedance\u003c\/strong\u003e keeps wiring simple — connect directly to any mono amplifier rated at 4 ohms without worrying about DVC wiring configurations. Sensitivity reaches 89dB at 2.83V. Frequency response spans 35Hz to 200Hz, covering the full subwoofer range from deep sub-bass to upper bass punch. Each Stage 102 is \u003cstrong\u003eindividually voiced by JBL acoustic engineers\u003c\/strong\u003e to ensure consistent sonic character across the lineup.\u003c\/p\u003e\n\n\u003cp\u003ePair the Stage 102 with a mono amplifier rated 150–225W RMS at 4 ohms. The JBL Stage GT 50011 at 300W RMS (4 ohms) provides ample headroom — keep gain conservative to stay within the sub's 225W RMS rating. Use a ported enclosure tuned to 35–40Hz for maximum output, or a sealed enclosure for tighter, more accurate bass. The single 4-ohm impedance makes this one of the simplest subwoofers to wire and integrate into any system.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage 102?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividually Voiced by JBL Acoustic Engineers:\u003c\/strong\u003e Each unit is tuned to deliver consistent JBL signature bass character — not just spec-matched, but sonically validated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Lightweight and rigid for accurate, low-distortion bass reproduction down to 35Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Roll Rubber Surround:\u003c\/strong\u003e Maximizes cone excursion for deep, punchy bass while maintaining long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e89dB Sensitivity:\u003c\/strong\u003e Efficient design delivers strong bass output without taxing your amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e225W RMS \/ 900W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Impedance:\u003c\/strong\u003e Simple, straightforward wiring — no DVC configurations to manage, connects directly to any 4-ohm mono amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35Hz – 200Hz Frequency Response:\u003c\/strong\u003e Deep sub-bass extension to upper bass punch — full subwoofer bandwidth coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 10\" Footprint:\u003c\/strong\u003e JBL Stage Series engineering in a smaller package — ideal for builds where a 12\" won't fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Enclosure Recommendations\u003c\/h2\u003e\n\u003cp\u003ePair the Stage 102 with a mono amplifier rated 150–225W RMS at 4 ohms. The JBL Stage GT 50011 at 300W RMS (4 ohms) works well — keep the gain conservative to stay within the sub's 225W RMS rating. For enclosures: a ported box tuned to 35–40Hz maximizes output for hip-hop, EDM, and bass-heavy music. A sealed enclosure delivers tighter, more accurate bass for rock, jazz, and everyday listening. Set your amplifier's low-pass crossover at 80Hz and subsonic filter at 30Hz for ported enclosures. Use 8 AWG or heavier speaker wire from amp to sub, and 4-gauge power and ground wire to your amplifier.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eStage 102\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e225W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e900W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e89dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e35Hz – 200Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (Single Voice Coil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice Coil Diameter\u003c\/td\u003e\n\u003ctd\u003e38.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone Material\u003c\/td\u003e\n\u003ctd\u003ePolypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround Material\u003c\/td\u003e\n\u003ctd\u003eHi-Roll Rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier pairs best with the Stage 102?\u003c\/strong\u003e\u003cbr\u003eA: A mono amplifier rated 150–225W RMS at 4 ohms is ideal. The JBL Stage GT 50011 at 300W RMS (4 ohms) works well — keep the gain conservative to stay within the sub's 225W RMS rating. Contact us at Trinity Car Audio for a specific amp recommendation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Stage 102 compare to the Stage 122?\u003c\/strong\u003e\u003cbr\u003eA: The Stage 102 is a 10\" sub at 225W RMS — more compact, ideal for builds where a 12\" won't fit. The Stage 122 is a 12\" sub at 250W RMS for more cone area, slightly deeper bass extension (34Hz vs 35Hz), and a touch more output. Both share the same JBL-voiced sonic character, polypropylene cone, and single 4-ohm impedance. Choose based on available enclosure space.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the Stage 102 a single or dual voice coil subwoofer?\u003c\/strong\u003e\u003cbr\u003eA: The Stage 102 is a single voice coil (SVC) subwoofer at 4 ohms. This makes wiring simple and straightforward — connect directly to any 4-ohm mono amplifier. If you need impedance flexibility, consider the JBL Club 102 with SSI™ selectable impedance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What enclosure type should I use with the Stage 102?\u003c\/strong\u003e\u003cbr\u003eA: A ported enclosure tuned to 35–40Hz maximizes output for bass-heavy music. A sealed enclosure delivers tighter, more accurate bass for everyday listening. Contact us at Trinity Car Audio for specific enclosure volume and tuning recommendations for your vehicle.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698234818627,"sku":"JBLSUBST102AM","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/2_JBL_STAGE_102_SPEAKER_FRONT_0509_x1_df760ad2-b38a-4fde-9e18-d188b876aa8b.png?v=1787264916"},{"product_id":"jbl-club-122sl","title":"JBL Club 122SL 12\" Shallow-Mount SSI Subwoofer","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club 122SL 12\" Shallow-Mount SSI Subwoofer\u003c\/strong\u003e delivers 400W RMS \/ 1,200W peak power with \u003cstrong\u003eSelectable Smart Impedance (SSI™) technology\u003c\/strong\u003e and an ultra-shallow \u003cstrong\u003e83mm (3.27\") mounting depth\u003c\/strong\u003e — the 12\" sibling to the Club 102SL, bringing Club Series 12\" bass output to locations where a standard-depth subwoofer simply won't fit. Trucks, SUVs, sedans with limited trunk depth, and behind-seat installs — the Club 122SL delivers serious low-end in a low-profile package.\u003c\/p\u003e\n\n\u003cp\u003eThe SSI™ system lets you switch between \u003cstrong\u003e2 ohms\u003c\/strong\u003e for maximum power output from a high-current amplifier, or \u003cstrong\u003e4 ohms\u003c\/strong\u003e for cleaner, more efficient operation — no rewiring, no separate DVC configurations. The \u003cstrong\u003erigid aluminum cone\u003c\/strong\u003e is the key differentiator from the standard Club 122's polypropylene cone — aluminum's higher stiffness-to-mass ratio allows for accurate bass reproduction at the shallow excursion depths that a low-profile motor structure requires, while keeping distortion ultra-low even at full output. The \u003cstrong\u003ehigh-roll rubber surround\u003c\/strong\u003e maximizes available cone excursion within the shallow motor structure for the deepest possible bass from a low-profile design. The \u003cstrong\u003evented basket\u003c\/strong\u003e channels moving air across the 50mm voice coil to dissipate heat during high-output operation, keeping thermals low and performance consistent. Sensitivity is 85dB at 1W\/1m; frequency response spans 30Hz to 500Hz. Cutout diameter is 27.9cm. The \u003cstrong\u003esignature inverted dust cap and hidden fastener trim ring\u003c\/strong\u003e deliver a clean, custom look. Weight: 5.5 kg.\u003c\/p\u003e\n\n\u003cp\u003ePair the Club 122SL with a mono amplifier rated 300–400W RMS at your chosen impedance. The JBL Club A600 at 350W RMS (4 ohms) or 600W RMS (2 ohms) is a natural match — keep gain conservative at 2 ohms. Use a sealed shallow-mount enclosure or a purpose-built shallow ported enclosure. The 83mm mounting depth opens up behind-seat, under-floor, and shallow trunk locations that standard 12\" subwoofers can't access.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club 122SL?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e83mm Shallow Mounting Depth:\u003c\/strong\u003e Fits behind seats, under floors, and in shallow trunk locations where standard 12\" subwoofers won't fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSI™ Selectable Smart Impedance:\u003c\/strong\u003e Switch between 2 ohms and 4 ohms to match your amplifier's optimal output impedance — no rewiring required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Aluminum Cone:\u003c\/strong\u003e Higher stiffness-to-mass ratio than polypropylene — accurate bass reproduction at shallow excursion depths with ultra-low distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Rubber Surround:\u003c\/strong\u003e Maximizes available cone excursion within the shallow motor structure for the deepest possible bass from a low-profile design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Basket:\u003c\/strong\u003e Moving-air cooling keeps the 50mm voice coil thermally managed during high-output operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W RMS \/ 1,200W Peak Power Handling:\u003c\/strong\u003e Club Series 12\" power handling in a shallow-mount package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30Hz – 500Hz Frequency Response:\u003c\/strong\u003e Deep bass extension from a shallow-mount design — down to 30Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverted Dust Cap + Hidden Fastener Trim Ring:\u003c\/strong\u003e Signature Club Series styling with a clean, custom look — no exposed hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Enclosure Recommendations\u003c\/h2\u003e\n\u003cp\u003ePair the Club 122SL with a mono amplifier rated 300–400W RMS at your chosen impedance. The JBL Club A600 (350W at 4Ω \/ 600W at 2Ω) is a natural match — keep gain conservative at 2 ohms to stay within the sub's 400W RMS rating. For enclosures: a sealed shallow-mount enclosure is the most common choice for behind-seat and shallow trunk installs — it delivers tight, accurate bass and works well within the Club 122SL's shallow motor structure. A purpose-built shallow ported enclosure can extend low-frequency output further if space allows. Set your amplifier's low-pass crossover at 80Hz and subsonic filter at 28Hz. Use 8 AWG or heavier speaker wire from amp to sub.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub 122SL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e12\" (300mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e400W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e1,200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (1W\/1m)\u003c\/td\u003e\n\u003ctd\u003e85dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e30Hz – 500Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e2 or 4 ohms (SSI™ Selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice Coil Diameter\u003c\/td\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone Material\u003c\/td\u003e\n\u003ctd\u003eRigid Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround Material\u003c\/td\u003e\n\u003ctd\u003eHigh-Roll Rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasket\u003c\/td\u003e\n\u003ctd\u003eVented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout Diameter\u003c\/td\u003e\n\u003ctd\u003e27.9 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Depth\u003c\/td\u003e\n\u003ctd\u003e83mm (3.27\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Club 122SL compare to the Club 102SL?\u003c\/strong\u003e\u003cbr\u003eA: Both are shallow-mount SSI™ subwoofers with aluminum cones and vented baskets. The Club 102SL is a 10\" sub at 350W RMS with an 82.5mm mounting depth. The Club 122SL steps up to 12\" and 400W RMS for more cone area and deeper bass extension (30Hz vs 35Hz) at a slightly deeper 83mm mounting depth. Choose the 102SL for the tightest spaces; choose the 122SL for more output when you have a few extra millimeters of depth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Club 122SL compare to the standard Club 122?\u003c\/strong\u003e\u003cbr\u003eA: The standard Club 122 uses a polypropylene cone with a double-stacked magnet and standard mounting depth for maximum excursion and output. The Club 122SL uses a rigid aluminum cone with a shallow motor structure (83mm depth) for space-constrained installs. Both share SSI™ selectable impedance and 400W RMS power handling. Choose the 122SL for tight spaces; choose the Club 122 for maximum output in a standard enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier pairs best with the Club 122SL?\u003c\/strong\u003e\u003cbr\u003eA: A mono amplifier rated 300–400W RMS at your chosen impedance is ideal. The JBL Club A600 is a natural match. Contact us at Trinity Car Audio for a specific recommendation based on your install location and system goals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What enclosure type works best with the Club 122SL?\u003c\/strong\u003e\u003cbr\u003eA: A sealed shallow-mount enclosure is the most practical choice for behind-seat and shallow trunk installs. A purpose-built shallow ported enclosure can extend low-frequency output further if space allows. Contact us at Trinity Car Audio for specific enclosure recommendations for your vehicle and install location.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698235605059,"sku":"JBLSUBCB122SL","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_CLUB_122SL_FRONT_48691_x1_24208eff-211a-4d60-ace8-9b543845aa3f.png?v=1787255708"},{"product_id":"jbl-stadium-962m","title":"JBL Stadium 962M 6x9\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stadium 962M 6x9\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 120W RMS \/ 360W peak power at a 3.0-ohm nominal impedance, bringing Stadium Series flagship engineering to the 6x9\" coaxial format. Glass-fiber Plus One™ woofer, high-resolution textile dome tweeter extending to 40kHz, and a push-button tweeter level control — Stadium Series performance in a drop-in 6x9\" package with 94dB sensitivity and deep bass extension down to 35Hz.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ glass-fiber cone architecture\u003c\/strong\u003e — glass-fiber reinforcement adds rigidity and reduces unwanted flex compared to polypropylene, delivering tighter, more accurate bass reproduction with deeper extension down to 35Hz. The Plus One™ design increases effective cone area beyond a standard 6x9\" driver for more bass output and musical body. Sensitivity reaches 94dB at 2.83V — one of the highest sensitivity ratings in the Stadium Series lineup, delivering exceptional output efficiency from both factory head units and aftermarket amplifiers. The integrated \u003cstrong\u003e3\/4\" edge-driven textile dome tweeter\u003c\/strong\u003e extends all the way to 40kHz, resolving ultra-fine detail in hi-res audio files that standard tweeters simply can't reproduce. A \u003cstrong\u003eselectable 0dB \/ -3dB tweeter level control\u003c\/strong\u003e lets you tune the high-frequency balance to your vehicle's acoustics. The slim crossover design integrates cleanly into the speaker assembly. Frequency response spans 35Hz to 40kHz for extraordinary full-range coverage.\u003c\/p\u003e\n\n\u003cp\u003ePair with a 4-channel amplifier rated 75–130W RMS per channel, stable at 2–4 ohms. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker — choose an amp with adequate headroom. Mount in the factory 6x9\" rear deck or door location. A DSP processor with time alignment will further enhance the imaging and staging these speakers are capable of. Ideal for hi-res audio listeners and enthusiasts who want Stadium Series performance in a plug-and-play 6x9\" coaxial format.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stadium 962M?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Glass-Fiber Cone:\u003c\/strong\u003e Rigid glass-fiber construction delivers tighter bass and more accurate midrange than polypropylene — deeper extension down to 35Hz in a 6x9\" coaxial.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTextile Dome Tweeter to 40kHz:\u003c\/strong\u003e Resolves ultra-fine detail from hi-res audio sources — extended high-frequency response well beyond standard speaker range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94dB Sensitivity:\u003c\/strong\u003e Exceptional efficiency — one of the highest sensitivity ratings in the Stadium Series, delivering more output per watt from any source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W RMS \/ 360W Peak Power Handling:\u003c\/strong\u003e Built for high-powered amplifier setups without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level (0dB \/ -3dB):\u003c\/strong\u003e One-click high-frequency tuning to match your vehicle's acoustic character.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35Hz – 40kHz Frequency Response:\u003c\/strong\u003e Extraordinary bandwidth — from deep bass extension to ultra-high-frequency detail well beyond standard speaker range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim Crossover Design:\u003c\/strong\u003e Integrates cleanly into the speaker assembly for a tidy install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-In 6x9\" Coaxial Format:\u003c\/strong\u003e Stadium Series performance in a plug-and-play package — no component install complexity required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003ePair the Stadium 962M with a 4-channel amplifier rated 75–130W RMS per channel, stable at 2–4 ohms. The 3.0-ohm impedance draws more current than a 4-ohm speaker — choose an amp with headroom. Mount in the factory 6x9\" rear deck or door location. Use 14-gauge or heavier speaker wire for runs over 6 feet. A DSP processor with time alignment will further enhance the imaging and staging these speakers are capable of.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTADIUM 962M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e6x9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e120W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e360W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e94dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e35Hz – 40kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass Fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003e3\/4\" Edge-Driven Textile Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Level Control\u003c\/td\u003e\n\u003ctd\u003e0dB \/ -3dB Selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e3.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Stadium 962M and the Stadium 968MF?\u003c\/strong\u003e\u003cbr\u003eA: The Stadium 962M is a Stadium Series flagship coaxial with a glass-fiber Plus One™ cone and textile dome tweeter to 40kHz at 120W RMS and 94dB sensitivity. The Stage3 968MF is a Stage3 Series 3-way coaxial at 80W RMS and 92dB sensitivity. The Stadium 962M is the higher-tier option with more power handling, higher sensitivity, and extended high-frequency response.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Stadium 962M?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 75–130W RMS per channel, stable at 2–4 ohms, is ideal. The 3.0-ohm impedance draws more current than a 4-ohm speaker — choose an amp with headroom. A DSP processor will further enhance imaging and staging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stadium 962M off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: You can, and the 94dB sensitivity will give you excellent output. However, to fully unlock the 120W RMS capability and the dynamic range these speakers are capable of, an external amplifier is strongly recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Stadium 962M fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: The 962M is designed for standard 6x9\" OEM locations (rear deck or doors). Contact us at Trinity Car Audio with your vehicle's year, make, and model to confirm fitment before ordering.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698235637827,"sku":"JBLSPKSD962MAM","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_STADIUM_962M_HERO_TRANSPARENT_fd47b8d7-29f2-4bfc-8a8f-b68fa8b9bb7a.png?v=1787255693"},{"product_id":"jbl-club-44f","title":"JBL Club 44F 4\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club 44F 4\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 35W RMS \/ 105W peak power at a 3.0-ohm nominal impedance, bringing JBL's Club Series Plus One™ cone architecture and silk dome tweeter refinement to the compact 4\" format. A meaningful upgrade over factory sound in a drop-in coaxial package — more bass, cleaner highs, and a 90dB sensitivity that performs well off both factory head units and aftermarket amplifiers.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e, which increases effective cone area beyond a standard 4\" driver for deeper bass extension and more musical body without upsizing. The cone is molded from \u003cstrong\u003eacoustically damped, UV-resistant polypropylene\u003c\/strong\u003e, engineered to handle the heat cycles, humidity, and UV exposure of real-world in-car environments without warping or degrading over time. Sensitivity reaches 90dB at 2.83V, giving you strong, efficient output whether you're running a factory head unit or an aftermarket amplifier. The integrated \u003cstrong\u003eedge-driven silk dome tweeter\u003c\/strong\u003e handles the high-frequency spectrum with smooth, fatigue-free refinement — no harshness, even at high volumes. Frequency response spans 75Hz to 20kHz. The 3.0-ohm impedance is compatible with both factory and aftermarket sources. Larger magnets provide robust power handling for the 4\" format.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a true drop-in for most vehicles with factory 4\" locations. Pair with a 4-channel amplifier rated 25–50W RMS per channel for the best results, or run directly off a quality head unit — the 90dB sensitivity ensures solid output at everyday listening volumes. Ideal for dash, door, and rear deck locations where space is limited.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club 44F?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Cone Architecture:\u003c\/strong\u003e Increases effective cone area beyond a standard 4\" driver for deeper bass and more musical body — in a compact coaxial package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Acoustically damped and built to survive the heat, humidity, and UV exposure of real-world in-car environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90dB Sensitivity:\u003c\/strong\u003e High-efficiency design delivers strong output from both factory head units and aftermarket amplifiers — more volume per watt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Silk Dome Tweeter:\u003c\/strong\u003e Smooth, fatigue-free high-frequency reproduction — no harshness, even at high listening volumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35W RMS \/ 105W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75Hz – 20kHz Frequency Response:\u003c\/strong\u003e Clean musical bandwidth from midrange punch to crisp high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Drop-In Fit:\u003c\/strong\u003e Designed for standard 4\" OEM locations — no cutting or fabrication required in most vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0-Ohm Impedance:\u003c\/strong\u003e Compatible with factory head units and aftermarket amplifiers for maximum install flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Club 44F's 90dB sensitivity makes it a solid performer off a factory head unit. For the best performance, pair with a 4-channel amp rated 25–50W RMS per channel, stable at 2–4 ohms. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker — choose an amp rated stable at 2–4 ohms. Mount in the factory 4\" location — no cutting or fabrication required in most vehicles. Use 16-gauge or heavier speaker wire for runs over 6 feet. Note: at 75Hz low-frequency extension, these speakers work best paired with a subwoofer for full-range system coverage.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub 44F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e35W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e105W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e90dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e75Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003eUV-Resistant Polypropylene (Plus One™ Architecture)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003eEdge-Driven Silk Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Club 44F and the Club 54F?\u003c\/strong\u003e\u003cbr\u003eA: The Club 44F is a 4\" speaker for compact OEM dash, door, and rear deck locations. The Club 54F is a 5.25\" speaker for slightly larger OEM locations. Both share the same Plus One™ cone architecture, silk dome tweeter, and 3.0-ohm impedance. The Club 54F handles 45W RMS vs 35W RMS for the 44F and extends slightly lower (75Hz vs 75Hz — same). Choose based on your vehicle's OEM speaker size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Club 44F off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the 90dB sensitivity and 3.0-ohm impedance work well with factory head units. You'll hear a noticeable improvement over OEM speakers immediately. Adding an external amplifier will unlock the full 35W RMS potential.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need a subwoofer with the Club 44F?\u003c\/strong\u003e\u003cbr\u003eA: The 44F's 75Hz low-frequency extension means it won't reproduce deep bass on its own. For full-range system coverage, pairing with a subwoofer is strongly recommended. The Club 44F handles midrange and highs; a subwoofer handles everything below 75Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Club 44F fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: The Club 44F is designed for standard 4\" OEM locations. Contact us at Trinity Car Audio with your vehicle's year, make, and model to confirm fitment before ordering.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698235736131,"sku":"JBLSPKCB44F","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_CLUB_44F_HERO_43377_x1_06e4f78c-7aa3-4886-b87d-9d4594d853f6.png?v=1787255721"},{"product_id":"jbl-club-102sl","title":"JBL Club 102SL 10\" Shallow-Mount SSI Subwoofer","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club 102SL 10\" Shallow-Mount SSI Subwoofer\u003c\/strong\u003e delivers 350W RMS \/ 1,050W peak power with \u003cstrong\u003eSelectable Smart Impedance (SSI™) technology\u003c\/strong\u003e and an ultra-shallow \u003cstrong\u003e82.5mm (3.25\") mounting depth\u003c\/strong\u003e — making it the go-to solution for builds where a standard-depth subwoofer simply won't fit. Trucks, SUVs, sedans with limited trunk depth, and under-seat installs — the Club 102SL brings Club Series bass output to locations that were previously off-limits.\u003c\/p\u003e\n\n\u003cp\u003eThe SSI™ system lets you switch between \u003cstrong\u003e2 ohms\u003c\/strong\u003e for maximum power output from a high-current amplifier, or \u003cstrong\u003e4 ohms\u003c\/strong\u003e for cleaner, more efficient operation — no rewiring, no separate DVC configurations. The \u003cstrong\u003erigid aluminum cone\u003c\/strong\u003e is the key differentiator from the standard Club 102's polypropylene cone — aluminum's higher stiffness-to-mass ratio allows for accurate bass reproduction at the shallow excursion depths that a low-profile motor structure requires, while keeping distortion ultra-low even at full output. The \u003cstrong\u003ehigh-roll rubber surround\u003c\/strong\u003e maximizes available cone excursion within the shallow motor structure. The \u003cstrong\u003evented basket\u003c\/strong\u003e channels moving air across the 50mm voice coil to dissipate heat during high-output operation. Sensitivity is 82.5dB at 1W\/1m; frequency response spans 35Hz to 500Hz (-6dB). Cutout diameter is 228.6mm (22.86cm). The \u003cstrong\u003econcealed trim ring\u003c\/strong\u003e and signature orange accent deliver a clean, custom look. Weight: 4.5 kg.\u003c\/p\u003e\n\n\u003cp\u003ePair the Club 102SL with a mono amplifier rated 250–350W RMS at your chosen impedance. The JBL Club A600 at 350W RMS (4 ohms) or 600W RMS (2 ohms) is a natural match — keep gain conservative at 2 ohms. Use a sealed enclosure or a purpose-built shallow-mount enclosure for the best results — the 82.5mm mounting depth opens up under-seat, behind-seat, and spare-tire well locations that standard subwoofers can't access.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club 102SL?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e82.5mm Shallow Mounting Depth:\u003c\/strong\u003e Fits under seats, behind seats, in spare-tire wells, and in shallow trunk locations where standard subwoofers won't fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSI™ Selectable Smart Impedance:\u003c\/strong\u003e Switch between 2 ohms and 4 ohms to match your amplifier's optimal output impedance — no rewiring required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Aluminum Cone:\u003c\/strong\u003e Higher stiffness-to-mass ratio than polypropylene — accurate bass reproduction at shallow excursion depths with ultra-low distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Rubber Surround:\u003c\/strong\u003e Maximizes available cone excursion within the shallow motor structure for the deepest possible bass from a low-profile design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Basket:\u003c\/strong\u003e Moving-air cooling keeps the 50mm voice coil thermally managed during high-output operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS \/ 1,050W Peak Power Handling:\u003c\/strong\u003e Club Series power handling in a shallow-mount package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35Hz – 500Hz Frequency Response:\u003c\/strong\u003e Deep bass extension from a shallow-mount design — down to 35Hz (-6dB).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcealed Trim Ring + Orange Accent:\u003c\/strong\u003e Clean, custom look with signature Club Series styling — no exposed hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Enclosure Recommendations\u003c\/h2\u003e\n\u003cp\u003ePair the Club 102SL with a mono amplifier rated 250–350W RMS at your chosen impedance. The JBL Club A600 (350W at 4Ω \/ 600W at 2Ω) is a natural match — keep gain conservative at 2 ohms to stay within the sub's 350W RMS rating. For enclosures: a sealed shallow-mount enclosure is the most common choice for under-seat and spare-tire well installs — it delivers tight, accurate bass and works well within the Club 102SL's shallow motor structure. A purpose-built ported shallow enclosure can extend low-frequency output further if space allows. Set your amplifier's low-pass crossover at 80Hz and subsonic filter at 30Hz. Use 8 AWG or heavier speaker wire from amp to sub.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub 102SL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e10\" (250mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e350W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e1,050W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (1W\/1m)\u003c\/td\u003e\n\u003ctd\u003e82.5dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response (-6dB)\u003c\/td\u003e\n\u003ctd\u003e35Hz – 500Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e2 or 4 ohms (SSI™ Selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice Coil Diameter\u003c\/td\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone Material\u003c\/td\u003e\n\u003ctd\u003eRigid Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround Material\u003c\/td\u003e\n\u003ctd\u003eHigh-Roll Rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasket\u003c\/td\u003e\n\u003ctd\u003eVented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout Diameter\u003c\/td\u003e\n\u003ctd\u003e228.6mm (22.86cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Depth\u003c\/td\u003e\n\u003ctd\u003e82.5mm (3.25\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How shallow is the Club 102SL's mounting depth?\u003c\/strong\u003e\u003cbr\u003eA: The Club 102SL has an 82.5mm (3.25\") mounting depth — making it compatible with under-seat enclosures, spare-tire well locations, and shallow trunk builds where standard subwoofers (typically 150–200mm deep) won't fit. Always measure your available depth before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Club 102SL compare to the standard Club 102?\u003c\/strong\u003e\u003cbr\u003eA: Both share SSI™ selectable impedance and 350W RMS power handling. The Club 102SL uses a rigid aluminum cone and shallow motor structure (82.5mm depth) for space-constrained installs. The standard Club 102 uses a polypropylene cone with a double-stacked magnet and standard mounting depth for maximum excursion and output. Choose the 102SL for tight spaces; choose the Club 102 for maximum output in a standard enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier pairs best with the Club 102SL?\u003c\/strong\u003e\u003cbr\u003eA: A mono amplifier rated 250–350W RMS at your chosen impedance is ideal. The JBL Club A600 is a natural match. Contact us at Trinity Car Audio for a specific recommendation based on your install location and system goals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What enclosure type works best with the Club 102SL?\u003c\/strong\u003e\u003cbr\u003eA: A sealed shallow-mount enclosure is the most common and practical choice for under-seat and spare-tire well installs. It delivers tight, accurate bass within the Club 102SL's shallow motor structure. Contact us at Trinity Car Audio for specific enclosure recommendations for your vehicle and install location.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698235768899,"sku":"JBLSUBCB102SL","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_CLUB_102SL_FRONT_48751_x1_474b7d5d-438a-4e06-af18-740fb975d1a2.png?v=1787255726"},{"product_id":"jbl-stage3-48f-4-coaxial-car-speakers","title":"JBL Stage3 48F 4\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage3 48F 4\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 50W RMS \/ 400W peak power at a True 4-ohm nominal impedance, bringing Stage3 Series glass-fiber engineering to the compact 4\" format. A drop-in upgrade for dash, door, and rear deck locations where space is tight — more bass, cleaner highs, and a True 4-ohm design that works equally well off a head unit or an amp.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e with a \u003cstrong\u003e10% glass-fiber reinforced cone\u003c\/strong\u003e — the added rigidity reduces unwanted flex for tighter, more accurate bass reproduction with frequency response reaching down to 80Hz. The Plus One™ design increases effective cone area beyond a standard 4\" driver for more bass output and musical body without upsizing. Sensitivity reaches 89dB at 2.83V, and the \u003cstrong\u003eTrue 4-ohm impedance\u003c\/strong\u003e is optimized to extract maximum clean power from both factory head units and aftermarket amplifiers. The integrated \u003cstrong\u003ePEI balanced dome tweeter\u003c\/strong\u003e delivers smooth, detailed high-frequency reproduction that spreads evenly throughout the cabin without harshness or fatigue. Frequency response spans 80Hz to 20kHz. Built with \u003cstrong\u003eeco-friendly recycled plastics and PVC-free wiring\u003c\/strong\u003e — premium sound with a reduced environmental footprint. The laser-etched carbon-fiber finish adds a premium visual touch.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a true drop-in for most vehicles with factory 4\" locations — common in dash, rear deck, and door applications across a wide range of vehicles. Pair with a 4-channel amplifier rated 30–60W RMS per channel for the best results, or run directly off a quality head unit. Ideal for everyday listening where you want noticeably better sound in a compact speaker format.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage3 48F?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Plus One™ Cone:\u003c\/strong\u003e 10% glass-fiber reinforcement delivers tighter bass and more accurate midrange than standard polypropylene — in a compact 4\" package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Impedance:\u003c\/strong\u003e Optimized for maximum clean power transfer from factory head units and aftermarket amplifiers — no impedance mismatch, no wasted watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Smooth, detailed high-frequency reproduction that spreads evenly throughout the cabin without harshness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e89dB Sensitivity:\u003c\/strong\u003e Efficient design delivers solid output from both head units and amplifiers — a meaningful upgrade even without an external amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS \/ 400W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80Hz – 20kHz Frequency Response:\u003c\/strong\u003e Clean musical bandwidth from midrange punch to crisp high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Drop-In Fit:\u003c\/strong\u003e Designed for standard 4\" OEM locations — no cutting or fabrication required in most vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-Friendly Construction:\u003c\/strong\u003e Recycled plastics and PVC-free wiring — premium performance with a lighter environmental footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Stage3 48F's True 4-ohm impedance and 89dB sensitivity make it a strong performer off a factory head unit. For the best performance, pair with a 4-channel amp rated 30–60W RMS per channel at 4 ohms. Mount in the factory 4\" location — no cutting or fabrication required in most vehicles. Use 16-gauge or heavier speaker wire for runs over 6 feet. Note: at 80Hz low-frequency extension, these speakers work best paired with a subwoofer for full-range system coverage.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE3 48F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e4\" (100mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e50W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e400W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e89dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e80Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (True 4-Ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass-Fiber Reinforced (10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003ePEI Balanced Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eRecycled Plastics, PVC-Free Wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What vehicles commonly use 4\" speakers?\u003c\/strong\u003e\u003cbr\u003eA: 4\" speakers are common in dash locations, rear decks, and door panels across a wide range of vehicles including many Honda, Toyota, Mazda, and European models. Contact us at Trinity Car Audio with your year, make, and model to confirm fitment before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stage3 48F off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the True 4-ohm impedance and 89dB sensitivity are designed to work well with factory head units. You'll hear a clear improvement over OEM speakers immediately. An external amplifier will unlock the full 50W RMS potential for even better dynamics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need a subwoofer with the Stage3 48F?\u003c\/strong\u003e\u003cbr\u003eA: The 48F's 80Hz low-frequency extension means it won't reproduce deep bass on its own. For full-range system coverage, pairing with a subwoofer is strongly recommended. The Stage3 48F handles midrange and highs; a subwoofer handles everything below 80Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Stage3 48F compare to the Stage3 58F?\u003c\/strong\u003e\u003cbr\u003eA: The 48F is a 4\" speaker for compact OEM locations; the 58F is a 5.25\" speaker for slightly larger locations. Both share the same Plus One™ glass-fiber cone, PEI dome tweeter, True 4-ohm design, and power handling. The 58F extends slightly lower (55Hz vs 80Hz) due to its larger cone area. Choose based on your vehicle's OEM speaker size.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698235834435,"sku":"JBLSPKS348F","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_3_CAR_AUDIO_48F_HERO_0052_x1_3fa9ac77-cd9a-485f-9f3d-e166f07c7a29.png?v=1787255744"},{"product_id":"jbl-stage-122d","title":"JBL Stage 122D 12\" Dual Voice Coil Car Subwoofer","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage 122D 12\" Dual Voice Coil Car Subwoofer\u003c\/strong\u003e delivers 250W RMS \/ 1,000W peak power with a \u003cstrong\u003edual voice coil (DVC)\u003c\/strong\u003e design that gives you flexible 2-ohm or 8-ohm wiring configurations to match your amplifier's optimal output impedance. The step-up from the Stage 122, the 122D adds DVC wiring flexibility while maintaining the same individually voiced JBL signature bass character, polypropylene cone, and hi-roll rubber surround.\u003c\/p\u003e\n\n\u003cp\u003eThe Stage 122D is built around a \u003cstrong\u003epolypropylene cone\u003c\/strong\u003e — lightweight and rigid for accurate, low-distortion bass reproduction with frequency response reaching down to 34Hz. The \u003cstrong\u003ehi-roll rubber surround\u003c\/strong\u003e maximizes cone excursion for deep, punchy bass while maintaining long-term durability. The \u003cstrong\u003e2\" (50.8mm) dual voice coil\u003c\/strong\u003e handles the 250W RMS thermal load efficiently and provides wiring flexibility: wire the coils in \u003cstrong\u003eparallel for 2 ohms\u003c\/strong\u003e to maximize power output from a high-current amplifier, or in \u003cstrong\u003eseries for 8 ohms\u003c\/strong\u003e for cleaner, more efficient operation with amplifiers that perform best at higher impedance loads. Sensitivity reaches 91dB at 2.83V for strong output efficiency. Frequency response spans 34Hz to 200Hz. Each Stage 122D is \u003cstrong\u003eindividually voiced by JBL transducer experts\u003c\/strong\u003e to ensure consistent sonic character across the lineup.\u003c\/p\u003e\n\n\u003cp\u003ePair the Stage 122D with a mono amplifier rated 150–250W RMS at your chosen impedance. Wire the coils in parallel for 2 ohms to maximize power output, or in series for 8 ohms for cleaner operation. Use a ported enclosure tuned to 35–40Hz for maximum output, or a sealed enclosure for tighter, more accurate bass. The DVC design also allows bridging two amplifier channels across the coils for unique system configurations — contact us at Trinity Car Audio for wiring guidance.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage 122D?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Voice Coil (DVC) Design:\u003c\/strong\u003e Wire in parallel for 2 ohms (maximum power) or in series for 8 ohms (cleaner operation) — flexible impedance matching for virtually any amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividually Voiced by JBL Transducer Experts:\u003c\/strong\u003e Each unit is tuned to deliver consistent JBL signature bass character — not just spec-matched, but sonically validated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Lightweight and rigid for accurate, low-distortion bass reproduction down to 34Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Roll Rubber Surround:\u003c\/strong\u003e Maximizes cone excursion for deep, punchy bass while maintaining long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91dB Sensitivity:\u003c\/strong\u003e Efficient design delivers strong bass output without taxing your amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS \/ 1,000W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e34Hz – 200Hz Frequency Response:\u003c\/strong\u003e Deep sub-bass extension to upper bass punch — full subwoofer bandwidth coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep-Up from Stage 122:\u003c\/strong\u003e All the Stage 122 sonic character with the added flexibility of DVC wiring — more amplifier compatibility options.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Enclosure Recommendations\u003c\/h2\u003e\n\u003cp\u003ePair the Stage 122D with a mono amplifier rated 150–250W RMS at your chosen impedance. Wire the coils in parallel for 2 ohms to maximize power output, or in series for 8 ohms for cleaner operation with amplifiers that perform best at higher impedance. For enclosures: a ported box tuned to 35–40Hz maximizes output for hip-hop, EDM, and bass-heavy music. A sealed enclosure delivers tighter, more accurate bass for rock, jazz, and everyday listening. Set your amplifier's low-pass crossover at 80Hz and subsonic filter at 30Hz for ported enclosures. Use 8 AWG or heavier speaker wire from amp to sub, and 4-gauge power and ground wire to your amplifier.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eStage 122D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e12\" (300mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e250W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e1,000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e91dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e34Hz – 200Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice Coil\u003c\/td\u003e\n\u003ctd\u003eDual Voice Coil (DVC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance (Parallel)\u003c\/td\u003e\n\u003ctd\u003e2 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance (Series)\u003c\/td\u003e\n\u003ctd\u003e8 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice Coil Diameter\u003c\/td\u003e\n\u003ctd\u003e2\" (50.8mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone Material\u003c\/td\u003e\n\u003ctd\u003ePolypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround Material\u003c\/td\u003e\n\u003ctd\u003eHi-Roll Rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Stage 122 and the Stage 122D?\u003c\/strong\u003e\u003cbr\u003eA: The Stage 122 is a single voice coil (SVC) at 4 ohms — simple, straightforward wiring. The Stage 122D is a dual voice coil (DVC) that wires to 2 ohms (parallel) or 8 ohms (series), giving you more amplifier compatibility options. Both share the same cone, surround, power handling, and JBL-voiced sonic character. Choose the 122D if you need impedance flexibility or want to bridge two amp channels across the coils.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Should I wire the Stage 122D to 2 ohms or 8 ohms?\u003c\/strong\u003e\u003cbr\u003eA: Wire to 2 ohms (coils in parallel) to maximize power output from a high-current amplifier. Wire to 8 ohms (coils in series) for cleaner, more efficient operation with amplifiers that perform best at higher impedance loads. Contact us at Trinity Car Audio and we'll recommend the right configuration for your specific amplifier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier pairs best with the Stage 122D?\u003c\/strong\u003e\u003cbr\u003eA: A mono amplifier rated 150–250W RMS at your chosen impedance is ideal. Contact us at Trinity Car Audio for a specific amp recommendation based on your system goals and wiring configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What enclosure type should I use with the Stage 122D?\u003c\/strong\u003e\u003cbr\u003eA: A ported enclosure tuned to 35–40Hz maximizes output for bass-heavy music. A sealed enclosure delivers tighter, more accurate bass for everyday listening. Contact us at Trinity Car Audio for specific enclosure volume and tuning recommendations for your vehicle.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Black","offer_id":43698236129347,"sku":"JBLSUBST122DAM","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_Stage_122_1605_WEB_Front.png?v=1787255580"},{"product_id":"jbl-club-54f-two-way-car-audio-speakers","title":"JBL Club 54F 5.25\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club 54F 5.25\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 45W RMS \/ 135W peak power at a 3.0-ohm nominal impedance, bringing JBL's Club Series Plus One™ cone architecture and silk dome tweeter refinement to the compact 5.25\" format. A meaningful upgrade over factory sound in a drop-in coaxial package — with foam gaskets included for a clean, rattle-free install.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e, which increases effective cone area beyond a standard 5.25\" driver for deeper bass extension and more musical body without upsizing. The cone is molded from \u003cstrong\u003eacoustically damped, UV-resistant polypropylene\u003c\/strong\u003e, engineered to handle the heat cycles, humidity, and UV exposure of real-world in-car environments without warping or degrading over time. Sensitivity reaches 91dB at 2.83V, giving you strong, efficient output whether you're running a factory head unit or an aftermarket amplifier. The integrated \u003cstrong\u003eedge-driven silk dome tweeter\u003c\/strong\u003e handles the high-frequency spectrum with smooth, fatigue-free refinement — no harshness, even at high volumes. Frequency response spans 75Hz to 20kHz. The 3.0-ohm impedance is compatible with both factory and aftermarket sources. Each set includes \u003cstrong\u003ecustom foam gaskets\u003c\/strong\u003e for an airtight, rattle-free seal against the door panel.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a true drop-in for most vehicles with factory 5.25\" locations. Pair with a 4-channel amplifier rated 30–60W RMS per channel for the best results, or run directly off a quality head unit — the 91dB sensitivity ensures solid output at everyday listening volumes. Ideal for everyday listening where you want noticeably better sound without a complex install.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club 54F?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Cone Architecture:\u003c\/strong\u003e Increases effective cone area beyond a standard 5.25\" driver for deeper bass and more musical body — in a compact coaxial package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Acoustically damped and built to survive the heat, humidity, and UV exposure of real-world in-car environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91dB Sensitivity:\u003c\/strong\u003e High-efficiency design delivers strong output from both factory head units and aftermarket amplifiers — more volume per watt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Silk Dome Tweeter:\u003c\/strong\u003e Smooth, fatigue-free high-frequency reproduction — no harshness, even at high listening volumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45W RMS \/ 135W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75Hz – 20kHz Frequency Response:\u003c\/strong\u003e Clean musical bandwidth from midrange punch to crisp high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam Gaskets Included:\u003c\/strong\u003e Custom foam gaskets provide an airtight, rattle-free seal against the door panel for a professional install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0-Ohm Impedance:\u003c\/strong\u003e Compatible with factory head units and aftermarket amplifiers for maximum install flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Club 54F's 91dB sensitivity makes it a solid performer off a factory head unit. For the best performance, pair with a 4-channel amp rated 30–60W RMS per channel, stable at 2–4 ohms. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker — choose an amp rated stable at 2–4 ohms. Mount in the factory 5.25\" location using the included foam gaskets for a clean, rattle-free install. Use 16-gauge or heavier speaker wire for runs over 6 feet.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub 54F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e5.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e45W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e135W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e91dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e75Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003eUV-Resistant Polypropylene (Plus One™ Architecture)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003eEdge-Driven Silk Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eCustom Foam Gaskets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Club 54F and the Club 64?\u003c\/strong\u003e\u003cbr\u003eA: The Club 54F is a 5.25\" speaker for vehicles with smaller OEM door or dash locations, while the Club 64 is a 6.5\" speaker for standard door locations. Both share the same Plus One™ cone architecture, silk dome tweeter, and 3.0-ohm impedance. Choose based on your vehicle's OEM speaker size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Club 54F off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the 91dB sensitivity and 3.0-ohm impedance work well with factory head units. You'll hear a noticeable improvement over OEM speakers immediately. Adding an external amplifier will unlock the full 45W RMS potential.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Club 54F?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 30–60W RMS per channel, stable at 2–4 ohms, is ideal. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker — choose an amp with a bit of headroom.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Club 54F fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: The Club 54F is designed for standard 5.25\" OEM locations. Contact us at Trinity Car Audio with your vehicle's year, make, and model to confirm fitment before ordering.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698236325955,"sku":"JBLSPKCB54F","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_CLUB_54F_HERO_0197_x1_e26d687f-c6a2-48f9-ba5d-3f501ecc2762.png?v=1787255783"},{"product_id":"jbl-stadium-102ssi-car-subwoofer","title":"JBL Stadium 102SSI 10\" SSI Car Subwoofer","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stadium 102SSI 10\" SSI Car Subwoofer\u003c\/strong\u003e delivers 450W RMS \/ 1,350W peak power with \u003cstrong\u003eSelectable Smart Impedance (SSI™) technology\u003c\/strong\u003e that lets you switch between 2 ohms and 4 ohms to match your amplifier's optimal output impedance. The 10\" sibling to the Stadium 122SSI, it brings the same aero-cooled voice coil, 8 AWG push terminals, and Stadium Series engineering to a more compact footprint — ideal for space-constrained builds where a 12\" won't fit but you still want Stadium-level output.\u003c\/p\u003e\n\n\u003cp\u003eThe SSI™ system is the headline feature: a built-in impedance selector lets you configure the sub at \u003cstrong\u003e2 ohms\u003c\/strong\u003e for maximum power output from a high-current amplifier, or \u003cstrong\u003e4 ohms\u003c\/strong\u003e for cleaner, more efficient operation. No rewiring, no separate DVC configurations — just flip and go. The \u003cstrong\u003eaero-cooled motor design\u003c\/strong\u003e channels airflow directly across the \u003cstrong\u003e2\" (50mm) voice coil\u003c\/strong\u003e to dissipate heat during high-output operation, keeping thermals low and performance consistent even during extended high-volume listening. Sensitivity reaches 91dB at 2.83V for strong output efficiency. Frequency response spans 30Hz to 175Hz, covering the full subwoofer range from deep sub-bass to upper bass punch. The \u003cstrong\u003eintegrated push terminals accept up to 8 AWG speaker wire\u003c\/strong\u003e for low-resistance current delivery at high power levels. Cutout diameter is 22.7cm with a 15.9cm mounting depth — fits most standard 10\" enclosures.\u003c\/p\u003e\n\n\u003cp\u003ePair the Stadium 102SSI with a mono amplifier rated 350–450W RMS at your chosen impedance. The JBL Club A600 at 350W RMS (4 ohms) or 600W RMS (2 ohms) is a natural match — keep gain conservative at 2 ohms. The JBL Stage GT 50011 at 300W RMS (4 ohms) or 500W RMS (2 ohms) is a tighter power match. Use a ported enclosure tuned to 32–38Hz for maximum output, or a sealed enclosure for tighter, more accurate bass.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stadium 102SSI?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSI™ Selectable Smart Impedance:\u003c\/strong\u003e Switch between 2 ohms and 4 ohms to match your amplifier's optimal output impedance — no rewiring, no separate DVC configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAero-Cooled Motor Design:\u003c\/strong\u003e Channels airflow directly across the voice coil for consistent thermal management during high-output operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e450W RMS \/ 1,350W Peak Power Handling:\u003c\/strong\u003e Stadium Series power handling in a compact 10\" package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91dB Sensitivity:\u003c\/strong\u003e Efficient design delivers strong bass output without taxing your amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30Hz – 175Hz Frequency Response:\u003c\/strong\u003e Deep sub-bass extension to upper bass punch — full subwoofer bandwidth coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 AWG Terminal Compatibility:\u003c\/strong\u003e Integrated push terminals accept up to 8 AWG wire for low-resistance, high-current delivery at rated power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 10\" Footprint:\u003c\/strong\u003e Stadium Series performance in a smaller package — ideal for builds where a 12\" won't fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Amplifier Compatibility:\u003c\/strong\u003e 2 or 4 ohm operation means it works with virtually any mono amplifier on the market.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Enclosure Recommendations\u003c\/h2\u003e\n\u003cp\u003ePair the Stadium 102SSI with a mono amplifier rated 350–450W RMS at your chosen impedance. The JBL Club A600 (350W at 4Ω \/ 600W at 2Ω) and Stage GT 50011 (300W at 4Ω \/ 500W at 2Ω) are both strong matches. For enclosures: a ported box tuned to 32–38Hz maximizes low-frequency extension and output for hip-hop, EDM, and bass-heavy music. A sealed enclosure delivers tighter, more accurate bass for rock, jazz, and SQL listening. Set your amplifier's low-pass crossover at 80Hz and subsonic filter at 28Hz for ported enclosures. Use 8 AWG or heavier speaker wire from amp to sub, and 4-gauge power and ground wire to your amplifier.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eStadium 102SSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e450W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e1,350W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e91dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e30Hz – 175Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e2 or 4 ohms (SSI™ Selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice Coil Diameter\u003c\/td\u003e\n\u003ctd\u003e2\" (50mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice Coil Cooling\u003c\/td\u003e\n\u003ctd\u003eAero-Cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal Compatibility\u003c\/td\u003e\n\u003ctd\u003eUp to 8 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout Diameter\u003c\/td\u003e\n\u003ctd\u003e22.7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Depth\u003c\/td\u003e\n\u003ctd\u003e15.9 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Stadium 102SSI compare to the Stadium 122SSI?\u003c\/strong\u003e\u003cbr\u003eA: Both share the same SSI™ selectable impedance technology and aero-cooled voice coil design. The 102SSI is a 10\" sub at 450W RMS — ideal for space-constrained builds. The 122SSI is a 12\" sub at 500W RMS for more cone area, deeper bass extension, and higher output. Choose the 102SSI when space is limited; choose the 122SSI when maximum output is the priority.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the SSI™ Selectable Smart Impedance work?\u003c\/strong\u003e\u003cbr\u003eA: A built-in impedance selector lets you configure the subwoofer at either 2 ohms or 4 ohms. Select 2 ohms to maximize power output from a high-current amplifier, or 4 ohms for cleaner, more efficient operation. No rewiring or separate DVC wiring configurations required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier pairs best with the Stadium 102SSI?\u003c\/strong\u003e\u003cbr\u003eA: A mono amplifier rated 350–450W RMS at your chosen impedance is ideal. The JBL Club A600 and Stage GT 50011 are both strong matches. Contact us at Trinity Car Audio for a specific recommendation based on your system goals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What enclosure type should I use with the Stadium 102SSI?\u003c\/strong\u003e\u003cbr\u003eA: A ported enclosure tuned to 32–38Hz maximizes output for bass-heavy music. A sealed enclosure delivers tighter, more accurate bass for everyday listening. Contact us at Trinity Car Audio for specific enclosure volume and tuning recommendations for your vehicle.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698236457027,"sku":"JBLSUBSD102SSIAM","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/D2_WEB_JBL_Stadium_102SSI_1605.png?v=1787263782"},{"product_id":"jbl-club-a754-4-channel-car-amplifier","title":"JBL Club A754 4-Channel Car Amplifier","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club A754 4-Channel Car Amplifier\u003c\/strong\u003e delivers 75W RMS x4 at 4 ohms, 100W RMS x4 at 2 ohms, or 200W RMS x2 bridged at 4 ohms — in a 32cm x 18cm x 5.1cm chassis. Variable high-pass and low-pass crossovers, speaker-level inputs, preamp outputs, and flexible 2\/3\/4-channel operation make this a versatile foundation for any speaker upgrade from a full 4-speaker system to a front stage plus subwoofer configuration.\u003c\/p\u003e\n\n\u003cp\u003eThe Club A754 steps up from the Stage GT 60041 with higher per-channel power output — \u003cstrong\u003e75W RMS x4 at 4 ohms\u003c\/strong\u003e for standard component or coaxial setups, \u003cstrong\u003e100W RMS x4 at 2 ohms\u003c\/strong\u003e for lower-impedance speakers like JBL's 3-ohm Club and Stadium Series drivers, and \u003cstrong\u003e200W RMS x2 bridged at 4 ohms\u003c\/strong\u003e for driving a subwoofer or a high-powered front stage. The \u003cstrong\u003evariable high-pass and low-pass crossover filters (32–320Hz, 12dB\/octave)\u003c\/strong\u003e handle speaker protection and subwoofer integration without a separate processor. Both \u003cstrong\u003epreamp (RCA) and speaker-level inputs\u003c\/strong\u003e are supported for seamless integration with factory head units or aftermarket sources. \u003cstrong\u003ePreamp outputs\u003c\/strong\u003e allow daisy-chaining to a separate subwoofer amplifier for a complete system build without signal loss. Fuse rating is 30A x2 (60A total); recommended wiring is 8-gauge power and ground. The 5.1cm profile keeps the chassis slim for under-seat or behind-panel mounting.\u003c\/p\u003e\n\n\u003cp\u003eThe Club A754 is the ideal amplifier for a full 4-speaker Club Series system — pair with Club 64C or Club 64CSQ component speakers up front and Club 64 coaxials in the rear. Bridge channels 3+4 to 200W RMS to drive a subwoofer alongside the front stage, or run all 4 channels for a pure speaker system and add a separate mono amp for the sub. Use the preamp outputs to feed a dedicated subwoofer amplifier for a clean, expandable system architecture.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club A754?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS x4 at 4 Ohms:\u003c\/strong\u003e More per-channel power than the Stage GT 60041 — drives JBL Club Series component speakers closer to their rated RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable to 200W RMS x2:\u003c\/strong\u003e Bridge channels 1+2 and\/or 3+4 for a high-powered front stage or subwoofer output alongside the remaining stereo channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers (32–320Hz, 12dB\/oct):\u003c\/strong\u003e Full system crossover control on all channels — no separate crossover or DSP required for basic system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Inputs:\u003c\/strong\u003e Connects directly to factory head unit speaker outputs — no line output converter required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreamp Outputs:\u003c\/strong\u003e Daisy-chain to a separate subwoofer amplifier for a complete, expandable system without signal loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2\/3\/4-Channel Flexibility:\u003c\/strong\u003e Run as a full 4-channel speaker amp, a 3-channel front stage plus sub, or a 2-channel bridged configuration — adapts to your system goals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim 5.1cm Profile:\u003c\/strong\u003e Fits under seats, behind panels, and in tight trunk locations without sacrificing power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJBL Club Series Engineering:\u003c\/strong\u003e Matched to Club Series speakers for consistent sonic character and optimal impedance loading.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWiring \u0026amp; System Recommendations\u003c\/h2\u003e\n\u003cp\u003eUse 8-gauge power and ground wire — fuse within 18 inches of the battery at 60A total (30A x2). For a full 4-speaker system: run channels 1+2 to front Club 64C or 64CSQ components (high-pass at 80Hz) and channels 3+4 to rear Club 64 coaxials (high-pass at 80Hz). To add a subwoofer, bridge channels 3+4 to 200W RMS for a sub load and run channels 1+2 for the front stage — or use the preamp outputs to feed a dedicated mono amp like the Club A600 or Club A1000. A DSP processor between the head unit and amp will add time alignment and active crossover control for a significant performance upgrade.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub A754\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (4Ω)\u003c\/td\u003e\n\u003ctd\u003e75W RMS x4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (2Ω)\u003c\/td\u003e\n\u003ctd\u003e100W RMS x4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridged Power (4Ω)\u003c\/td\u003e\n\u003ctd\u003e200W RMS x2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrossover\u003c\/td\u003e\n\u003ctd\u003eHP\/LP Variable, 32–320Hz, 12dB\/oct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003ePreamp (RCA) \u0026amp; Speaker-Level\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003ePreamp (RCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse Rating\u003c\/td\u003e\n\u003ctd\u003e30A x2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Wiring\u003c\/td\u003e\n\u003ctd\u003e8-Gauge Power \u0026amp; Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e32cm x 5.1cm x 18cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e3.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use the Club A754 with my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the speaker-level inputs connect directly to your factory head unit's speaker outputs without a line output converter. The preamp outputs also let you daisy-chain to a separate subwoofer amplifier for a complete system build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Club A754 compare to the Stage GT 60041?\u003c\/strong\u003e\u003cbr\u003eA: The Club A754 delivers 75W RMS x4 at 4 ohms vs. 65W RMS x4 for the Stage GT 60041 — more per-channel power for driving Club Series speakers closer to their rated RMS. The Club A754 also adds preamp outputs for daisy-chaining a sub amp. The Stage GT 60041 includes a bass EQ; the Club A754 does not. Choose the Club A754 for more speaker power and system expandability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I bridge the Club A754 to run a subwoofer?\u003c\/strong\u003e\u003cbr\u003eA: Yes — bridge channels 3+4 for 200W RMS at 4 ohms to drive a subwoofer, and use channels 1+2 in stereo for the front stage. Alternatively, use the preamp outputs to feed a dedicated mono amp like the Club A600 or Club A1000 for more subwoofer power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What speakers pair best with the Club A754?\u003c\/strong\u003e\u003cbr\u003eA: JBL Club Series speakers are the natural match. At 100W RMS x4 into 2 ohms, you're delivering close to the rated power of most JBL Club Series component systems. The 3-ohm Club and Stadium Series speakers will draw slightly more current — the Club A754's 2-ohm stable output handles this cleanly.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698236555331,"sku":"AMPCBA754AM","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_Club_a754_1605x1605_Hero.png?v=1787255797"},{"product_id":"jbl-stage3-68-6-1-2-coaxial-car-speaker","title":"JBL Stage3 68 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage3 68 6.5\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 70W RMS \/ 560W peak power at a True 4-ohm nominal impedance, bringing Stage3 Series glass-fiber engineering to the most popular OEM speaker size on the road. A drop-in upgrade for virtually any vehicle with a standard 6.5\" door location — more bass, cleaner highs, and a True 4-ohm design that works equally well off a head unit or an amp.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e with a \u003cstrong\u003e10% glass-fiber reinforced cone\u003c\/strong\u003e — the added rigidity reduces unwanted flex for tighter, more accurate bass reproduction with deeper extension down to 55Hz. The Plus One™ design increases effective cone area beyond a standard 6.5\" driver for more bass output and musical body without upsizing. Sensitivity reaches 91dB at 2.83V, and the \u003cstrong\u003eTrue 4-ohm impedance\u003c\/strong\u003e is optimized to extract maximum clean power from both factory head units and aftermarket amplifiers. The integrated \u003cstrong\u003ePEI balanced dome tweeter\u003c\/strong\u003e delivers smooth, detailed high-frequency reproduction that spreads evenly throughout the cabin without harshness or fatigue. Frequency response spans 55Hz to 20kHz for full musical coverage. Built with \u003cstrong\u003epost-consumer recycled plastics and PVC-free wiring\u003c\/strong\u003e — premium sound with a reduced environmental footprint.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a true drop-in for most vehicles with factory 6.5\" door locations. Pair with a 4-channel amplifier rated 40–80W RMS per channel for the best results, or run directly off a quality head unit — the True 4-ohm design and 91dB sensitivity make these a strong performer in head-unit-only setups. Ideal for everyday listening across all genres where you want noticeably better sound without a complex install.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage3 68?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Plus One™ Cone:\u003c\/strong\u003e 10% glass-fiber reinforcement delivers tighter bass and more accurate midrange than standard polypropylene — in the most popular 6.5\" coaxial format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Impedance:\u003c\/strong\u003e Optimized for maximum clean power transfer from factory head units and aftermarket amplifiers — no impedance mismatch, no wasted watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Smooth, detailed high-frequency reproduction that spreads evenly throughout the cabin without harshness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91dB Sensitivity:\u003c\/strong\u003e Efficient design delivers solid output from both head units and amplifiers — a meaningful upgrade even without an external amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS \/ 560W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55Hz – 20kHz Frequency Response:\u003c\/strong\u003e Full musical bandwidth from punchy bass to crisp high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Drop-In Fit:\u003c\/strong\u003e Designed for standard 6.5\" OEM door locations — no cutting or fabrication required in most vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-Friendly Construction:\u003c\/strong\u003e Post-consumer recycled plastics and PVC-free wiring — premium performance with a lighter environmental footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Stage3 68's True 4-ohm impedance and 91dB sensitivity make it a strong performer off a factory head unit — you'll hear a clear improvement over OEM speakers right out of the box. For the best performance, pair with a 4-channel amp rated 40–80W RMS per channel at 4 ohms. Mount in the factory 6.5\" door location — no cutting or fabrication required in most vehicles. Use 16-gauge or heavier speaker wire for runs over 6 feet to minimize resistance losses.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE3 68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e6.5\" (165mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e70W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e560W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e91dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e55Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (True 4-Ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass-Fiber Reinforced (10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003ePEI Balanced Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePost-Consumer Recycled Plastics, PVC-Free Wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e2.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Stage3 68 and the Stage3 68MF?\u003c\/strong\u003e\u003cbr\u003eA: The Stage3 68 is a 2-way coaxial — woofer and tweeter only. The Stage3 68MF is a 3-way coaxial with a dedicated midrange driver for improved vocal presence and midrange detail. Both share the same Plus One™ glass-fiber cone, True 4-ohm design, and power handling. Choose the 68 for a clean, simple upgrade; choose the 68MF if vocal clarity and midrange detail are a priority.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stage3 68 off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the True 4-ohm impedance and 91dB sensitivity are designed to work well with factory head units. You'll hear a clear improvement over OEM speakers immediately. An external amplifier will unlock the full 70W RMS potential for even better dynamics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Stage3 68?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 40–80W RMS per channel at 4 ohms is ideal. The True 4-ohm design ensures clean, efficient power transfer without impedance mismatch issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Stage3 68 fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: The Stage3 68 is designed for standard 6.5\" OEM door locations — one of the most common speaker sizes across virtually all vehicle makes and models. Contact us at Trinity Car Audio with your year, make, and model to confirm fitment before ordering.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698236588099,"sku":"JBLSPKS368","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_3_CAR_AUDIO_68_HERO_0137_x1_4e868198-4f3d-4a5e-a25b-a399bdeea0c7.png?v=1787255814"},{"product_id":"jbl-club-a600","title":"JBL Club A600 600W Mono Class-D Subwoofer Amplifier","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club A600 600W Mono Class-D Subwoofer Amplifier\u003c\/strong\u003e delivers 350W RMS at 4 ohms and \u003cstrong\u003e600W RMS at 2 ohms\u003c\/strong\u003e — 1,200W peak — in an ultra-compact 22cm x 5.1cm x 18cm chassis. Class-D efficiency, variable low-pass crossover, variable bass boost, phase switch, speaker-level inputs, and a 5-meter wired remote bass control — everything you need to drive a subwoofer cleanly, in a package that fits virtually anywhere.\u003c\/p\u003e\n\n\u003cp\u003eThe Club A600 runs in \u003cstrong\u003eClass-D\u003c\/strong\u003e for maximum thermal efficiency — less heat, smaller chassis, lower current draw, and reliable long-term operation in under-seat or behind-panel installs. Power output is \u003cstrong\u003e350W RMS at 4 ohms\u003c\/strong\u003e and \u003cstrong\u003e600W RMS at 2 ohms\u003c\/strong\u003e, covering most 10\"–12\" subwoofers rated in that range. The \u003cstrong\u003evariable low-pass filter (32–320Hz, 12dB\/octave)\u003c\/strong\u003e handles subwoofer integration and speaker protection. The \u003cstrong\u003evariable bass boost (0–12dB at 45Hz)\u003c\/strong\u003e adds low-end punch without a separate processor. The \u003cstrong\u003e0°\/180° phase switch\u003c\/strong\u003e aligns your subwoofer's phase with your main speakers for maximum bass output and impact. Both \u003cstrong\u003epreamp (RCA) and speaker-level inputs\u003c\/strong\u003e are supported for seamless integration with factory head units or aftermarket sources. The included \u003cstrong\u003e5-meter wired remote bass control\u003c\/strong\u003e keeps subwoofer level adjustment at your fingertips from the driver's seat. Full on-board protection covers short circuit, overvoltage, undervoltage, overcurrent, and overtemperature. Recommended wiring is 8-gauge power and ground; fuse rating is 30A x2 (60A total).\u003c\/p\u003e\n\n\u003cp\u003eThe Club A600 sits between the Stage GT 50011 (500W at 2Ω) and the Club A1000 (1,000W at 2Ω) in the JBL amplifier lineup — the ideal choice for subwoofers rated 300–600W RMS. Pair with the JBL Club 122 (400W RMS) or Club 102 (350W RMS) for a perfectly matched Club Series system. The compact chassis makes it a top pick for under-seat installs, hatchbacks, and space-constrained builds.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club A600?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W RMS at 2 Ohms:\u003c\/strong\u003e Serious subwoofer power in an ultra-compact chassis — drives most 10\"–12\" subwoofers to their rated RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Efficiency:\u003c\/strong\u003e Maximum power output with minimum heat generation — compact chassis, lower current draw, reliable long-term operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter (32–320Hz, 12dB\/oct):\u003c\/strong\u003e Full subwoofer integration control — set your crossover point precisely without a separate processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost (0–12dB @ 45Hz):\u003c\/strong\u003e Dial in sub punch without a separate EQ — tunable from flat to +12dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0°\/180° Phase Switch:\u003c\/strong\u003e Align your subwoofer's phase with your main speakers for maximum bass output and impact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Inputs:\u003c\/strong\u003e Connects directly to factory head unit speaker outputs — no line output converter required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Meter Wired Remote Bass Control:\u003c\/strong\u003e Keep subwoofer level adjustment at your fingertips from the driver's seat — included in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Compact Chassis (22cm x 5.1cm x 18cm):\u003c\/strong\u003e Fits under seats, behind panels, and in the tightest trunk locations without sacrificing power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWiring \u0026amp; System Recommendations\u003c\/h2\u003e\n\u003cp\u003eUse 8-gauge power and ground wire — fuse within 18 inches of the battery at 60A total (30A x2). For maximum output, wire a DVC subwoofer to 2 ohms and run the amp at 600W RMS. Set the low-pass crossover at 80Hz and start the bass boost at 0dB — increase only if needed to avoid clipping. The Club A600 pairs naturally with the JBL Club 122 (400W RMS) or Club 102 (350W RMS) for a matched Club Series system. Use 8 AWG or heavier speaker wire from amp to subwoofer. For a complete system, pair with the JBL Club A5055 for the speaker channels and run the Club A600 dedicated to the subwoofer.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub A600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Class\u003c\/td\u003e\n\u003ctd\u003eClass-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003eMono (1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (4Ω)\u003c\/td\u003e\n\u003ctd\u003e350W RMS x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (2Ω)\u003c\/td\u003e\n\u003ctd\u003e600W RMS x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Power\u003c\/td\u003e\n\u003ctd\u003e1,200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-Pass Filter\u003c\/td\u003e\n\u003ctd\u003eVariable, 32–320Hz, 12dB\/oct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBass Boost\u003c\/td\u003e\n\u003ctd\u003e0–12dB @ 45Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhase Switch\u003c\/td\u003e\n\u003ctd\u003e0° \/ 180°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003ePreamp (RCA) \u0026amp; Speaker-Level\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse Rating\u003c\/td\u003e\n\u003ctd\u003e30A x2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Wiring\u003c\/td\u003e\n\u003ctd\u003e8-Gauge Power \u0026amp; Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Cable Length\u003c\/td\u003e\n\u003ctd\u003e5.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e22.0cm x 5.1cm x 18.0cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e2.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What subwoofer pairs best with the Club A600?\u003c\/strong\u003e\u003cbr\u003eA: The JBL Club 122 (400W RMS) and Club 102 (350W RMS) are natural matches. Wire a DVC sub to 2 ohms to take full advantage of the 600W RMS output. Contact us at Trinity Car Audio for a specific recommendation based on your system goals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use the Club A600 with my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the speaker-level inputs connect directly to your factory head unit's speaker outputs without a line output converter. This makes it one of the easiest mono amplifiers to integrate into an OEM system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Club A600 compare to the Club A1000 and Stage GT 50011?\u003c\/strong\u003e\u003cbr\u003eA: The Stage GT 50011 puts out 500W RMS at 2 ohms with a parametric bass EQ and variable phase control. The Club A600 puts out 600W RMS at 2 ohms in a more compact chassis with a simpler control set. The Club A1000 steps up to 1,000W RMS at 2 ohms for higher-powered subwoofers. Choose the Club A600 for the best balance of power and compactness in the Club Series lineup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What gauge power wire do I need for the Club A600?\u003c\/strong\u003e\u003cbr\u003eA: Use 8-gauge power and ground wire for runs up to 12 feet. Fuse within 18 inches of the battery at 60A total (30A x2 fuses).\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698236883011,"sku":"AMPCBA600AM","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_CLUB_A600_Hero_004_c422517d-692b-4d31-a392-4bfc4717666d.png?v=1787263376"},{"product_id":"jbl-dsp-amplifier-dsp4086","title":"JBL DSP4086 8-Channel Class-D DSP Amplifier","description":"\u003cp\u003eThe \u003cstrong\u003eJBL DSP4086 8-Channel Class-D DSP Amplifier\u003c\/strong\u003e puts out 40W RMS x8 at 4 ohms (60W RMS x8 at 2 ohms) — 1,000W peak — with a fully integrated digital signal processor featuring a 31-band EQ, time alignment, and active crossovers, all tunable via PC interface. This is the all-in-one solution for builders who want amplification and DSP processing in a single compact chassis — no separate DSP unit, no extra wiring, no additional mounting space required.\u003c\/p\u003e\n\n\u003cp\u003eThe DSP4086 accepts \u003cstrong\u003e6-channel audio inputs\u003c\/strong\u003e and delivers \u003cstrong\u003e8 powered output channels\u003c\/strong\u003e, making it ideal for complex system configurations: front stage (L\/R), rear fill (L\/R), center channel, subwoofer, and more. All 8 channels run in \u003cstrong\u003eClass-D\u003c\/strong\u003e for maximum thermal efficiency — less heat, smaller chassis, lower current draw. Power output is \u003cstrong\u003e40W RMS x8 at 4 ohms\u003c\/strong\u003e or \u003cstrong\u003e60W RMS x8 at 2 ohms\u003c\/strong\u003e, with THD+N below 1% at rated output. Frequency response spans 10Hz to 22kHz (√3dB) with a signal-to-noise ratio exceeding 90dB at 4 ohms — clean, quiet, high-fidelity amplification across all 8 channels simultaneously. The integrated DSP is tuned via an \u003cstrong\u003eintuitive PC interface\u003c\/strong\u003e offering a \u003cstrong\u003e31-band graphic or parametric EQ\u003c\/strong\u003e (selectable), \u003cstrong\u003eprecise time alignment\u003c\/strong\u003e for soundstage correction, and \u003cstrong\u003eactive crossover controls\u003c\/strong\u003e for full system frequency management without a separate processor. A \u003cstrong\u003ewired remote subwoofer level control (-30dB to +6dB)\u003c\/strong\u003e is included for driver-seat bass adjustment. The \u003cstrong\u003econformal-coated circuit board\u003c\/strong\u003e resists moisture, vibration, and harsh environments — making the DSP4086 suitable for motorcycle, marine, and powersports applications in addition to standard automotive installs. Operating voltage is 8V–16V; fuse rating is 40A.\u003c\/p\u003e\n\n\u003cp\u003eThe DSP4086 is the ideal amplifier for a full active system build — pair with JBL Stadium Series component speakers up front, rear fill speakers, and a subwoofer. Use the active crossover to set precise crossover points for each channel, and the time alignment to correct for driver-to-listener distances. The compact chassis mounts under a seat, behind a panel, or in a motorcycle fairing. A single 40A fuse keeps the install clean and simple.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL DSP4086?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier + DSP in One Chassis:\u003c\/strong\u003e 8 powered output channels with integrated 31-band EQ, time alignment, and active crossovers — no separate DSP unit required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31-Band EQ (Graphic or Parametric):\u003c\/strong\u003e Selectable EQ mode for precise frequency response correction across all channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime Alignment:\u003c\/strong\u003e Correct for driver-to-listener distance differences for a focused, centered soundstage — a feature previously reserved for standalone DSP processors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Crossovers:\u003c\/strong\u003e Set precise crossover points for each channel without passive crossover networks — maximum control, minimum signal loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 Inputs \/ 8 Outputs:\u003c\/strong\u003e Handles complex system configurations — front stage, rear fill, center, and subwoofer from a single unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Efficiency:\u003c\/strong\u003e Maximum power output with minimum heat generation — compact chassis, lower current draw, reliable long-term operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConformal-Coated PCB:\u003c\/strong\u003e Moisture and vibration resistant — suitable for automotive, motorcycle, marine, and powersports applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Subwoofer Level Control Included:\u003c\/strong\u003e -30dB to +6dB adjustment from the driver's seat — included in the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSystem \u0026amp; Wiring Recommendations\u003c\/h2\u003e\n\u003cp\u003eUse 8-gauge power and ground wire — fuse within 18 inches of the battery at 40A. For a full active system: assign channels 1+2 to front tweeters (high-pass at 3–4kHz), channels 3+4 to front woofers (band-pass at 80Hz–3kHz), channels 5+6 to rear fill (high-pass at 80Hz), and channels 7+8 to subwoofer (low-pass at 80Hz). Use the PC tuning interface to set time alignment for each driver position and apply EQ correction for your vehicle's acoustic response. The DSP4086 pairs naturally with JBL Stadium Series component speakers and any JBL Club or Stadium Series subwoofer. For motorcycle installs, the conformal-coated PCB and compact chassis make this one of the most capable amplifiers available for fairing or under-seat mounting.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDSP4086\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Class\u003c\/td\u003e\n\u003ctd\u003eClass-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Channels\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Channels\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (4Ω)\u003c\/td\u003e\n\u003ctd\u003e40W RMS x8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (2Ω)\u003c\/td\u003e\n\u003ctd\u003e60W RMS x8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Power\u003c\/td\u003e\n\u003ctd\u003e1,000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e10Hz – 22kHz (√3dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-Noise Ratio\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;90dB @ 4Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEQ\u003c\/td\u003e\n\u003ctd\u003e31-Band Graphic or Parametric (Selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTime Alignment\u003c\/td\u003e\n\u003ctd\u003eYes (PC Tunable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive Crossovers\u003c\/td\u003e\n\u003ctd\u003eYes (PC Tunable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSub Level Control\u003c\/td\u003e\n\u003ctd\u003e-30dB to +6dB (Wired Remote)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e8V – 16V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse Rating\u003c\/td\u003e\n\u003ctd\u003e40A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCB Coating\u003c\/td\u003e\n\u003ctd\u003eConformal (Moisture\/Vibration Resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need a separate DSP processor with the DSP4086?\u003c\/strong\u003e\u003cbr\u003eA: No — the DSP4086 has a fully integrated DSP with 31-band EQ, time alignment, and active crossovers built in. It replaces both a standalone amplifier and a separate DSP processor, saving space, wiring complexity, and cost.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What software do I use to tune the DSP4086?\u003c\/strong\u003e\u003cbr\u003eA: The DSP4086 is tuned via a PC interface (Windows). Connect via USB, launch the JBL DSP tuning software, and adjust EQ, time alignment, crossover points, and channel levels. Contact us at Trinity Car Audio for guidance on the tuning process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the DSP4086 suitable for motorcycle or marine installs?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the conformal-coated circuit board resists moisture, vibration, and harsh environments, making the DSP4086 one of the most capable amplifiers available for motorcycle fairing, under-seat, or marine dash mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run a subwoofer with the DSP4086?\u003c\/strong\u003e\u003cbr\u003eA: Yes — bridge two channels for subwoofer output, or dedicate one or two channels to a subwoofer with the active low-pass crossover set at your desired frequency. The included remote level control gives you -30dB to +6dB subwoofer adjustment from the driver's seat.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698236948547,"sku":"DSP4086AM","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_DSP4086_HERO__0008_x1_2ddef9a1-410f-48ec-a2d9-988d56826288.png?v=1787255813"},{"product_id":"jbl-club-122","title":"JBL Club 122 12\" SSI Car Subwoofer","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club 122 12\" SSI Car Subwoofer\u003c\/strong\u003e delivers 400W RMS \/ 1,200W peak power with \u003cstrong\u003eSelectable Smart Impedance (SSI™) technology\u003c\/strong\u003e that lets you switch between 2 ohms and 4 ohms to match your amplifier's optimal output impedance. Double-stacked magnet, high-roll rubber surround, vented basket, and JBL's signature inverted dust cap — this is the Club Series 12\" flagship, stepping up from the Club 102 with more cone area, more power handling, and deeper bass extension down to 30Hz.\u003c\/p\u003e\n\n\u003cp\u003eThe SSI™ system is the headline feature: a built-in impedance selector lets you configure the sub at \u003cstrong\u003e2 ohms\u003c\/strong\u003e for maximum power output from a high-current amplifier, or \u003cstrong\u003e4 ohms\u003c\/strong\u003e for cleaner, more efficient operation. No rewiring, no separate DVC configurations — just flip and go. The \u003cstrong\u003edouble-stacked magnet\u003c\/strong\u003e provides a powerful, consistent magnetic field for high linear excursion and deep bass extension down to 30Hz. The \u003cstrong\u003ehigh-roll rubber surround\u003c\/strong\u003e maximizes cone excursion for rich, earth-shaking low frequencies while maintaining long-term durability. The \u003cstrong\u003evented basket\u003c\/strong\u003e channels moving air across the 50mm voice coil to dissipate heat during high-output operation, keeping thermals low and performance consistent. The \u003cstrong\u003epolypropylene cone\u003c\/strong\u003e is lightweight and rigid for accurate bass reproduction. Sensitivity is 86dB at 1W\/1m; frequency response spans 30Hz to 500Hz. Cutout diameter is 28.3cm with a 13.9cm mounting depth. The signature \u003cstrong\u003einverted dust cap with hidden trim ring hardware\u003c\/strong\u003e delivers a clean, custom look.\u003c\/p\u003e\n\n\u003cp\u003ePair the Club 122 with a mono amplifier rated 300–400W RMS at your chosen impedance. The JBL Club A1000 at 600W RMS (4 ohms) or 1,000W RMS (2 ohms) provides ample headroom — keep gain conservative at 2 ohms. The JBL Stage GT 50011 at 300W RMS (4 ohms) or 500W RMS (2 ohms) is a tighter power match. Use a ported enclosure tuned to 32–38Hz for maximum output, or a sealed enclosure for tighter, more accurate bass.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club 122?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSI™ Selectable Smart Impedance:\u003c\/strong\u003e Switch between 2 ohms and 4 ohms to match your amplifier's optimal output impedance — no rewiring, no separate DVC configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Stacked Magnet:\u003c\/strong\u003e Powerful, consistent magnetic field for high linear excursion and deep bass extension down to 30Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Rubber Surround:\u003c\/strong\u003e Maximizes cone excursion for rich, deep bass while maintaining long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Basket:\u003c\/strong\u003e Moving-air cooling keeps the 50mm voice coil thermally managed during high-output operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W RMS \/ 1,200W Peak Power Handling:\u003c\/strong\u003e Serious headroom for high-powered mono amplifiers without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30Hz – 500Hz Frequency Response:\u003c\/strong\u003e Deep infrasonic extension down to 30Hz — you'll feel it as much as hear it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverted Dust Cap with Hidden Hardware:\u003c\/strong\u003e Signature Club Series styling with a clean, custom look — no exposed fasteners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Amplifier Compatibility:\u003c\/strong\u003e 2 or 4 ohm operation means it works with virtually any mono amplifier on the market.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Enclosure Recommendations\u003c\/h2\u003e\n\u003cp\u003ePair the Club 122 with a mono amplifier rated 300–400W RMS at your chosen impedance. The JBL Stage GT 50011 at 300W RMS (4 ohms) or 500W RMS (2 ohms) is a strong match. The JBL Club A1000 provides more headroom — keep gain conservative to stay within the sub's 400W RMS rating. For enclosures: a ported box tuned to 32–38Hz maximizes low-frequency extension and output for hip-hop, EDM, and bass-heavy music. A sealed enclosure delivers tighter, more accurate bass for rock, jazz, and SQL listening. Set your amplifier's low-pass crossover at 80Hz and subsonic filter at 28Hz for ported enclosures. Use 8 AWG or heavier speaker wire from amp to sub, and 4-gauge power and ground wire to your amplifier.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub 122\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e12\" (300mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e400W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e1,200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (1W\/1m)\u003c\/td\u003e\n\u003ctd\u003e86dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e30Hz – 500Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e2 or 4 ohms (SSI™ Selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice Coil Diameter\u003c\/td\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone Material\u003c\/td\u003e\n\u003ctd\u003ePolypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround Material\u003c\/td\u003e\n\u003ctd\u003eHigh-Roll Rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet\u003c\/td\u003e\n\u003ctd\u003eDouble-Stacked\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasket\u003c\/td\u003e\n\u003ctd\u003eVented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout Diameter\u003c\/td\u003e\n\u003ctd\u003e28.3 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Depth\u003c\/td\u003e\n\u003ctd\u003e13.9 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the SSI™ Selectable Smart Impedance work?\u003c\/strong\u003e\u003cbr\u003eA: The Club 122 has a built-in impedance selector that lets you configure the subwoofer at either 2 ohms or 4 ohms. Select 2 ohms to maximize power output from a high-current amplifier, or 4 ohms for cleaner, more efficient operation. No rewiring or separate DVC wiring configurations required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier pairs best with the Club 122?\u003c\/strong\u003e\u003cbr\u003eA: A mono amplifier rated 300–400W RMS at your chosen impedance is ideal. The JBL Stage GT 50011 (300W at 4Ω \/ 500W at 2Ω) is a strong match. The JBL Club A1000 provides more headroom — keep gain conservative. Contact us at Trinity Car Audio for a specific recommendation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Club 122 compare to the Club 102 and Stadium 122SSI?\u003c\/strong\u003e\u003cbr\u003eA: The Club 102 is a 10\" sub at 350W RMS with SSI™. The Club 122 steps up to 12\" and 400W RMS for more cone area and deeper bass extension (30Hz vs 35Hz). The Stadium 122SSI is the flagship 12\" at 500W RMS with an aero-cooled voice coil for even higher thermal headroom. Choose the Club 122 for the best balance of Club Series performance and value in a 12\" format.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What enclosure type should I use with the Club 122?\u003c\/strong\u003e\u003cbr\u003eA: A ported enclosure tuned to 32–38Hz maximizes output for bass-heavy music. A sealed enclosure delivers tighter, more accurate bass for everyday listening. Contact us at Trinity Car Audio for specific enclosure volume and tuning recommendations for your vehicle.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698237014083,"sku":"JBLSUBCB122","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_CLUB_122_FRONT_45235_X1_156614b4-a62b-4357-9a7c-fc7812468eea.png?v=1787255825"},{"product_id":"jbl-stadium-62f","title":"JBL Stadium 62F 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stadium 62F 6.5\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 85W RMS \/ 255W peak power at a 3.0-ohm nominal impedance, bringing Stadium Series flagship engineering to a coaxial format. Glass-fiber Plus One™ woofer, high-resolution aluminum dome tweeter to 40kHz, UniPivot tweeter mount, and push-button level control — Stadium Series performance without the component install complexity, in a 6.5\" drop-in package.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ glass-fiber cone architecture\u003c\/strong\u003e — glass-fiber reinforcement adds rigidity and reduces unwanted flex compared to polypropylene, delivering tighter, more accurate bass reproduction with deeper extension down to 45Hz. The Plus One™ design increases effective cone area beyond a standard 6.5\" driver for more bass output and musical body. Sensitivity reaches 93dB at 2.83V for exceptional output efficiency. The integrated \u003cstrong\u003ehigh-resolution aluminum dome tweeter\u003c\/strong\u003e extends all the way to 40kHz, resolving ultra-fine detail in hi-res audio files that standard silk dome tweeters simply can't reproduce. The \u003cstrong\u003eUniPivot tweeter mount\u003c\/strong\u003e lets you aim the tweeter's dispersion axis toward the listening position even after installation — a rare feature in a coaxial design. A \u003cstrong\u003eselectable 0dB \/ -3dB tweeter level control\u003c\/strong\u003e lets you tune the high-frequency balance to your vehicle's acoustics. Frequency response spans 45Hz to 40kHz for extraordinary full-range coverage.\u003c\/p\u003e\n\n\u003cp\u003ePair with a 4-channel amplifier rated 60–100W RMS per channel, stable at 2–4 ohms. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker, so choose an amp with adequate headroom. Mount in the factory 6.5\" door location using the included hardware. Use the UniPivot mount to aim the tweeter toward the driver or passenger seat for the best soundstage. Ideal for hi-res audio listeners and enthusiasts who want Stadium Series performance in a plug-and-play coaxial format.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stadium 62F?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Glass-Fiber Cone:\u003c\/strong\u003e Rigid glass-fiber construction delivers tighter bass and more accurate midrange than polypropylene — deeper extension down to 45Hz in a 6.5\" coaxial.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome Tweeter to 40kHz:\u003c\/strong\u003e Resolves ultra-fine detail from hi-res audio sources — airy, extended highs that standard silk dome tweeters can't match.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniPivot Tweeter Mount:\u003c\/strong\u003e Aim the tweeter toward the listening position for focused soundstage imaging — a rare feature in a coaxial speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level (0dB \/ -3dB):\u003c\/strong\u003e One-click high-frequency tuning to match your vehicle's acoustic character.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e93dB Sensitivity:\u003c\/strong\u003e Exceptional efficiency — more output per watt, more dynamic headroom from your amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e85W RMS \/ 255W Peak Power Handling:\u003c\/strong\u003e Built for real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45Hz – 40kHz Frequency Response:\u003c\/strong\u003e Extraordinary bandwidth — from punchy bass extension to ultra-high-frequency detail well beyond standard speaker range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-In 6.5\" Coaxial Format:\u003c\/strong\u003e Stadium Series performance in a plug-and-play package — no component install complexity required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003ePair the Stadium 62F with a 4-channel amplifier rated 60–100W RMS per channel, stable at 2–4 ohms. The 3.0-ohm impedance draws more current than a 4-ohm speaker — choose an amp with headroom. Mount in the factory 6.5\" door location. Use the UniPivot mount to aim the tweeter toward the driver or passenger seat for the best soundstage imaging. Use 14-gauge or heavier speaker wire for runs over 6 feet. A DSP processor with time alignment will further enhance the imaging and staging these speakers are capable of.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTADIUM 62F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e6.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e85W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e255W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e93dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e45Hz – 40kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass Fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003eHigh-Resolution Aluminum Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Mount\u003c\/td\u003e\n\u003ctd\u003eUniPivot (Adjustable Aim)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Level Control\u003c\/td\u003e\n\u003ctd\u003e0dB \/ -3dB Selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Stadium 62F and the Stadium 862F?\u003c\/strong\u003e\u003cbr\u003eA: Both are Stadium Series coaxials with the same glass-fiber Plus One™ cone, aluminum dome tweeter to 40kHz, and UniPivot mount. The 62F is a 6.5\" speaker for standard door locations; the 862F is a 6x8\" speaker for Ford, Jeep, Mazda, and other vehicles with oval OEM locations. Choose based on your vehicle's speaker size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Stadium 62F?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 60–100W RMS per channel, stable at 2–4 ohms, is ideal. The 3.0-ohm impedance draws more current than a 4-ohm speaker — choose an amp with headroom. A DSP processor will further enhance imaging and staging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stadium 62F off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: You can, and the 93dB sensitivity will give you solid output. However, to fully unlock the 85W RMS capability and the dynamic range these speakers are capable of, an external amplifier is strongly recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the UniPivot tweeter mount work?\u003c\/strong\u003e\u003cbr\u003eA: The UniPivot mount allows you to pivot and aim the tweeter's dispersion axis toward the listening position — driver seat, passenger seat, or anywhere in between. This gives you a significant advantage in soundstage imaging compared to fixed-position coaxial tweeters, even after installation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698237079619,"sku":"JBLSPKSD62FAM","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_STADIUM_62F_HERO_TRANSPARENT.png?v=1787255825"},{"product_id":"jbl-stage-122-car-audio-subwoofer","title":"JBL Stage 122 12\" 250W Car Subwoofer","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage 122 12\" 250W Car Subwoofer\u003c\/strong\u003e delivers 250W RMS \/ 1,000W peak power at a single 4-ohm impedance, individually voiced by JBL's transducer engineers to deliver that unmistakable JBL signature bass character. If you want a straightforward, no-frills 12\" subwoofer with proven JBL engineering at an accessible price point, the Stage 122 is the move.\u003c\/p\u003e\n\n\u003cp\u003eThe Stage 122 is built around a \u003cstrong\u003epolypropylene cone\u003c\/strong\u003e — lightweight and rigid for accurate, low-distortion bass reproduction with frequency response reaching down to 34Hz. The \u003cstrong\u003ehi-roll rubber surround\u003c\/strong\u003e maximizes cone excursion for deep, punchy bass while maintaining long-term durability in demanding in-car environments. The \u003cstrong\u003e2\" (50.8mm) voice coil\u003c\/strong\u003e handles the 250W RMS thermal load efficiently, and the single \u003cstrong\u003e4-ohm impedance\u003c\/strong\u003e keeps wiring simple — connect directly to any mono amplifier rated at 4 ohms without worrying about DVC wiring configurations. Sensitivity reaches 91dB at 2.83V for strong output efficiency. Frequency response spans 34Hz to 200Hz, covering the full subwoofer range from deep sub-bass to upper bass punch. Each Stage 122 is \u003cstrong\u003eindividually voiced by JBL transducer experts\u003c\/strong\u003e to ensure consistent sonic character across the lineup.\u003c\/p\u003e\n\n\u003cp\u003ePair the Stage 122 with a mono amplifier rated 150–250W RMS at 4 ohms. The JBL Stage GT 50011 at 300W RMS (4 ohms) is a natural match — slightly over-powered, so keep gain conservative. Use a ported enclosure tuned to 35–40Hz for maximum output, or a sealed enclosure for tighter, more accurate bass. The single 4-ohm impedance makes this one of the simplest subwoofers to wire and integrate into any system.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage 122?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividually Voiced by JBL Transducer Experts:\u003c\/strong\u003e Each unit is tuned to deliver consistent JBL signature bass character — not just spec-matched, but sonically validated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Lightweight and rigid for accurate, low-distortion bass reproduction down to 34Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Roll Rubber Surround:\u003c\/strong\u003e Maximizes cone excursion for deep, punchy bass while maintaining long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91dB Sensitivity:\u003c\/strong\u003e Efficient design delivers strong bass output without taxing your amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS \/ 1,000W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Impedance:\u003c\/strong\u003e Simple, straightforward wiring — no DVC configurations to manage, connects directly to any 4-ohm mono amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e34Hz – 200Hz Frequency Response:\u003c\/strong\u003e Deep sub-bass extension to upper bass punch — full subwoofer bandwidth coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessible Price Point:\u003c\/strong\u003e JBL Stage Series engineering and sonic character at an entry-level price — the ideal first subwoofer upgrade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Enclosure Recommendations\u003c\/h2\u003e\n\u003cp\u003ePair the Stage 122 with a mono amplifier rated 150–250W RMS at 4 ohms. The JBL Stage GT 50011 at 300W RMS (4 ohms) works well — keep the gain conservative to stay within the sub's 250W RMS rating. For enclosures: a ported box tuned to 35–40Hz maximizes output for hip-hop, EDM, and bass-heavy music. A sealed enclosure delivers tighter, more accurate bass for rock, jazz, and everyday listening. Set your amplifier's low-pass crossover at 80Hz and subsonic filter at 30Hz for ported enclosures. Use 8 AWG or heavier speaker wire from amp to sub, and 4-gauge power and ground wire to your amplifier.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eStage 122\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e12\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e250W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e1,000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e91dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e34Hz – 200Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (Single Voice Coil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice Coil Diameter\u003c\/td\u003e\n\u003ctd\u003e2\" (50.8mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone Material\u003c\/td\u003e\n\u003ctd\u003ePolypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround Material\u003c\/td\u003e\n\u003ctd\u003eHi-Roll Rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier pairs best with the Stage 122?\u003c\/strong\u003e\u003cbr\u003eA: A mono amplifier rated 150–250W RMS at 4 ohms is ideal. The JBL Stage GT 50011 at 300W RMS (4 ohms) is a natural match — keep the gain conservative to stay within the sub's 250W RMS rating. Contact us at Trinity Car Audio for a specific amp recommendation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the Stage 122 a single or dual voice coil subwoofer?\u003c\/strong\u003e\u003cbr\u003eA: The Stage 122 is a single voice coil (SVC) subwoofer at 4 ohms. This makes wiring simple and straightforward — connect directly to any 4-ohm mono amplifier without worrying about DVC wiring configurations. If you need impedance flexibility, consider the JBL Club 102 or Stadium 122SSI with SSI™ selectable impedance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What enclosure type should I use with the Stage 122?\u003c\/strong\u003e\u003cbr\u003eA: A ported enclosure tuned to 35–40Hz maximizes output for bass-heavy music genres. A sealed enclosure delivers tighter, more accurate bass for everyday listening. Contact us at Trinity Car Audio for specific enclosure volume and tuning recommendations for your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Stage 122 compare to the JBL Club 102 and Stadium 122SSI?\u003c\/strong\u003e\u003cbr\u003eA: The Stage 122 is the entry-level option — single 4-ohm, 250W RMS, straightforward wiring. The Club 102 (10\") adds SSI™ selectable impedance and a double-stacked magnet at 350W RMS. The Stadium 122SSI (12\") is the flagship — SSI™ selectable impedance, aero-cooled voice coil, and 500W RMS. Choose the Stage 122 for a clean, simple first subwoofer upgrade; step up to the Stadium 122SSI for maximum output and amplifier flexibility.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Dual 2 Ohm","offer_id":43698328666179,"sku":"JBLSUBST122AM-1","price":109.99,"currency_code":"USD","in_stock":true},{"title":"Dual 4 Ohm","offer_id":43698328698947,"sku":"JBLSUBST122AM-2","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_Stage_122_1605_WEB_Front_a47b66b9-d7fd-448e-8451-390363d1b5e4.png?v=1787255684"},{"product_id":"jbl-club-102","title":"JBL Club 102 10\" SSI Car Subwoofer","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club 102 10\" SSI Car Subwoofer\u003c\/strong\u003e delivers 350W RMS \/ 1,050W peak power with \u003cstrong\u003eSelectable Smart Impedance (SSI™) technology\u003c\/strong\u003e that lets you switch between 2 ohms and 4 ohms to match your amplifier's optimal output impedance. Double-stacked magnet, high-roll rubber surround, vented basket, and JBL's signature inverted dust cap — this is Club Series engineering in a compact 10\" package.\u003c\/p\u003e\n\n\u003cp\u003eThe SSI™ system is the headline feature: a built-in impedance selector lets you configure the sub at \u003cstrong\u003e2 ohms\u003c\/strong\u003e for maximum power output from a high-current amplifier, or \u003cstrong\u003e4 ohms\u003c\/strong\u003e for cleaner, more efficient operation. No rewiring, no separate DVC configurations — just select and connect. The \u003cstrong\u003edouble-stacked magnet\u003c\/strong\u003e provides a powerful, consistent magnetic field for high linear excursion and deep bass extension down to 35Hz. The \u003cstrong\u003ehigh-roll rubber surround\u003c\/strong\u003e maximizes cone excursion for rich, earth-shaking low frequencies while maintaining long-term durability. The \u003cstrong\u003evented basket\u003c\/strong\u003e channels moving air across the voice coil to dissipate heat during high-output operation, keeping thermals low and performance consistent. The \u003cstrong\u003e50mm voice coil\u003c\/strong\u003e handles the 350W RMS thermal load without compression. The polypropylene cone is lightweight and rigid for accurate bass reproduction. Up top, JBL's \u003cstrong\u003einverted dust cap with the iconic horn slash pattern\u003c\/strong\u003e adds visual flair, while concealed fasteners maintain a clean custom look. Sensitivity is 83dB at 1W\/1m; frequency response spans 35Hz to 500Hz. Cutout diameter is 22.9cm with a 13cm mounting depth — fits most standard 10\" enclosures and shallow-mount applications.\u003c\/p\u003e\n\n\u003cp\u003ePair the Club 102 with a mono amplifier rated 250–350W RMS at your chosen impedance. The JBL Stage GT 50011 at 300W RMS (4 ohms) or 500W RMS (2 ohms) is a natural match. Use a ported enclosure tuned to 35–40Hz for maximum output, or a sealed enclosure for tighter, more accurate bass. The compact 13cm mounting depth also makes this a strong candidate for under-seat or shallow-mount enclosure builds.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club 102?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSI™ Selectable Smart Impedance:\u003c\/strong\u003e Switch between 2 ohms and 4 ohms to match your amplifier's optimal output impedance — no rewiring, no separate DVC configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Stacked Magnet:\u003c\/strong\u003e Powerful, consistent magnetic field for high linear excursion and deep bass extension down to 35Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Rubber Surround:\u003c\/strong\u003e Maximizes cone excursion for rich, deep bass while maintaining long-term durability in demanding in-car environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Basket:\u003c\/strong\u003e Moving-air cooling keeps the voice coil thermally managed during high-output operation for consistent performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS \/ 1,050W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 13cm Mounting Depth:\u003c\/strong\u003e Fits standard 10\" enclosures and shallow-mount applications — ideal for space-constrained builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJBL Inverted Dust Cap with Horn Slash:\u003c\/strong\u003e Signature Club Series styling — looks as good as it sounds when the trunk lid goes up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35Hz – 500Hz Frequency Response:\u003c\/strong\u003e Deep bass extension from infrasonic rumble to upper bass punch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Enclosure Recommendations\u003c\/h2\u003e\n\u003cp\u003ePair the Club 102 with a mono amplifier rated 250–350W RMS at your chosen impedance. The JBL Stage GT 50011 is a natural match — 300W RMS at 4 ohms or 500W RMS at 2 ohms (slightly over-powered at 2 ohms, so keep gain conservative). For enclosures: a ported box tuned to 35–40Hz maximizes output for hip-hop, EDM, and bass-heavy music. A sealed enclosure delivers tighter, more accurate bass for rock, jazz, and SQL listening. The 13cm mounting depth also opens up under-seat enclosure options for space-constrained installs. Use 8 AWG or heavier speaker wire from amp to sub, and 4-gauge power and ground wire to your amplifier.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub 102\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e10\" (250mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e350W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e1,050W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (1W\/1m)\u003c\/td\u003e\n\u003ctd\u003e83dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e35Hz – 500Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e2 or 4 ohms (SSI™ Selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice Coil Diameter\u003c\/td\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone Material\u003c\/td\u003e\n\u003ctd\u003ePolypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround Material\u003c\/td\u003e\n\u003ctd\u003eHigh-Roll Rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet\u003c\/td\u003e\n\u003ctd\u003eDouble-Stacked\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasket\u003c\/td\u003e\n\u003ctd\u003eVented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout Diameter\u003c\/td\u003e\n\u003ctd\u003e22.9 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Depth\u003c\/td\u003e\n\u003ctd\u003e13 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e4.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the SSI™ Selectable Smart Impedance work?\u003c\/strong\u003e\u003cbr\u003eA: The Club 102 has a built-in impedance selector that lets you configure the subwoofer at either 2 ohms or 4 ohms. Select 2 ohms to maximize power output from a high-current amplifier, or 4 ohms for cleaner, more efficient operation. No rewiring or separate DVC wiring configurations required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier pairs best with the Club 102?\u003c\/strong\u003e\u003cbr\u003eA: A mono amplifier rated 250–350W RMS at your chosen impedance is ideal. The JBL Stage GT 50011 is a natural match — 300W RMS at 4 ohms or 500W RMS at 2 ohms. Contact us at Trinity Car Audio for a specific amp recommendation based on your system goals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the Club 102 suitable for a shallow-mount or under-seat enclosure?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the 13cm mounting depth makes the Club 102 a strong candidate for shallow-mount enclosures and under-seat builds where space is limited. Contact us at Trinity Car Audio for enclosure recommendations based on your vehicle and install location.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Should I choose Dual 2 Ohm or Dual 4 Ohm?\u003c\/strong\u003e\u003cbr\u003eA: Choose based on your amplifier's optimal output impedance. If your amp puts out its rated power at 2 ohms, select the 2-ohm configuration. If your amp is rated at 4 ohms, select the 4-ohm configuration for cleaner, more efficient operation. Contact us at Trinity Car Audio and we'll match you to the right configuration for your amp.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Dual 2 Ohm","offer_id":43698326798403,"sku":"JBLSUBCB102","price":169.99,"currency_code":"USD","in_stock":true},{"title":"Dual 4 Ohm","offer_id":43698326831171,"sku":"JBLSUBCB103","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_CLUB_102_FRONT_45217_X1_d1b26c13-3261-4dc7-a23e-8520a98b6084.png?v=1787255866"},{"product_id":"jbl-stage-gt-50011-amplifier","title":"JBL Stage GT 50011 500W Mono Class-D Subwoofer Amplifier","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage GT 50011 500W Mono Class-D Subwoofer Amplifier\u003c\/strong\u003e delivers 300W RMS at 4 ohms and \u003cstrong\u003e500W RMS at 2 ohms\u003c\/strong\u003e — 1,220W peak — in a compact chassis built for tight installs. Class-D efficiency, a parametric bass EQ with adjustable frequency and Q-factor, variable low-pass crossover, variable phase control, speaker-level inputs, start-stop compatibility, and a remote bass control module — this is a feature-rich mono amp at an accessible price point.\u003c\/p\u003e\n\n\u003cp\u003eThe Stage GT 50011 runs in \u003cstrong\u003eClass-D\u003c\/strong\u003e for maximum thermal efficiency — less heat, smaller chassis, lower current draw, and reliable long-term operation in under-seat or behind-panel installs. Power output is \u003cstrong\u003e300W RMS at 4 ohms\u003c\/strong\u003e and \u003cstrong\u003e500W RMS at 2 ohms\u003c\/strong\u003e, covering most 10\"–12\" subwoofers rated in that range. Frequency response spans 10Hz to 320Hz (±1dB) with THD+N at 1% at rated output. The onboard \u003cstrong\u003eparametric bass EQ\u003c\/strong\u003e is a standout feature at this price — adjustable level (0–12dB), adjustable frequency (30–100Hz), and adjustable Q-factor (Narrow to Wide) let you sculpt your sub's bass character precisely without a separate processor. The \u003cstrong\u003evariable low-pass filter (32–320Hz)\u003c\/strong\u003e handles subwoofer integration and speaker protection. The \u003cstrong\u003evariable phase control (0°–180°)\u003c\/strong\u003e — not just a 2-position switch — lets you fine-tune phase alignment between your subwoofer and main speakers for maximum bass output. Both \u003cstrong\u003ehigh-level (0.2V–5V) and low-level (1V–25V) inputs\u003c\/strong\u003e are supported for factory or aftermarket integration. Full protection suite covers DCP, OVP, UVP, OCP, and OTP. Operating voltage of 9V–16V ensures start-stop vehicle compatibility. Fuse rating is 30A x2 (60A total).\u003c\/p\u003e\n\n\u003cp\u003ePair the Stage GT 50011 with a subwoofer rated 300–500W RMS. Wire a DVC sub to 2 ohms to take full advantage of the 500W RMS output. Use a ported enclosure tuned to 30–35Hz for maximum low-frequency extension, or a sealed enclosure for tighter, more accurate bass. Pairs naturally with JBL Stage3 Series speakers for a matched JBL system.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage GT 50011?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS at 2 Ohms:\u003c\/strong\u003e Serious subwoofer power in a compact chassis — enough to drive most 10\"–12\" subwoofers to their rated RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParametric Bass EQ (Level + Frequency + Q-Factor):\u003c\/strong\u003e Adjustable level, frequency, and bandwidth — sculpt your sub's bass character precisely without a separate processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Phase Control (0°–180°):\u003c\/strong\u003e Continuously variable phase — not just a 2-position switch — for precise phase alignment between sub and main speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Efficiency:\u003c\/strong\u003e Maximum power output with minimum heat generation — compact chassis, lower current draw, reliable long-term operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter (32–320Hz):\u003c\/strong\u003e Full subwoofer integration control — set your crossover point precisely without a separate processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Inputs:\u003c\/strong\u003e Connects directly to factory head unit speaker outputs — no line output converter required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart-Stop Vehicle Compatible:\u003c\/strong\u003e 9V–16V operating range handles the voltage fluctuations of modern start-stop electrical systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Control Included:\u003c\/strong\u003e Keep subwoofer level control at your fingertips from the driver's seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWiring \u0026amp; System Recommendations\u003c\/h2\u003e\n\u003cp\u003eUse 4-gauge power and ground wire — fuse within 18 inches of the battery at 60A total (30A x2). For maximum output, wire a DVC subwoofer to 2 ohms and run the amp at 500W RMS. Set the low-pass crossover at 80Hz and use the parametric bass EQ to add 3–6dB of boost at 40–50Hz for ported enclosures — start conservative and increase to taste. Set the subsonic filter (if available on your head unit or DSP) at 25Hz for ported enclosures to protect the subwoofer from infrasonic content. Use 8 AWG or heavier speaker wire from amp to subwoofer. Pairs naturally with JBL Stage3 Series speakers for a fully matched JBL system.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE GT 50011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Class\u003c\/td\u003e\n\u003ctd\u003eClass-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003eMono (1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (4Ω)\u003c\/td\u003e\n\u003ctd\u003e300W RMS x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (2Ω)\u003c\/td\u003e\n\u003ctd\u003e500W RMS x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Power\u003c\/td\u003e\n\u003ctd\u003e1,220W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e10Hz – 320Hz (±1dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N @ ROP\u003c\/td\u003e\n\u003ctd\u003e1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Sensitivity (Low)\u003c\/td\u003e\n\u003ctd\u003e1V – 25V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Sensitivity (High)\u003c\/td\u003e\n\u003ctd\u003e0.2V – 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBass EQ Level\u003c\/td\u003e\n\u003ctd\u003e0 – 12dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBass EQ Frequency\u003c\/td\u003e\n\u003ctd\u003e30Hz – 100Hz (Variable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBass EQ Width\u003c\/td\u003e\n\u003ctd\u003eNarrow – Wide (Variable Q)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhase Control\u003c\/td\u003e\n\u003ctd\u003e0° – 180° (Variable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-Pass Filter\u003c\/td\u003e\n\u003ctd\u003e32Hz – 320Hz (Variable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eDCP, OVP, UVP, OCP, OTP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e9V – 16V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse Rating\u003c\/td\u003e\n\u003ctd\u003e30A x2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e2.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What subwoofer pairs best with the Stage GT 50011?\u003c\/strong\u003e\u003cbr\u003eA: Any subwoofer rated 300–500W RMS is a strong match. Wire a DVC sub to 2 ohms to take full advantage of the 500W RMS output. Contact us at Trinity Car Audio for a specific subwoofer recommendation based on your enclosure and goals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use the Stage GT 50011 with my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the high-level inputs (0.2V–5V) connect directly to your factory head unit's speaker outputs without a line output converter. This makes it one of the easiest mono amplifiers to integrate into an OEM system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What makes the parametric bass EQ better than a standard bass boost?\u003c\/strong\u003e\u003cbr\u003eA: A standard bass boost adds a fixed amount of gain at a fixed frequency. The Stage GT 50011's parametric EQ lets you choose the boost frequency (30–100Hz), the boost level (0–12dB), and the bandwidth (Narrow to Wide Q). This means you can target exactly the frequency your subwoofer and enclosure need a boost at, rather than applying a generic boost that may cause unwanted coloration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the Stage GT 50011 compatible with start-stop vehicles?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the 9V–16V operating voltage range is specifically designed to handle the voltage fluctuations of modern start-stop electrical systems without shutting down or causing noise.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698237505603,"sku":"JBLSTAGEGT50011AM","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_GT_50011_HERO_0020_x1_ecdc8e49-8545-418c-8f4c-659a7feb942b.png?v=1787255868"},{"product_id":"jbl-club-a1000-mono-subwoofer-car-amplifier","title":"JBL Club A1000 1,000W Mono Class-D Subwoofer Amplifier","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club A1000 1,000W Mono Class-D Subwoofer Amplifier\u003c\/strong\u003e delivers 600W RMS at 4 ohms and \u003cstrong\u003e1,000W RMS at 2 ohms\u003c\/strong\u003e — 2,000W peak — in a compact 32cm x 5.1cm x 18cm chassis. Class-D efficiency, variable low-pass filter, bass boost, phase switch, speaker-level inputs, and a 5-meter wired remote module make this a complete, no-compromise mono subwoofer amplifier for any system build.\u003c\/p\u003e\n\n\u003cp\u003eThe Club A1000 runs in \u003cstrong\u003eClass-D\u003c\/strong\u003e, the most thermally efficient amplifier topology available — less heat generated means a smaller chassis, lower current draw, and more reliable long-term operation. Power output scales cleanly: \u003cstrong\u003e600W RMS at 4 ohms\u003c\/strong\u003e for standard single or dual voice coil subwoofers wired to 4 ohms, and \u003cstrong\u003e1,000W RMS at 2 ohms\u003c\/strong\u003e for maximum output from a DVC sub wired to 2 ohms. Frequency response spans 10Hz to 320Hz, covering the full subwoofer range from infrasonic rumble to upper bass punch. The \u003cstrong\u003evariable low-pass filter (32–320Hz, 12dB\/octave)\u003c\/strong\u003e handles subwoofer integration and speaker protection in one control. The \u003cstrong\u003evariable bass boost (0–12dB at 45Hz)\u003c\/strong\u003e adds low-end punch without a separate processor. The \u003cstrong\u003e0°\/180° phase switch\u003c\/strong\u003e aligns your subwoofer's phase with your main speakers for maximum bass output and impact. Both \u003cstrong\u003epreamp (RCA) and speaker-level inputs\u003c\/strong\u003e are supported for seamless integration with factory head units or aftermarket sources. The included \u003cstrong\u003e5-meter wired remote module\u003c\/strong\u003e keeps subwoofer level control at your fingertips from the driver's seat. Fuse rating is 3 x 35A (105A total) — use 4-gauge or heavier power and ground wire.\u003c\/p\u003e\n\n\u003cp\u003ePair the Club A1000 with any subwoofer rated 500–1,000W RMS. Wire a DVC sub to 2 ohms to take full advantage of the 1,000W RMS output. Use a ported enclosure tuned to 30–35Hz for maximum low-frequency extension, or a sealed enclosure for tighter, more accurate bass. The Club A1000 pairs naturally with the JBL Stadium 122SSI subwoofer — set the SSI™ selector to 2 ohms and you have a perfectly matched 1,000W system.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club A1000?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W RMS at 2 Ohms:\u003c\/strong\u003e Serious subwoofer power in a compact chassis — enough to drive virtually any 12\" or 15\" subwoofer to its rated RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Efficiency:\u003c\/strong\u003e Maximum power output with minimum heat generation — compact chassis, lower current draw, reliable long-term operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter (32–320Hz, 12dB\/oct):\u003c\/strong\u003e Full subwoofer integration control — set your crossover point precisely without a separate processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost (0–12dB @ 45Hz):\u003c\/strong\u003e Dial in sub punch without a separate EQ — tunable from flat to +12dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0°\/180° Phase Switch:\u003c\/strong\u003e Align your subwoofer's phase with your main speakers for maximum bass output and impact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Inputs:\u003c\/strong\u003e Connects directly to factory head unit speaker outputs — no line output converter required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Meter Wired Remote Module:\u003c\/strong\u003e Keep subwoofer level control at your fingertips from the driver's seat — included in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Chassis (32cm x 5.1cm x 18cm):\u003c\/strong\u003e Fits under seats, behind panels, or in tight trunk locations without sacrificing power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWiring \u0026amp; System Recommendations\u003c\/h2\u003e\n\u003cp\u003eUse 4-gauge power and ground wire — fuse within 18 inches of the battery at 105A total (3 x 35A). For maximum output, wire a DVC subwoofer to 2 ohms and run the amp at 1,000W RMS. Set the low-pass crossover at 80Hz and the subsonic filter (if available on your head unit or DSP) at 25Hz for ported enclosures. Start the bass boost at 0dB and increase only if needed — excessive boost at high volume can cause clipping and damage your subwoofer. The Club A1000 pairs naturally with the JBL Stadium 122SSI — set the SSI™ selector to 2 ohms for a perfectly matched 1,000W system. Use 8 AWG or heavier speaker wire from amp to subwoofer.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub A1000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Class\u003c\/td\u003e\n\u003ctd\u003eClass-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003eMono (1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (4Ω)\u003c\/td\u003e\n\u003ctd\u003e600W RMS x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (2Ω)\u003c\/td\u003e\n\u003ctd\u003e1,000W RMS x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Power\u003c\/td\u003e\n\u003ctd\u003e2,000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e10Hz – 320Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-Pass Filter\u003c\/td\u003e\n\u003ctd\u003eVariable, 32–320Hz, 12dB\/oct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBass Boost\u003c\/td\u003e\n\u003ctd\u003e0–12dB @ 45Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhase Switch\u003c\/td\u003e\n\u003ctd\u003e0° \/ 180°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003ePreamp (RCA) \u0026amp; Speaker-Level\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse Rating\u003c\/td\u003e\n\u003ctd\u003e35A x3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Cable Length\u003c\/td\u003e\n\u003ctd\u003e5.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e32.0cm x 5.1cm x 18.0cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e4.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What subwoofer pairs best with the Club A1000?\u003c\/strong\u003e\u003cbr\u003eA: Any subwoofer rated 500–1,000W RMS is a strong match. The JBL Stadium 122SSI is the natural pairing — set the SSI™ selector to 2 ohms and you have a perfectly matched 1,000W system. Contact us at Trinity Car Audio for a specific subwoofer recommendation based on your enclosure and goals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use the Club A1000 with my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the speaker-level inputs connect directly to your factory head unit's speaker outputs without a line output converter. This makes it one of the easiest mono amplifiers to integrate into an OEM system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I wire my subwoofer to get 1,000W RMS?\u003c\/strong\u003e\u003cbr\u003eA: Wire a dual voice coil (DVC) subwoofer to a 2-ohm final impedance. For a DVC 2-ohm sub, wire the coils in parallel for 1 ohm (too low) or in series for 4 ohms — use a DVC 4-ohm sub wired in parallel for 2 ohms to hit the 1,000W RMS output. Contact us at Trinity Car Audio and we'll confirm the right wiring configuration for your specific subwoofer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What gauge power wire do I need for the Club A1000?\u003c\/strong\u003e\u003cbr\u003eA: Use 4-gauge power and ground wire for runs up to 12 feet. For longer runs or high-demand installs, step up to 2-gauge. Fuse within 18 inches of the battery at 105A total (3 x 35A fuses).\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698237636675,"sku":"AMPCBA1000AM","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_Club_a1000_1605x1605_hero.png?v=1787255880"},{"product_id":"jbl-stadium-122ssi-car-audio-subwoofer","title":"JBL Stadium 122SSI 12\" Component Subwoofer","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stadium 122SSI 12\" Component Subwoofer\u003c\/strong\u003e delivers 500W RMS \/ 1,500W peak power with a frequency response reaching down to 25Hz — and its exclusive \u003cstrong\u003eSelectable Smart Impedance (SSI™) technology\u003c\/strong\u003e lets you switch between 2 ohms and 4 ohms to match your amplifier's optimal output impedance. One subwoofer, two impedance options, maximum amplifier compatibility. This is Stadium Series engineering applied to the low end.\u003c\/p\u003e\n\n\u003cp\u003eThe SSI™ system is the headline feature: a built-in impedance selector lets you configure the sub at \u003cstrong\u003e2 ohms\u003c\/strong\u003e for maximum power output from a high-current amplifier, or \u003cstrong\u003e4 ohms\u003c\/strong\u003e for cleaner, more efficient operation with amplifiers that perform best at higher impedance loads. No rewiring, no separate DVC configurations to manage — just flip and go. The \u003cstrong\u003e2\" (50mm) aero-cooled voice coil\u003c\/strong\u003e uses moving air to dissipate heat during high-output operation, keeping thermals low and performance consistent even during extended high-volume listening. Sensitivity reaches 92dB at 2.83V for strong output efficiency. Frequency response spans 25Hz to 175Hz, covering everything from infrasonic sub-bass rumble to upper bass punch. The \u003cstrong\u003eintegrated push terminals accept up to 8 AWG speaker wire\u003c\/strong\u003e for low-resistance current delivery at high power levels. Cutout diameter is 28.5cm with an 18.0cm mounting depth — fits most standard 12\" enclosures.\u003c\/p\u003e\n\n\u003cp\u003ePair the Stadium 122SSI with a mono amplifier rated 400–500W RMS at your chosen impedance — the JBL Club A5055's 500W RMS sub channel at 2 ohms is a natural match. Use a ported enclosure tuned to 30–35Hz for maximum low-frequency extension and output, or a sealed enclosure for tighter, more accurate bass. Ideal for daily listening, SQL (Sound Quality Listening), and enthusiast builds where both output and accuracy matter.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stadium 122SSI?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSI™ Selectable Smart Impedance:\u003c\/strong\u003e Switch between 2 ohms and 4 ohms to match your amplifier's optimal output impedance — no rewiring, no separate DVC configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2\" Aero-Cooled Voice Coil:\u003c\/strong\u003e Moving-air cooling keeps thermals low during high-output operation for consistent performance and long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS \/ 1,500W Peak Power Handling:\u003c\/strong\u003e Serious headroom for high-powered mono amplifiers without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92dB Sensitivity:\u003c\/strong\u003e Efficient design delivers strong bass output without taxing your amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25Hz – 175Hz Frequency Response:\u003c\/strong\u003e Deep infrasonic extension down to 25Hz — you'll feel it as much as hear it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 AWG Terminal Compatibility:\u003c\/strong\u003e Integrated push terminals accept up to 8 AWG wire for low-resistance, high-current delivery at rated power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStadium Series Engineering:\u003c\/strong\u003e Built to the same standards as JBL's flagship Stadium Series speakers — consistent sonic character across the full system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Amplifier Compatibility:\u003c\/strong\u003e 2 or 4 ohm operation means it works with virtually any mono amplifier on the market.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Enclosure Recommendations\u003c\/h2\u003e\n\u003cp\u003ePair the Stadium 122SSI with a mono amplifier rated 400–500W RMS at your chosen impedance. At 2 ohms, the JBL Club A5055's 500W RMS sub channel is a perfect match. At 4 ohms, any quality mono amp rated 300–500W RMS will work well. For enclosures: a ported box tuned to 30–35Hz maximizes low-frequency extension and output — ideal for hip-hop, EDM, and bass-heavy music. A sealed enclosure delivers tighter, more accurate bass with better transient response — ideal for rock, jazz, and SQL listening. Set your amplifier's low-pass crossover at 80Hz and subsonic filter at 25Hz for ported enclosures. Use 4-gauge power and ground wire to your amplifier, and 8 AWG or heavier speaker wire from amp to sub.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eStadium 122SSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e12\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e500W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e1,500W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e92dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e25Hz – 175Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e2 or 4 ohms (SSI™ Selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice Coil Diameter\u003c\/td\u003e\n\u003ctd\u003e2\" (50mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice Coil Cooling\u003c\/td\u003e\n\u003ctd\u003eAero-Cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal Compatibility\u003c\/td\u003e\n\u003ctd\u003eUp to 8 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout Diameter\u003c\/td\u003e\n\u003ctd\u003e28.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Depth\u003c\/td\u003e\n\u003ctd\u003e18.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the SSI™ Selectable Smart Impedance work?\u003c\/strong\u003e\u003cbr\u003eA: The Stadium 122SSI has a built-in impedance selector that lets you configure the subwoofer at either 2 ohms or 4 ohms. Select 2 ohms to maximize power output from a high-current amplifier, or 4 ohms for cleaner, more efficient operation. No rewiring or separate DVC wiring configurations required — just select your impedance and connect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier pairs best with the Stadium 122SSI?\u003c\/strong\u003e\u003cbr\u003eA: A mono amplifier rated 400–500W RMS at your chosen impedance is ideal. At 2 ohms, the JBL Club A5055's 500W RMS sub channel is a natural match. At 4 ohms, any quality mono amp rated 300–500W RMS will work well. Contact us at Trinity Car Audio for a specific amp recommendation based on your system goals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What enclosure type should I use with the Stadium 122SSI?\u003c\/strong\u003e\u003cbr\u003eA: A ported enclosure tuned to 30–35Hz maximizes low-frequency extension and output — ideal for bass-heavy music genres. A sealed enclosure delivers tighter, more accurate bass with better transient response — ideal for SQL listening and music accuracy. Contact us at Trinity Car Audio for specific enclosure volume and tuning recommendations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Should I choose Dual 2 Ohm or Dual 4 Ohm?\u003c\/strong\u003e\u003cbr\u003eA: Choose based on your amplifier's optimal output impedance. If your amp puts out its rated power at 2 ohms, select the 2-ohm configuration for maximum power transfer. If your amp is rated at 4 ohms, select the 4-ohm configuration for cleaner, more efficient operation. When in doubt, contact us at Trinity Car Audio and we'll match you to the right configuration for your amp.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Dual 2 Ohm","offer_id":43698311888963,"sku":"JBLSUBSD122SSIAM-1","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Dual 4 Ohm","offer_id":43698311921731,"sku":"JBLSUBSD122SSIAM-2","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/FRONT_WEB_JBL_Stadium_122SSI_1605.png?v=1787261164"},{"product_id":"jbl-club-a5055-5-channel-car-amplifier","title":"JBL Club A5055 5-Channel Car Amplifier","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club A5055 5-Channel Car Amplifier\u003c\/strong\u003e is the complete system amplifier — 50W RMS x4 at 4 ohms (65W RMS x4 at 2 ohms) for your speakers, plus 320W RMS x1 at 4 ohms (500W RMS x1 at 2 ohms) for your subwoofer, all in a single chassis. One amp, one power run, one ground — full system power for front stage, rear fill, and sub. Bridge the front channels to 140W RMS x2 for a high-powered front stage alongside the 500W sub channel, and you have a 3-channel configuration that rivals dedicated multi-amp setups.\u003c\/p\u003e\n\n\u003cp\u003eThe Club A5055 is built around JBL's Club Series amplifier platform, delivering clean, efficient power across all five channels simultaneously. The four full-range channels handle 50W RMS x4 at 4 ohms or 65W RMS x4 at 2 ohms — enough to drive JBL Club Series component speakers to their rated power. The dedicated subwoofer channel puts out 320W RMS at 4 ohms or \u003cstrong\u003e500W RMS at 2 ohms\u003c\/strong\u003e, with a \u003cstrong\u003e0–12dB bass boost at 45Hz\u003c\/strong\u003e and a \u003cstrong\u003e0\/180-degree phase switch\u003c\/strong\u003e for precise sub integration. Variable \u003cstrong\u003ehigh-pass and low-pass crossover filters (32–320Hz, 12dB\/octave)\u003c\/strong\u003e on the front\/rear channels and a dedicated \u003cstrong\u003elow-pass filter (32–320Hz, 12dB\/octave)\u003c\/strong\u003e on the sub channel give you full system crossover control without a separate processor. Both preamp (RCA) and \u003cstrong\u003espeaker-level inputs\u003c\/strong\u003e are supported for seamless integration with factory head units or aftermarket sources. An included \u003cstrong\u003eremote bass knob\u003c\/strong\u003e keeps subwoofer level control at your fingertips. Fuse rating is 30A x3 (90A total); recommended wiring is 4-gauge power and ground.\u003c\/p\u003e\n\n\u003cp\u003eThe Club A5055 is the ideal single-amp solution for a complete JBL Club Series system — pair with Club 64C or Club 64CSQ component speakers up front, Club 64 coaxials in the rear, and a JBL Club Series subwoofer for a fully matched, high-output system. Dimensions: 36cm W x 5.1cm H x 18cm D. Weight: 4.2 kg.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club A5055?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 5-Channel System Amp:\u003c\/strong\u003e Powers front stage, rear fill, and subwoofer from a single chassis — one power run, one ground, complete system coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Subwoofer Channel (2Ω):\u003c\/strong\u003e Serious sub power — enough to drive most single or dual voice coil subwoofers to their rated RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Front Channels (140W RMS x2):\u003c\/strong\u003e Bridge channels 1+2 and 3+4 for a high-powered front stage alongside the dedicated sub channel — 3-channel mode for maximum front stage impact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers (32–320Hz, 12dB\/oct):\u003c\/strong\u003e Full system crossover control on all channels — no separate crossover or DSP required for basic system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0–12dB Bass Boost @ 45Hz:\u003c\/strong\u003e Dial in sub punch without a separate processor — tunable from flat to +12dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0\/180° Phase Switch:\u003c\/strong\u003e Align your subwoofer's phase with your main speakers for maximum bass output and impact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Inputs:\u003c\/strong\u003e Connects directly to factory head unit speaker outputs — no line output converter required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Knob Included:\u003c\/strong\u003e Keep subwoofer level control at your fingertips without reaching into the trunk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWiring \u0026amp; System Recommendations\u003c\/h2\u003e\n\u003cp\u003eUse 4-gauge power and ground wire — fuse within 18 inches of the battery at 90A total (30A x3). For a full JBL Club Series system: run channels 1+2 to front Club 64C or 64CSQ components (high-pass at 80Hz), channels 3+4 to rear Club 64 coaxials (high-pass at 80Hz), and the sub channel to a JBL Club Series subwoofer (low-pass at 80Hz). Set the sub channel bass boost to taste — start at 0dB and increase only if needed. For a 3-channel high-powered front stage, bridge channels 1+2 to 140W RMS and 3+4 to 140W RMS, and run the sub channel at 500W RMS into a 2-ohm load. A DSP processor between the head unit and amp will add time alignment and active crossover control for a significant performance upgrade.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub A5055\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (4Ω, Full Range)\u003c\/td\u003e\n\u003ctd\u003e50W RMS x4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (2Ω, Full Range)\u003c\/td\u003e\n\u003ctd\u003e65W RMS x4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridged Power (4Ω)\u003c\/td\u003e\n\u003ctd\u003e140W RMS x2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSub Channel Power (4Ω)\u003c\/td\u003e\n\u003ctd\u003e320W RMS x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSub Channel Power (2Ω)\u003c\/td\u003e\n\u003ctd\u003e500W RMS x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront\/Rear Crossover\u003c\/td\u003e\n\u003ctd\u003eHP\/LP Variable, 32–320Hz, 12dB\/oct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSub Crossover\u003c\/td\u003e\n\u003ctd\u003eLP Variable, 32–320Hz, 12dB\/oct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBass Boost\u003c\/td\u003e\n\u003ctd\u003e0–12dB @ 45Hz (Sub Channel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhase Switch\u003c\/td\u003e\n\u003ctd\u003e0° \/ 180° (Sub Channel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003ePreamp (RCA) \u0026amp; Speaker-Level\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse Rating\u003c\/td\u003e\n\u003ctd\u003e30A x3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Wiring\u003c\/td\u003e\n\u003ctd\u003e4-Gauge Power \u0026amp; Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e36cm x 5.1cm x 18cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use the Club A5055 with my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the speaker-level inputs connect directly to your factory head unit's speaker outputs without a line output converter. This makes it one of the easiest 5-channel amplifiers to integrate into an OEM system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I bridge the Club A5055 for more front stage power?\u003c\/strong\u003e\u003cbr\u003eA: Yes — bridge channels 1+2 for 140W RMS at 4 ohms and channels 3+4 for 140W RMS at 4 ohms, while the sub channel runs independently at up to 500W RMS at 2 ohms. This 3-channel configuration delivers a high-powered front stage alongside serious sub output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What subwoofer pairs best with the Club A5055?\u003c\/strong\u003e\u003cbr\u003eA: A JBL Club Series subwoofer rated 300–500W RMS is the natural match. Wire a dual voice coil sub to 2 ohms to take full advantage of the 500W RMS sub channel output. Contact us at Trinity Car Audio for a specific subwoofer recommendation based on your enclosure and goals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need a DSP processor with the Club A5055?\u003c\/strong\u003e\u003cbr\u003eA: Not for basic system integration — the onboard crossovers handle speaker protection and sub integration. However, a DSP processor adds time alignment, active crossover control, and equalization that will significantly improve soundstage imaging and overall system performance, especially with a component front stage.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698237734979,"sku":"AMPCBA5055AM","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_Club_a5055_1605x1605_hero.png?v=1787255908"},{"product_id":"jbl-stage3-968m-6x9-three-way-car-speakers","title":"JBL Stage3 968M 6x9\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage3 968M 6x9\" 3-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 80W RMS \/ 640W peak power at a True 4-ohm nominal impedance. Three-way design, glass-fiber Plus One™ cone, PEI dome tweeter, grilles and hardware included — this is the step-up from the 968MF for listeners who want the complete package right out of the box.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e with a \u003cstrong\u003e10% glass-fiber reinforced cone\u003c\/strong\u003e — the added rigidity reduces unwanted flex for tighter, more accurate bass reproduction with deeper extension down to 40Hz. The Plus One™ design increases effective cone area beyond a standard 6x9\" driver for more bass output and musical body. Sensitivity reaches 92dB at 2.83V, and the \u003cstrong\u003eTrue 4-ohm impedance\u003c\/strong\u003e is optimized to extract maximum clean power from both factory head units and aftermarket amplifiers. The 3-way design adds a dedicated \u003cstrong\u003ePEI balanced dome midrange and tweeter array\u003c\/strong\u003e, delivering smoother vocal reproduction and more refined high-frequency detail than a standard 2-way coaxial can achieve. Frequency response spans 40Hz to 20kHz for full musical coverage. Built with \u003cstrong\u003epost-consumer recycled plastics and PVC-free wiring\u003c\/strong\u003e. Each set includes \u003cstrong\u003ematching grilles, mounting screws, spade clips, and foam gaskets\u003c\/strong\u003e for a clean, complete install.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a straightforward drop-in for most vehicles with standard 6x9\" rear deck or door locations. Pair with a 4-channel amplifier rated 50–100W RMS per channel for the best results, or run directly off a quality head unit — the True 4-ohm design and 92dB sensitivity make these a strong performer in head-unit-only setups. Ideal for R\u0026amp;B, hip-hop, rock, and pop where bass punch, vocal clarity, and overall fullness matter most.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage3 968M?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Dedicated midrange and tweeter elements deliver smoother vocal reproduction and more refined highs than a standard 2-way coaxial.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Plus One™ Cone:\u003c\/strong\u003e 10% glass-fiber reinforcement adds rigidity for tighter bass and more accurate midrange — deeper extension down to 40Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Impedance:\u003c\/strong\u003e Optimized for maximum clean power transfer from factory head units and aftermarket amplifiers — no impedance mismatch, no wasted watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Smooth, detailed high-frequency reproduction without harshness — even at high listening volumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92dB Sensitivity:\u003c\/strong\u003e High-efficiency design delivers strong output per watt — ideal for head-unit-only installs or low-powered amp setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS \/ 640W Peak Power Handling:\u003c\/strong\u003e Serious headroom for real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrilles, Screws, Spade Clips \u0026amp; Foam Gaskets Included:\u003c\/strong\u003e Everything needed for a clean, complete install — no sourcing hardware separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-Friendly Construction:\u003c\/strong\u003e Post-consumer recycled plastics and PVC-free wiring — premium performance with a lighter environmental footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Stage3 968M's True 4-ohm impedance and 92dB sensitivity make it a strong performer off a factory head unit — you'll hear a significant improvement over OEM speakers immediately. For the best performance, pair with a 4-channel amp rated 50–100W RMS per channel at 4 ohms. Mount in the factory 6x9\" rear deck or door location using the included hardware and foam gaskets for a clean, rattle-free install. Use 16-gauge or heavier speaker wire for runs over 6 feet.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE3 968M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e3-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e6x9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e640W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e92dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e40Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (True 4-Ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass-Fiber Reinforced (10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003ePEI Balanced Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eGrilles, Mounting Screws, Spade Clips, Foam Gaskets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePost-Consumer Recycled Plastics, PVC-Free Wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e3.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Stage3 968M and the Stage3 968MF?\u003c\/strong\u003e\u003cbr\u003eA: Both are 6x9\" 3-way coaxials sharing the same Plus One™ glass-fiber cone, True 4-ohm design, power handling, and sensitivity specs. The key difference is that the 968M includes matching grilles, mounting screws, spade clips, and foam gaskets in the box — the 968MF does not include grilles. Choose the 968M for a complete out-of-the-box install; choose the 968MF if you're using factory grilles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stage3 968M off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the True 4-ohm impedance and 92dB sensitivity are designed to work well with factory head units. You'll hear a significant improvement over OEM speakers immediately. An external amplifier will unlock the full 80W RMS potential for even better dynamics and clarity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Stage3 968M?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 50–100W RMS per channel at 4 ohms is ideal. The True 4-ohm design ensures clean, efficient power transfer without impedance mismatch issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Stage3 968M fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: The 968M is designed for standard 6x9\" locations (rear deck or doors). Contact us at Trinity Car Audio with your vehicle's year, make, and model to confirm fitment before ordering.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698237833283,"sku":"JBLSPKS3968M","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_3_CAR_AUDIO_968M_HERO_0125_x1_c13fd394-2b34-4f7e-a354-50c7f16ab747.png?v=1787255889"},{"product_id":"jbl-stage3-68mf-6-1-2-three-way-car-speakers","title":"JBL Stage3 68MF 6.5\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage3 68MF 6.5\" 3-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 70W RMS \/ 560W peak power at a True 4-ohm nominal impedance, bringing a dedicated 3-way driver array to the standard 6.5\" door location. If you want more vocal presence and midrange detail than a 2-way coaxial can deliver — without the complexity of a component install — the Stage3 68MF is the answer.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e with a \u003cstrong\u003e10% glass-fiber reinforced cone\u003c\/strong\u003e — the added rigidity reduces unwanted flex for tighter, more accurate bass reproduction with deeper extension down to 55Hz. The Plus One™ design increases effective cone area beyond a standard 6.5\" driver for more bass output and musical body. Sensitivity reaches 91dB at 2.83V, and the \u003cstrong\u003eTrue 4-ohm impedance\u003c\/strong\u003e is optimized to extract maximum clean power from both factory head units and aftermarket amplifiers — compensating for factory wiring resistance that can rob power from lower-impedance speakers. The 3-way design adds a dedicated \u003cstrong\u003ePEI balanced dome midrange and tweeter array\u003c\/strong\u003e, delivering smoother vocal reproduction and more refined high-frequency detail than a standard 2-way coaxial can achieve. Frequency response spans 55Hz to 20kHz for full musical coverage. Built with \u003cstrong\u003eeco-friendly recycled plastics and PVC-free wiring\u003c\/strong\u003e. Note: grilles are not included.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a true drop-in for most vehicles with standard 6.5\" door locations. Pair with a 4-channel amplifier rated 40–80W RMS per channel for the best results, or run directly off a quality head unit — the True 4-ohm design and 91dB sensitivity make these a strong performer in head-unit-only setups. Ideal for R\u0026amp;B, hip-hop, rock, and pop where vocal clarity and midrange presence matter most.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage3 68MF?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Dedicated midrange and tweeter elements deliver smoother vocal reproduction and more refined highs than a standard 2-way coaxial — in a drop-in 6.5\" package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Plus One™ Cone:\u003c\/strong\u003e 10% glass-fiber reinforcement adds rigidity for tighter bass and more accurate midrange — deeper extension down to 55Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Impedance:\u003c\/strong\u003e Optimized for maximum clean power transfer from factory head units and aftermarket amplifiers — compensates for factory wiring resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Smooth, detailed high-frequency reproduction without harshness — even at high listening volumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91dB Sensitivity:\u003c\/strong\u003e High-efficiency design delivers strong output per watt — ideal for head-unit-only installs or low-powered amp setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS \/ 560W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55Hz – 20kHz Frequency Response:\u003c\/strong\u003e Full musical bandwidth from punchy bass to crisp high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-Friendly Construction:\u003c\/strong\u003e Recycled plastics and PVC-free wiring — premium performance with a lighter environmental footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Stage3 68MF's True 4-ohm impedance and 91dB sensitivity make it a strong performer off a factory head unit. For the best performance, pair with a 4-channel amp rated 40–80W RMS per channel at 4 ohms. Mount in the factory 6.5\" door location — no cutting or fabrication required in most vehicles. Use 16-gauge or heavier speaker wire for runs over 6 feet. Note: grilles are not included — use your factory grilles or source compatible aftermarket 6.5\" grilles separately.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE3 68MF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e3-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e6.5\" (165mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e70W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e560W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e91dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e55Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (True 4-Ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass-Fiber Reinforced (10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003ePEI Balanced Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrilles Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eRecycled Plastics, PVC-Free Wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Stage3 68MF and the Stage3 68CF?\u003c\/strong\u003e\u003cbr\u003eA: The 68MF is a 3-way coaxial — the midrange and tweeter are integrated into the woofer assembly for a single-hole drop-in install. The 68CF is a 2-way component system with a separate tweeter for better soundstage imaging. Choose the 68MF for simplicity and 3-way sound; choose the 68CF for component-level imaging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stage3 68MF off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the True 4-ohm impedance and 91dB sensitivity are designed to work well with factory head units. An external amplifier will unlock the full 70W RMS potential for even better dynamics and clarity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do grilles come included?\u003c\/strong\u003e\u003cbr\u003eA: No — grilles are not included. Use your factory 6.5\" grilles or source compatible aftermarket grilles separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Stage3 68MF fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: The 68MF is designed for standard 6.5\" OEM door locations. Contact us at Trinity Car Audio with your vehicle's year, make, and model to confirm fitment before ordering.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698237931587,"sku":"JBLSPKS368MF","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_3_CAR_AUDIO_68MF_HERO_0025_x1_518c3ee7-0573-4997-aefa-96076e16df8e.png?v=1787255895"},{"product_id":"jbl-stage3-868f-6x8-coaxial-car-speakers","title":"JBL Stage3 868F 6x8\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage3 868F 6x8\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 70W RMS \/ 560W peak power at a True 4-ohm nominal impedance, bringing Stage3 Series glass-fiber engineering to the popular 6x8\" format. A drop-in upgrade for Ford, Jeep, Mazda, and other vehicles with factory 6x8\" locations — more bass, cleaner highs, and a True 4-ohm design that works equally well off a head unit or an amp.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e with a \u003cstrong\u003e10% glass-fiber reinforced cone\u003c\/strong\u003e — the added rigidity reduces unwanted flex for tighter, more accurate bass reproduction with deeper extension down to 50Hz. The Plus One™ design increases effective cone area beyond a standard 6x8\" driver for more bass output and musical body. Sensitivity reaches 91dB at 2.83V, and the \u003cstrong\u003eTrue 4-ohm impedance\u003c\/strong\u003e is optimized to extract maximum clean power from both factory head units and aftermarket amplifiers. The integrated \u003cstrong\u003ePEI balanced dome tweeter\u003c\/strong\u003e delivers smooth, detailed high-frequency reproduction that spreads evenly throughout the cabin without harshness or fatigue. Frequency response spans 50Hz to 20kHz for full musical coverage. Built with \u003cstrong\u003epost-consumer recycled plastics and PVC-free wiring\u003c\/strong\u003e — premium sound with a reduced environmental footprint.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a true drop-in for most vehicles with factory 6x8\" locations. Pair with a 4-channel amplifier rated 40–80W RMS per channel for the best results, or run directly off a quality head unit — the True 4-ohm design and 91dB sensitivity make these a strong performer in head-unit-only setups. Ideal for everyday listening across all genres where you want noticeably better sound without a complex install.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage3 868F?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Plus One™ Cone:\u003c\/strong\u003e 10% glass-fiber reinforcement delivers tighter bass and more accurate midrange than standard polypropylene — in a 6x8\" coaxial package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Impedance:\u003c\/strong\u003e Optimized for maximum clean power transfer from factory head units and aftermarket amplifiers — no impedance mismatch, no wasted watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Smooth, detailed high-frequency reproduction that spreads evenly throughout the cabin without harshness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91dB Sensitivity:\u003c\/strong\u003e Efficient design delivers solid output from both head units and amplifiers — a meaningful upgrade even without an external amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS \/ 560W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50Hz – 20kHz Frequency Response:\u003c\/strong\u003e Full musical bandwidth from punchy bass to crisp high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Drop-In Fit:\u003c\/strong\u003e Designed for standard 6x8\" OEM locations — no cutting or fabrication required in most vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-Friendly Construction:\u003c\/strong\u003e Post-consumer recycled plastics and PVC-free wiring — premium performance with a lighter environmental footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Stage3 868F's True 4-ohm impedance and 91dB sensitivity make it a strong performer off a factory head unit — you'll hear a clear improvement over OEM speakers right out of the box. For the best performance, pair with a 4-channel amp rated 40–80W RMS per channel at 4 ohms. Mount in the factory 6x8\" location — no cutting or fabrication required in most vehicles. Use 16-gauge or heavier speaker wire for runs over 6 feet to minimize resistance losses.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE3 868F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e6x8\" (152x203mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e70W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e560W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e91dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e50Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (True 4-Ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass-Fiber Reinforced (10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003ePEI Balanced Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePost-Consumer Recycled Plastics, PVC-Free Wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e2.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What vehicles use a 6x8\" speaker size?\u003c\/strong\u003e\u003cbr\u003eA: Common 6x8\" applications include Ford F-150, Mustang, Explorer, Ranger, Jeep Wrangler and Cherokee, Mazda vehicles, and many others. Contact us at Trinity Car Audio with your year, make, and model to confirm fitment before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stage3 868F off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the True 4-ohm impedance and 91dB sensitivity are designed to work well with factory head units. You'll hear a clear improvement over OEM speakers immediately. An external amplifier will unlock the full 70W RMS potential for even better dynamics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Stage3 868F?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 40–80W RMS per channel at 4 ohms is ideal. The True 4-ohm design ensures clean, efficient power transfer without impedance mismatch issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Stage3 868F compare to the Stage3 968MF?\u003c\/strong\u003e\u003cbr\u003eA: The 868F is a 2-way coaxial in a 6x8\" format, while the 968MF is a 3-way coaxial in a 6x9\" format with a dedicated midrange driver for improved vocal reproduction. If your vehicle has 6x8\" locations, the 868F is the right fit. If you have 6x9\" rear deck space and want more midrange detail, the 968MF is the step up.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698237964355,"sku":"JBLSPKS3868F","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_3_CAR_AUDIO_868F_HERO_0034_x1_42e6e9d9-854a-4d94-bd85-7c20ae37cd90.png?v=1787255889"},{"product_id":"jbl-stage-gt-60041-4-channel-class-d-amplifier","title":"JBL Stage GT 60041 4-Channel Class-D Car Amplifier","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage GT 60041 4-Channel Class-D Car Amplifier\u003c\/strong\u003e puts out 65W RMS x4 at 4 ohms, 90W RMS x4 at 2 ohms, or 180W RMS x2 bridged at 4 ohms — up to 1,240W peak — in a compact chassis built for real-world installs. Class-D efficiency, onboard bass EQ, variable crossovers, full protection circuitry, and OEM\/start-stop compatibility make this a versatile foundation for any speaker upgrade from a single pair to a full 4-speaker system.\u003c\/p\u003e\n\n\u003cp\u003eThe Stage GT 60041 runs in \u003cstrong\u003eClass-D\u003c\/strong\u003e, the most thermally efficient amplifier topology available — less heat generated means a smaller chassis, lower current draw, and more reliable long-term operation in tight install locations. Power output scales cleanly across impedance loads: \u003cstrong\u003e65W RMS x4 at 4 ohms\u003c\/strong\u003e for standard component or coaxial setups, \u003cstrong\u003e90W RMS x4 at 2 ohms\u003c\/strong\u003e for lower-impedance speakers like JBL's 3-ohm Club and Stadium Series drivers, and \u003cstrong\u003e180W RMS x2 bridged at 4 ohms\u003c\/strong\u003e for driving a subwoofer or a high-powered front stage. Frequency response is flat from 20Hz to 20kHz (±1dB) with THD+N at 1% at rated output power. The onboard \u003cstrong\u003evariable bass EQ at 45Hz (0–12dB boost)\u003c\/strong\u003e lets you add low-end punch without a separate processor. The \u003cstrong\u003evariable high-pass and low-pass crossover (32Hz–320Hz)\u003c\/strong\u003e handles speaker protection and subwoofer integration in one. Input sensitivity covers both high-level (0.2V–5V) and low-level (1V–25V) inputs for seamless integration with factory head units or aftermarket sources. Full protection suite covers short circuit (DCP), overvoltage (OVP), undervoltage (UVP), overcurrent (OCP), and overtemperature (OTP). Operating voltage range of 9V–16V ensures compatibility with modern start-stop vehicle electrical systems.\u003c\/p\u003e\n\n\u003cp\u003eThe Stage GT 60041 is an ideal amplifier for powering a full 4-speaker system — front and rear coaxials or a front component set plus rear fill. Bridge it to 2 channels to drive a subwoofer alongside a separate 2-channel amp for the front stage. Compact enough to mount under a seat, behind a panel, or in a trunk. Pair with JBL Stage3 or Club Series speakers for a matched JBL system with consistent sonic character.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage GT 60041?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Efficiency:\u003c\/strong\u003e Maximum power output with minimum heat generation — compact chassis, lower current draw, reliable long-term operation in tight install locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Power Modes:\u003c\/strong\u003e 65W RMS x4 at 4Ω, 90W RMS x4 at 2Ω, or 180W RMS x2 bridged at 4Ω — adapts to your speaker configuration and impedance load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass EQ (0–12dB @ 45Hz):\u003c\/strong\u003e Add low-end punch without a separate processor — tunable from flat to +12dB at 45Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossover (32Hz–320Hz):\u003c\/strong\u003e Onboard high-pass and low-pass filtering for speaker protection and subwoofer integration in one control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh \u0026amp; Low Level Inputs:\u003c\/strong\u003e Connects to factory head units (high-level) or aftermarket sources (low-level) without an additional line output converter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Protection Suite (DCP, OVP, UVP, OCP, OTP):\u003c\/strong\u003e Comprehensive protection against short circuits, voltage spikes, overcurrent, and overtemperature — the music never stops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart-Stop Vehicle Compatible:\u003c\/strong\u003e 9V–16V operating range handles the voltage fluctuations of modern start-stop electrical systems without shutting down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJBL Industrial Styling:\u003c\/strong\u003e Signature Stage GT aesthetic — looks as good as it sounds when the trunk lid goes up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWiring \u0026amp; System Recommendations\u003c\/h2\u003e\n\u003cp\u003eUse 4-gauge power and ground wire for runs up to 12 feet; step up to 2-gauge for longer runs or high-demand installs. Fuse rating is 20A x2 (40A total) — fuse within 18 inches of the battery. For a full 4-speaker system, run the amp in 4-channel mode with the crossover set to high-pass at 80–100Hz to protect your speakers from low-frequency content. To add a subwoofer, bridge channels 3+4 to drive a mono sub load and use channels 1+2 for the front stage. Pair with JBL Stage3 or Club Series speakers for a matched system. A DSP processor between the head unit and amp will add time alignment and active crossover control for a significant performance upgrade.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE GT 60041\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Class\u003c\/td\u003e\n\u003ctd\u003eClass-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (4Ω)\u003c\/td\u003e\n\u003ctd\u003e65W RMS x4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (2Ω)\u003c\/td\u003e\n\u003ctd\u003e90W RMS x4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (Bridged 4Ω)\u003c\/td\u003e\n\u003ctd\u003e180W RMS x2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Power\u003c\/td\u003e\n\u003ctd\u003e1,240W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e20Hz – 20kHz (±1dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N @ ROP\u003c\/td\u003e\n\u003ctd\u003e1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Sensitivity (Low)\u003c\/td\u003e\n\u003ctd\u003e1V – 25V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Sensitivity (High)\u003c\/td\u003e\n\u003ctd\u003e0.2V – 5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrossover (Variable)\u003c\/td\u003e\n\u003ctd\u003e32Hz – 320Hz (HP\/LP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBass EQ\u003c\/td\u003e\n\u003ctd\u003e0 – 12dB @ 45Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eDCP, OVP, UVP, OCP, OTP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e9V – 16V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse Rating\u003c\/td\u003e\n\u003ctd\u003e20A x2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e2.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use the Stage GT 60041 with my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the high-level input (0.2V–5V) connects directly to your factory speaker outputs without a line output converter. This makes it one of the easiest amplifiers to integrate into an OEM system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I bridge the Stage GT 60041 to run a subwoofer?\u003c\/strong\u003e\u003cbr\u003eA: Yes — bridge channels 3+4 for 180W RMS at 4 ohms to drive a subwoofer, and use channels 1+2 in stereo for the front stage. Set the low-pass crossover on the bridged channels and high-pass on the front channels for a clean system integration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the Stage GT 60041 compatible with start-stop vehicles?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the 9V–16V operating voltage range is specifically designed to handle the voltage fluctuations of modern start-stop electrical systems without shutting down or causing noise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What speakers pair best with the Stage GT 60041?\u003c\/strong\u003e\u003cbr\u003eA: JBL Stage3 and Club Series speakers are the natural match — the 2–4 ohm stable output pairs perfectly with JBL's 3-ohm Club and Stadium Series drivers. At 90W RMS x4 into 2 ohms, you're delivering close to the rated power of most JBL Club Series component systems.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698238357571,"sku":"JBLSTAGEGT60041AM","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_GT_60041_HERO_0027_x1_8d3a8517-d98b-47d7-8115-4d1cebee353f.png?v=1787255933"},{"product_id":"jbl-stadium-22s-2-midrange-car-audio-speakers","title":"JBL Stadium 22S 2\" Midrange Car Audio Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stadium 22S 2\" Midrange Car Audio Speakers\u003c\/strong\u003e deliver 50W RMS \/ 150W peak power at a 3.0-ohm nominal impedance, purpose-built to convert any 2-way component system into a full 3-way configuration. If your current setup is missing vocal presence, instrument body, and the midrange detail that sits between your woofer and tweeter, the Stadium 22S fills that gap with Stadium Series precision.\u003c\/p\u003e\n\n\u003cp\u003eOperating across a 500Hz to 7kHz frequency range, the Stadium 22S covers the most critical band in music — the range where vocals, guitars, keyboards, and most acoustic instruments live. At 94dB sensitivity, these 2\" drivers are exceptionally efficient, delivering strong, clear midrange output without taxing your amplifier. The 3.0-ohm impedance matches seamlessly with JBL Stadium Series component systems for consistent impedance loading across the full 3-way setup. The compact 2\" form factor fits in a wide range of OEM dash, door, and A-pillar locations, and the package includes \u003cstrong\u003ecustom mounting adapters, crossovers, and grilles\u003c\/strong\u003e for a clean, tailored installation. Whether you're upgrading a Stadium 62CF or 962CF system, or building a custom 3-way install from scratch, the Stadium 22S is the midrange driver that completes the picture.\u003c\/p\u003e\n\n\u003cp\u003eIntegrate the Stadium 22S into your existing 2-way component system by connecting it through the included crossover network, which handles the 500Hz–7kHz bandpass filtering automatically. For maximum control, use an active crossover or DSP processor with dedicated midrange channel output. Mount in the dash, door panel, or A-pillar using the included adapters and grilles. Pair with a Stadium Series component system and a multi-channel amplifier for a reference-level 3-way in-car audio experience.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stadium 22S?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500Hz – 7kHz Midrange Coverage:\u003c\/strong\u003e Fills the most critical frequency band in music — vocals, guitars, keyboards, and acoustic instruments reproduced with Stadium Series clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94dB Sensitivity:\u003c\/strong\u003e Exceptionally efficient — strong, detailed midrange output without taxing your amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way System Upgrade:\u003c\/strong\u003e Converts any JBL 2-way component system into a full 3-way configuration for dramatically improved vocal presence and midrange detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS \/ 150W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0-Ohm Impedance:\u003c\/strong\u003e Matches seamlessly with JBL Stadium Series component systems for consistent impedance loading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 2\" Form Factor:\u003c\/strong\u003e Fits a wide range of OEM dash, door, and A-pillar locations with minimal modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Mounting Adapters, Crossovers \u0026amp; Grilles Included:\u003c\/strong\u003e Everything needed for a clean, professional 3-way install right out of the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStadium Series Engineering:\u003c\/strong\u003e Built to the same standards as the Stadium 62CF and 962CF — consistent sonic character across the full 3-way system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Recommendations\u003c\/h2\u003e\n\u003cp\u003eConnect the Stadium 22S through the included crossover network for a passive 3-way setup — it handles the 500Hz–7kHz bandpass filtering automatically. For maximum control and precision, use an active crossover or DSP processor with a dedicated midrange channel output, allowing you to set exact crossover points and apply time alignment. Mount in the dash, door panel, or A-pillar using the included adapters and grilles. Aim the driver toward the listening position for the best midrange imaging. Use 18-gauge or heavier wire for midrange runs. Pairs best with a Stadium Series component system (62CF or 962CF) and a multi-channel amplifier with at least 6 channels.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTADIUM 22S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e2\" Midrange Driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e50W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e150W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e94dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e500Hz – 7kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Size\u003c\/td\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eMounting Adapters, Crossovers, Grilles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which JBL component systems does the Stadium 22S pair with?\u003c\/strong\u003e\u003cbr\u003eA: The Stadium 22S is designed to pair with JBL Stadium Series component systems, particularly the Stadium 62CF and Stadium 962CF. The matching 3.0-ohm impedance and Stadium Series crossover design ensure consistent sonic character across the full 3-way system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need a separate crossover for the Stadium 22S?\u003c\/strong\u003e\u003cbr\u003eA: No — a crossover network is included in the box for passive 3-way integration. For more precise active crossover control and time alignment, a DSP processor with a dedicated midrange channel output will take the system to reference level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Where should I mount the Stadium 22S?\u003c\/strong\u003e\u003cbr\u003eA: The dash, door panel, or A-pillar are the most common locations. Aim the driver toward the listening position for the best midrange imaging. The included mounting adapters and grilles accommodate a range of OEM locations with minimal modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How many amplifier channels do I need for a full 3-way system?\u003c\/strong\u003e\u003cbr\u003eA: A minimum of 6 channels — 2 for the woofers, 2 for the midranges, and 2 for the tweeters. A 6-channel amp or a combination of a 4-channel and a 2-channel amp will work. A DSP processor between the head unit and amplifier is strongly recommended for time alignment and active crossover control.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698238521411,"sku":"JBLSPKSD22SAM","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/Stadium_22S_Front.24_hero_1605_dddb73a7-e9e3-454d-8064-28e9a46a387e.png?v=1787255935"},{"product_id":"jbl-club-194t","title":"JBL Club 194T 1\" Component Car Audio Tweeters","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club 194T 1\" Component Car Audio Tweeters\u003c\/strong\u003e deliver 50W RMS \/ 150W peak power at a 3.0-ohm nominal impedance, engineered to add crisp, detailed high-frequency reproduction to any component system or as a standalone upgrade to a factory setup. With 92dB sensitivity, Starfish™ mounting adapters, and I-Mount™ hardware that angles up to ±40 degrees, the Club 194T gives you professional-grade tweeter placement flexibility in a compact, easy-to-install package.\u003c\/p\u003e\n\n\u003cp\u003eThe Club 194T covers the high-frequency spectrum from 3kHz to 20kHz — the critical range for vocal clarity, instrument detail, and stereo imaging. At 92dB sensitivity, these tweeters are exceptionally efficient, delivering strong output from both factory head units and aftermarket amplifiers without straining your source. The compact 4.4cm cutout diameter and 2.5cm mounting depth make them compatible with a wide range of OEM locations including A-pillars, sail panels, dash corners, and door panels. The included \u003cstrong\u003eStarfish™ mounting adapter\u003c\/strong\u003e uses break-off tabs to fit neatly behind factory grilles without modification, while the \u003cstrong\u003eI-Mount™ kit\u003c\/strong\u003e provides surface or flush mounting options with up to ±40 degrees of angle adjustment — so you can aim the tweeter's dispersion axis precisely toward the listening position for the best soundstage imaging. The 3.0-ohm impedance pairs seamlessly with JBL Club Series woofers and component systems.\u003c\/p\u003e\n\n\u003cp\u003eThe Club 194T is the ideal tweeter upgrade for anyone running a JBL Club Series component system, or for listeners who want to add a dedicated tweeter to an existing coaxial or factory setup. Pair with a 4-channel amplifier or run off a head unit — the 92dB sensitivity handles both with ease. Mount in the A-pillar or sail panel and use the ±40-degree angle adjustment to aim directly at the driver or passenger seat for a focused, wide soundstage.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club 194T?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e92dB Sensitivity:\u003c\/strong\u003e Exceptionally efficient — delivers strong, detailed high-frequency output from both factory head units and aftermarket amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarfish™ Mounting Adapter:\u003c\/strong\u003e Break-off tabs allow clean fitment behind factory grilles and OEM locations without cutting or modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI-Mount™ Kit (±40° Adjustment):\u003c\/strong\u003e Surface or flush mount with up to ±40 degrees of angle adjustment — aim the tweeter precisely toward the listening position for optimal imaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3kHz – 20kHz Frequency Response:\u003c\/strong\u003e Covers the full high-frequency spectrum for vocal clarity, instrument detail, and precise stereo imaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS \/ 150W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 4.4cm Cutout \/ 2.5cm Depth:\u003c\/strong\u003e Fits a wide range of OEM locations — A-pillars, sail panels, dash corners, and door panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0-Ohm Impedance:\u003c\/strong\u003e Matches seamlessly with JBL Club Series woofers and component systems for consistent impedance loading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Serviceability:\u003c\/strong\u003e Designed for straightforward installation and removal — spend less time on the install, more time on the music.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Recommendations\u003c\/h2\u003e\n\u003cp\u003eFor the best soundstage imaging, mount the Club 194T in the A-pillar or sail panel using the I-Mount™ hardware, and use the ±40-degree angle adjustment to aim the tweeter directly toward the driver or passenger seat. If mounting behind a factory grille, use the Starfish™ adapter with the appropriate break-off tabs for your location. Pair with a high-pass filter or crossover set at 3–4kHz to protect the tweeter from low-frequency content. If running as part of a component system, use the included passive crossover from your woofer kit. Use 18-gauge or heavier wire for tweeter runs.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub 194T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eComponent Tweeter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e50W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e150W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e92dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e3kHz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout Diameter\u003c\/td\u003e\n\u003ctd\u003e4.4 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Depth\u003c\/td\u003e\n\u003ctd\u003e2.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAngle Adjustment\u003c\/td\u003e\n\u003ctd\u003e±40 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Hardware\u003c\/td\u003e\n\u003ctd\u003eStarfish™ Adapter, I-Mount™ Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do the Club 194T tweeters work with the JBL Club 64C or Club 64CSQ component systems?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the Club 194T shares the same 3.0-ohm impedance as the Club Series woofers and is designed to integrate seamlessly with JBL Club Series component systems. They also work as a standalone add-on to any existing coaxial or factory setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What crossover point should I use with the Club 194T?\u003c\/strong\u003e\u003cbr\u003eA: Set your high-pass crossover at 3–4kHz to protect the tweeter from low-frequency content. If running with a JBL Club Series component system, the included passive crossover handles this automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I mount the Club 194T without cutting into my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: In most cases, yes. The Starfish™ adapter with break-off tabs is designed to fit behind factory grilles and OEM locations without cutting. The I-Mount™ kit provides surface and flush mounting options for locations where a factory grille isn't available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the maximum angle adjustment on the I-Mount™ kit?\u003c\/strong\u003e\u003cbr\u003eA: The I-Mount™ kit allows up to ±40 degrees of angle adjustment, giving you significant flexibility to aim the tweeter's dispersion axis directly toward the driver or passenger seat for optimal soundstage imaging.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698238619715,"sku":"JBLSPKCB194T","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_CLUB_194T_HERO_43407_x1_620ad7c1-ba6a-493c-9c7c-562e54d03478.png?v=1787255952"},{"product_id":"jbl-stage3-68cf-6-1-2-two-way-component-speakers","title":"JBL Stage3 68CF 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage3 68CF 6.5\" 2-Way Component Speaker System\u003c\/strong\u003e delivers 95W RMS \/ 760W peak power at a True 4-ohm nominal impedance, bringing Stage3 Series glass-fiber engineering to a component format. If you want the soundstage imaging of a component system with the head-unit-friendly True 4-ohm design of the Stage3 lineup, the 68CF is the move.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e with a \u003cstrong\u003e10% glass-fiber reinforced cone\u003c\/strong\u003e — the added rigidity reduces unwanted flex for tighter, more accurate bass reproduction with deeper extension down to 55Hz. The Plus One™ design increases effective cone area beyond a standard 6.5\" driver for more bass output and musical body without upsizing. Sensitivity reaches 91dB at 2.83V, and the \u003cstrong\u003eTrue 4-ohm impedance\u003c\/strong\u003e is optimized to extract maximum clean power from both factory head units and aftermarket amplifiers. The separate \u003cstrong\u003eedge-driven silk dome tweeter\u003c\/strong\u003e delivers smooth, fatigue-free high-frequency reproduction without harshness — and because it's a component system, you can mount it in the A-pillar or sail panel for precise soundstage imaging that a coaxial simply can't achieve. Frequency response spans 55Hz to 20kHz for full musical coverage. Built with \u003cstrong\u003eeco-friendly post-consumer recycled plastics and PVC-free wiring\u003c\/strong\u003e — premium sound with a reduced environmental footprint. A passive crossover network is included for plug-and-play installation.\u003c\/p\u003e\n\n\u003cp\u003ePair with a 4-channel amplifier rated 50–100W RMS per channel for the best results, or run directly off a quality head unit — the True 4-ohm design and 91dB sensitivity make these a strong performer in head-unit-only setups. Mount the woofer in the factory door location and position the tweeter in the A-pillar or sail panel for optimal soundstage imaging. Ideal for listeners who want component-level imaging with the simplicity of a True 4-ohm design.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage3 68CF?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Plus One™ Cone:\u003c\/strong\u003e 10% glass-fiber reinforcement delivers tighter bass and more accurate midrange than standard polypropylene — in a component format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Impedance:\u003c\/strong\u003e Optimized for maximum clean power transfer from factory head units and aftermarket amplifiers — no impedance mismatch, no wasted watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Silk Dome Tweeter:\u003c\/strong\u003e Mount in the A-pillar or sail panel for precise soundstage imaging that a coaxial speaker can't achieve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91dB Sensitivity:\u003c\/strong\u003e High-efficiency design delivers strong output from both head units and amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95W RMS \/ 760W Peak Power Handling:\u003c\/strong\u003e Serious headroom for real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55Hz – 20kHz Frequency Response:\u003c\/strong\u003e Full musical bandwidth from punchy bass to crisp high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover Included:\u003c\/strong\u003e Plug-and-play out of the box — no external crossover hardware required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-Friendly Construction:\u003c\/strong\u003e Post-consumer recycled plastics and PVC-free wiring — premium performance with a lighter environmental footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Stage3 68CF's True 4-ohm impedance and 91dB sensitivity make it a strong performer off a factory head unit. For the best performance, pair with a 4-channel amp rated 50–100W RMS per channel at 4 ohms. Mount the woofer in the factory door location, and position the tweeter in the A-pillar or sail panel for optimal soundstage imaging — the separate tweeter placement is the key advantage of a component system over a coaxial. The included passive crossover handles the tweeter\/woofer frequency split automatically. Use 16-gauge or heavier speaker wire for runs over 6 feet.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE3 68CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Component System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Size\u003c\/td\u003e\n\u003ctd\u003e6.5\" (165mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e95W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e760W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e91dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e55Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (True 4-Ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass-Fiber Reinforced (10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003eEdge-Driven Silk Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003ePassive Crossover Network, Mounting Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePost-Consumer Recycled Plastics, PVC-Free Wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Stage3 68CF and the Stage3 68C?\u003c\/strong\u003e\u003cbr\u003eA: Both are 6.5\" 2-way component systems sharing the same True 4-ohm design, power handling, and sensitivity specs. The 68CF uses a glass-fiber reinforced Plus One™ cone for added rigidity and tighter bass, while the 68C uses a standard polypropylene Plus One™ cone. The 68CF is the step-up model for listeners who want the extra cone rigidity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stage3 68CF off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the True 4-ohm impedance and 91dB sensitivity are designed to work well with factory head units. An external amplifier will unlock the full 95W RMS potential for even better dynamics and clarity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need a separate crossover?\u003c\/strong\u003e\u003cbr\u003eA: No — a passive crossover network is included in the box. For more precise active crossover control or time alignment, an amplifier with built-in crossover or a DSP processor will take the system further.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Where should I mount the tweeter?\u003c\/strong\u003e\u003cbr\u003eA: For the best soundstage imaging, mount the tweeter in the A-pillar or sail panel aimed toward the listening position. This is the key advantage of a component system over a coaxial — separate tweeter placement gives you a wider, more focused stereo image.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698238652483,"sku":"JBLSPKS368CF","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_3_CAR_AUDIO_68CF_HERO_0071_x1_34d16cdd-31ac-4b1f-bf5b-7bd70e8428cd.png?v=1787255938"},{"product_id":"jbl-stadium-862f","title":"JBL Stadium 862F 6x8\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stadium 862F 6x8\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 100W RMS \/ 300W peak power at a 3.0-ohm nominal impedance, bringing Stadium Series flagship engineering to a coaxial format. Glass-fiber Plus One™ woofer, high-resolution aluminum dome tweeter to 40kHz, UniPivot tweeter mount, and push-button level control — this is the Stadium Series experience without the component install complexity.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ glass-fiber cone architecture\u003c\/strong\u003e — glass-fiber reinforcement adds rigidity and reduces unwanted flex for tighter, more accurate bass reproduction with deeper extension down to 40Hz. The Plus One™ design increases effective cone area beyond a standard 6x8\" driver for more bass output and musical body. Sensitivity reaches 93dB at 2.83V for exceptional output efficiency. The integrated \u003cstrong\u003ehigh-resolution aluminum dome tweeter\u003c\/strong\u003e extends all the way to 40kHz, resolving ultra-fine detail in hi-res audio files that standard textile dome tweeters simply can't reproduce. The \u003cstrong\u003eUniPivot tweeter mount\u003c\/strong\u003e lets you aim the tweeter's dispersion axis toward the listening position even after installation — a rare feature in a coaxial design. A \u003cstrong\u003epush-button 0dB \/ -3dB tweeter level control\u003c\/strong\u003e lets you tune the high-frequency balance to your vehicle's acoustics with a single click. Frequency response spans 40Hz to 40kHz for extraordinary full-range coverage. Installation hardware and spacers are included for a clean, complete install.\u003c\/p\u003e\n\n\u003cp\u003ePair with a 4-channel amplifier rated 60–120W RMS per channel, stable at 2–4 ohms. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker, so choose an amp with adequate headroom. Mount in the factory 6x8\" location using the included hardware and spacers. Use the UniPivot mount to aim the tweeter toward the driver or passenger seat for the best soundstage. Ideal for hi-res audio listeners and enthusiasts who want Stadium Series performance in a plug-and-play coaxial format.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stadium 862F?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Glass-Fiber Cone:\u003c\/strong\u003e Rigid glass-fiber construction delivers tighter bass and more accurate midrange than polypropylene — deeper extension down to 40Hz in a 6x8\" coaxial.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome Tweeter to 40kHz:\u003c\/strong\u003e Resolves ultra-fine detail from hi-res audio sources — airy, extended highs that standard tweeters can't match.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniPivot Tweeter Mount:\u003c\/strong\u003e Aim the tweeter toward the listening position for focused soundstage imaging — a rare feature in a coaxial speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-Button Tweeter Level (0dB \/ -3dB):\u003c\/strong\u003e One-click high-frequency tuning — no tools, no crossover box required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e93dB Sensitivity:\u003c\/strong\u003e Exceptional efficiency — more output per watt, more dynamic headroom from your amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS \/ 300W Peak Power Handling:\u003c\/strong\u003e Built for high-powered amplifier setups without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40Hz – 40kHz Frequency Response:\u003c\/strong\u003e Extraordinary bandwidth — from deep bass extension to ultra-high-frequency detail well beyond standard speaker range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware \u0026amp; Spacers Included:\u003c\/strong\u003e Everything needed for a clean, professional install right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003ePair the Stadium 862F with a 4-channel amplifier rated 60–120W RMS per channel, stable at 2–4 ohms. The 3.0-ohm impedance draws more current than a 4-ohm speaker — choose an amp with headroom. Mount in the factory 6x8\" location using the included hardware and spacers. Use the UniPivot mount to aim the tweeter toward the driver or passenger seat for the best soundstage imaging. Use 14-gauge or heavier speaker wire for runs over 6 feet. A DSP processor with time alignment will further enhance the imaging and staging these speakers are capable of.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTADIUM 862F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e6x8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e93dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e40Hz – 40kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass Fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003eHigh-Resolution Aluminum Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Mount\u003c\/td\u003e\n\u003ctd\u003eUniPivot (Adjustable Aim)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Level Control\u003c\/td\u003e\n\u003ctd\u003e0dB \/ -3dB Push-Button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eInstallation Hardware, Spacers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e2.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What makes the Stadium 862F different from a standard coaxial speaker?\u003c\/strong\u003e\u003cbr\u003eA: The 862F brings Stadium Series flagship features to a coaxial format — glass-fiber Plus One™ cone, aluminum dome tweeter extending to 40kHz, UniPivot adjustable tweeter mount, and push-button level control. Most coaxials at this price point offer none of these. It's a component-level experience in a drop-in coaxial package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Stadium 862F?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 60–120W RMS per channel, stable at 2–4 ohms, is ideal. The 3.0-ohm impedance draws more current than a 4-ohm speaker — choose an amp with headroom. A DSP processor will further enhance imaging and staging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stadium 862F off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: You can, and the 93dB sensitivity will give you solid output. However, to fully unlock the 100W RMS capability and the dynamic range these speakers are capable of, an external amplifier is strongly recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Stadium 862F fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: The 862F is designed for standard 6x8\" OEM locations. Contact us at Trinity Car Audio with your vehicle's year, make, and model to confirm fitment and spacer requirements.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698238816323,"sku":"JBLSPKSD862FAM","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/Stadium_862F_3quart_HERO.png?v=1787255966"},{"product_id":"jbl-stage3-58f-5-1-4-coaxial-car-speakers","title":"JBL Stage3 58F 5.25\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage3 58F 5.25\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 60W RMS \/ 480W peak power at a True 4-ohm nominal impedance, bringing Stage3 Series engineering to the popular 5.25\" format. A glass-fiber reinforced Plus One™ cone, PEI balanced dome tweeter, and eco-conscious construction — this is everything your factory 5.25\" speakers aren't.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e with a \u003cstrong\u003e10% glass-fiber reinforced polypropylene cone\u003c\/strong\u003e — the added rigidity reduces unwanted flex for tighter, more accurate bass reproduction with deeper extension down to 55Hz. The Plus One™ design increases effective cone area beyond a standard 5.25\" driver for more bass output and musical body without upsizing. Sensitivity reaches 89dB at 2.83V, and the \u003cstrong\u003eTrue 4-ohm impedance\u003c\/strong\u003e is optimized to extract maximum clean power from both factory head units and aftermarket amplifiers. The integrated \u003cstrong\u003ePEI balanced dome tweeter\u003c\/strong\u003e delivers smooth, detailed high-frequency reproduction that spreads evenly throughout the cabin without harshness or fatigue. Frequency response spans 55Hz to 20kHz for full musical coverage. Built with \u003cstrong\u003epost-consumer recycled plastics and PVC-free wiring\u003c\/strong\u003e — premium sound with a reduced environmental footprint.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a true drop-in for most vehicles with factory 5.25\" locations. Pair with a 4-channel amplifier rated 40–75W RMS per channel for the best results, or run directly off a quality head unit — the True 4-ohm design and 89dB sensitivity make these a solid performer in head-unit-only setups. Ideal for everyday listening across all genres where you want noticeably better sound without a complex install.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage3 58F?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Plus One™ Cone:\u003c\/strong\u003e 10% glass-fiber reinforcement delivers tighter bass and more accurate midrange than standard polypropylene — in a 5.25\" package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Impedance:\u003c\/strong\u003e Optimized for maximum clean power transfer from factory head units and aftermarket amplifiers — no impedance mismatch, no wasted watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Smooth, detailed high-frequency reproduction that spreads evenly throughout the cabin without harshness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e89dB Sensitivity:\u003c\/strong\u003e Efficient design delivers solid output from both head units and amplifiers — a meaningful upgrade even without an external amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS \/ 480W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55Hz – 20kHz Frequency Response:\u003c\/strong\u003e Full musical bandwidth from punchy bass to crisp high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Drop-In Fit:\u003c\/strong\u003e Designed for standard 5.25\" OEM locations — no cutting or fabrication required in most vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-Friendly Construction:\u003c\/strong\u003e Post-consumer recycled plastics and PVC-free wiring — premium performance with a lighter environmental footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Stage3 58F's True 4-ohm impedance and 89dB sensitivity make it a strong performer off a factory head unit — you'll hear a clear improvement over OEM speakers right out of the box. For the best performance, pair with a 4-channel amp rated 40–75W RMS per channel at 4 ohms. Mount in the factory 5.25\" location — no cutting or fabrication required in most vehicles. Use 16-gauge or heavier speaker wire for runs over 6 feet to minimize resistance losses.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE3 58F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e5.25\" (130mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e60W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e480W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e89dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e55Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (True 4-Ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass-Fiber Reinforced Polypropylene (10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003ePEI Balanced Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePost-Consumer Recycled Plastics, PVC-Free Wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stage3 58F off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the True 4-ohm impedance and 89dB sensitivity are designed to work well with factory head units. You'll hear a clear improvement over OEM speakers immediately. An external amplifier will unlock the full 60W RMS potential for even better dynamics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Stage3 58F?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 40–75W RMS per channel at 4 ohms is ideal. The True 4-ohm design ensures clean, efficient power transfer without impedance mismatch issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Stage3 58F differ from the Stage3 648F?\u003c\/strong\u003e\u003cbr\u003eA: The 58F is a 5.25\" speaker designed for vehicles with smaller OEM door or dash locations, while the 648F is a 4x6\" oval format. Both share the same Plus One™ glass-fiber cone, PEI dome tweeter, True 4-ohm design, and power handling specs. Choose based on your vehicle's OEM speaker size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Stage3 58F fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: The 58F is designed for standard 5.25\" OEM locations. Contact us at Trinity Car Audio with your vehicle's year, make, and model to confirm fitment before ordering.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698238914627,"sku":"JBLSPKS358F","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_3_CAR_AUDIO_58F_HERO_0036_x1_1f5025cb-d3b9-452f-ad26-25305da223d1.png?v=1787255973"},{"product_id":"jbl-stadium-62cf","title":"JBL Stadium 62CF 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stadium 62CF 6.5\" 2-Way Component Speaker System\u003c\/strong\u003e delivers 110W RMS \/ 330W peak power at a 3.0-ohm nominal impedance, sitting at the top of JBL's Stadium Series lineup alongside the 962CF. With an aluminum dome tweeter that extends to 40kHz, a glass-fiber Plus One™ woofer reaching down to 45Hz, and a 3-way upgradeable crossover network, the Stadium 62CF is engineered for the audiophile who wants reference-level component sound in a 6.5\" format.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ glass-fiber cone architecture\u003c\/strong\u003e — glass-fiber reinforcement adds rigidity and reduces unwanted flex compared to polypropylene, delivering tighter, more accurate bass reproduction with deeper extension down to 45Hz. The Plus One™ design increases effective cone area beyond a standard 6.5\" driver for more bass output and musical body without upsizing. Sensitivity reaches 93dB at 2.83V for exceptional output efficiency. The \u003cstrong\u003eedge-driven aluminum dome tweeter\u003c\/strong\u003e extends all the way to 40kHz, resolving ultra-fine detail in hi-res audio files that standard silk dome tweeters simply can't reproduce. A \u003cstrong\u003epush-button 0dB \/ -3dB tweeter output level control\u003c\/strong\u003e on the slim crossover network lets you tune the high-frequency balance to your vehicle's acoustics with a single click. The crossover is designed with a slim profile for easy concealment in tight door cavities, and the system is fully \u003cstrong\u003e3-way upgradeable\u003c\/strong\u003e — add a dedicated midrange driver later without replacing the woofer or tweeter. Each kit includes mounting cups, adapter rings, and all hardware for a complete, clean install.\u003c\/p\u003e\n\n\u003cp\u003ePair the Stadium 62CF with a 4-channel amplifier rated 75–150W RMS per channel, stable at 2–4 ohms. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker, so choose an amp with adequate headroom. A DSP processor with time alignment and active crossover capability will take this system to reference-level performance. Mount the woofer in the factory door location, and position the tweeter in the A-pillar or sail panel for optimal soundstage imaging. Ideal for audiophiles, hi-res audio listeners, and anyone who demands the absolute best from a 6.5\" component system.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stadium 62CF?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Glass-Fiber Cone:\u003c\/strong\u003e Rigid glass-fiber construction delivers tighter bass, more accurate midrange, and deeper extension than polypropylene — down to 45Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome Tweeter to 40kHz:\u003c\/strong\u003e Resolves ultra-fine detail from hi-res audio sources that silk dome tweeters can't reproduce — airy, extended, fatigue-free highs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e93dB Sensitivity:\u003c\/strong\u003e Exceptional efficiency — more output per watt, less strain on your amplifier, more dynamic headroom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110W RMS \/ 330W Peak Power Handling:\u003c\/strong\u003e Built for high-powered amplifier setups without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-Button Tweeter Level Control (0dB \/ -3dB):\u003c\/strong\u003e One-click high-frequency tuning built into the slim crossover — no tools required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Upgradeable Crossover:\u003c\/strong\u003e Add a dedicated midrange driver later for an even more refined, full-range system without replacing any existing components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim Crossover Design:\u003c\/strong\u003e Low-profile crossover network fits easily in tight door cavities for a clean, hidden install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Hardware Kit:\u003c\/strong\u003e Mounting cups, adapter rings, and all hardware included — everything you need for a professional install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eFor the best performance, pair the Stadium 62CF with a 4-channel amplifier rated 75–150W RMS per channel, stable at 2–4 ohms. The 3.0-ohm impedance draws more current than a 4-ohm speaker — don't underpower these. A DSP processor with time alignment and active crossover capability will unlock reference-level performance. Mount the woofer in the factory door location using the included mounting cups and adapter rings, and position the tweeter in the A-pillar or sail panel. Use 14-gauge or heavier speaker wire for runs over 6 feet. The included slim crossover handles the tweeter\/woofer frequency split — or bypass it with an active crossover for maximum control. If you plan to go 3-way, add a dedicated midrange driver and configure your DSP or active crossover accordingly.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTADIUM 62CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Component System (3-Way Upgradeable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Size\u003c\/td\u003e\n\u003ctd\u003e6.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e110W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e330W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e93dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e45Hz – 40kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass Fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003eEdge-Driven Aluminum Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Level Control\u003c\/td\u003e\n\u003ctd\u003e0dB \/ -3dB Push-Button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrossover Profile\u003c\/td\u003e\n\u003ctd\u003eSlim, 3-Way Upgradeable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eMounting Cups, Adapter Rings, Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e3.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Stadium 62CF and the Stadium 962CF?\u003c\/strong\u003e\u003cbr\u003eA: Both are top-tier Stadium Series component systems sharing the same glass-fiber Plus One™ woofer technology and aluminum dome tweeter. The 962CF adds a UniPivot adjustable tweeter mount for more precise aiming, while the 62CF uses a push-button tweeter level control on the crossover. Both are 3-way upgradeable. Choose the 962CF if tweeter aiming flexibility is a priority; the 62CF if you prefer the push-button crossover control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Stadium 62CF?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 75–150W RMS per channel, stable at 2–4 ohms, is the sweet spot. The 3.0-ohm impedance draws more current than a 4-ohm speaker — choose an amp with headroom. A DSP processor for time alignment and active crossover control will take the system to reference level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What does \"3-way upgradeable\" mean?\u003c\/strong\u003e\u003cbr\u003eA: The Stadium 62CF's crossover network is designed to accommodate a dedicated midrange driver in addition to the woofer and tweeter. You can add a midrange speaker later for even more refined vocal and instrument reproduction without replacing the woofer or tweeter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why does the tweeter extend to 40kHz?\u003c\/strong\u003e\u003cbr\u003eA: Hi-res audio formats contain content above the standard 20kHz hearing threshold. Extended high-frequency response ensures the tweeter operates well within its linear range at 20kHz — reducing distortion where it matters most and contributing to a more natural, airy sound character.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698239111235,"sku":"JBLSPKSD62CFAM","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/Stadium_62CF_3quart_Front_HERO.png?v=1787255973"},{"product_id":"jbl-stage3-648f-4x6-coaxial-car-speakers","title":"JBL Stage3 648F 4x6\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage3 648F 4x6\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 60W RMS \/ 480W peak power at a True 4-ohm nominal impedance, bringing JBL's Stage3 Series engineering to one of the most common OEM speaker sizes on the road. If your factory 4x6\" speakers are holding your system back, the Stage3 648F is the drop-in upgrade that changes everything.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e with a \u003cstrong\u003e10% glass-fiber reinforced polypropylene cone\u003c\/strong\u003e — the glass-fiber infusion adds rigidity and reduces unwanted flex for tighter, more accurate bass reproduction with deeper extension down to 50Hz. The Plus One™ design increases effective cone area beyond a standard 4x6\" driver for more bass output and musical body without upsizing. Sensitivity reaches 89dB at 2.83V, and the \u003cstrong\u003eTrue 4-ohm impedance\u003c\/strong\u003e is optimized to extract maximum clean power from both factory head units and aftermarket amplifiers. The integrated \u003cstrong\u003ePEI balanced dome tweeter\u003c\/strong\u003e handles the high-frequency spectrum with smooth, detailed reproduction — spreading crisp highs evenly throughout the cabin without harshness. Frequency response spans 50Hz to 20kHz for full musical coverage. The Stage3 648F is also built with \u003cstrong\u003eeco-friendly recycled plastics, PVC-free wiring, and soy-ink packaging\u003c\/strong\u003e — premium sound with a reduced environmental footprint.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a true drop-in for most vehicles with factory 4x6\" locations — no cutting, no fabrication. Pair with a 4-channel amplifier rated 40–75W RMS per channel for the best results, or run directly off a quality head unit. The True 4-ohm design and 89dB sensitivity make these a solid performer in head-unit-only setups. Ideal for everyday listening across rock, pop, R\u0026amp;B, and country where you want noticeably better sound without a complex install. Note: grilles are not included.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage3 648F?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Plus One™ Cone:\u003c\/strong\u003e 10% glass-fiber reinforcement delivers tighter bass and more accurate midrange than standard polypropylene — in a 4x6\" package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Impedance:\u003c\/strong\u003e Optimized for maximum clean power transfer from factory head units and aftermarket amplifiers — no impedance mismatch, no wasted watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Smooth, detailed high-frequency reproduction that spreads evenly throughout the cabin without harshness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e89dB Sensitivity:\u003c\/strong\u003e Efficient design delivers solid output from both head units and amplifiers — a meaningful upgrade even without an external amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS \/ 480W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50Hz – 20kHz Frequency Response:\u003c\/strong\u003e Full musical bandwidth from punchy bass to crisp high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Drop-In Fit:\u003c\/strong\u003e Designed for standard 4x6\" OEM locations — no cutting or fabrication required in most vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-Friendly Construction:\u003c\/strong\u003e Recycled plastics, PVC-free wiring, and soy-ink packaging — premium performance with a lighter environmental footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Stage3 648F's True 4-ohm impedance and 89dB sensitivity make it a strong performer off a factory head unit — you'll hear a noticeable improvement over OEM speakers right out of the box. For the best performance, pair with a 4-channel amp rated 40–75W RMS per channel at 4 ohms. Mount in the factory 4x6\" location — no cutting or fabrication required in most vehicles. Use 16-gauge or heavier speaker wire for runs over 6 feet. Note: grilles are not included — use your factory grilles or source compatible aftermarket 4x6\" grilles separately.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE3 648F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e4x6\" (100x152mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e60W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e480W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e89dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e50Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (True 4-Ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass-Fiber Reinforced Polypropylene (10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003ePEI Balanced Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrilles Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eRecycled Plastics, PVC-Free Wiring, Soy-Ink Packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stage3 648F off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the True 4-ohm impedance and 89dB sensitivity are designed to work well with factory head units. You'll hear a clear improvement over OEM speakers immediately. An external amplifier will unlock the full 60W RMS potential for even better dynamics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Stage3 648F?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 40–75W RMS per channel at 4 ohms is ideal. The True 4-ohm design ensures clean, efficient power transfer without impedance mismatch issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do grilles come included?\u003c\/strong\u003e\u003cbr\u003eA: No — grilles are not included. Use your factory 4x6\" grilles or source compatible aftermarket grilles separately. Contact us at Trinity Car Audio if you need help finding a match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Stage3 648F fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: The 648F is designed for standard 4x6\" OEM locations. Contact us at Trinity Car Audio with your vehicle's year, make, and model to confirm fitment before ordering.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698239242307,"sku":"JBLSPKS3648F","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_3_GEN2_CAR_AUDIO_648F_HERO_0109_x1_d229e8f5-2ea4-4b26-b9c5-b40ca2b920e6.png?v=1787256021"},{"product_id":"jbl-stage3-968mf-6x9-three-way-car-speakers","title":"JBL Stage3 968MF 6x9\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stage3 968MF 6x9\" 3-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 80W RMS \/ 640W peak power at a True 4-ohm nominal impedance, bringing JBL's Stage3 Series engineering to the classic 6x9\" format. Three-way design, glass-fiber reinforced cone, and a PEI dome tweeter — this is a serious step up from anything that came out of your factory door panels.\u003c\/p\u003e\n\n\u003cp\u003eThe foundation is a 6x9\" (152x230mm) woofer built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e with a \u003cstrong\u003e10% glass-fiber reinforced cone\u003c\/strong\u003e — the added rigidity reduces unwanted flex for tighter, more accurate bass reproduction with deeper extension down to 40Hz. The Plus One™ design increases effective cone area beyond a standard 6x9\" driver for more bass output and musical body. Sensitivity reaches 92dB at 2.83V, and the \u003cstrong\u003eTrue 4-ohm impedance\u003c\/strong\u003e is optimized to extract maximum clean power from both factory head units and aftermarket amplifiers. The three-way design adds a dedicated \u003cstrong\u003ePEI balanced dome midrange\u003c\/strong\u003e and tweeter array, delivering smoother vocal reproduction and more refined high-frequency detail than a standard 2-way coaxial can achieve. Frequency response spans 40Hz to 20kHz for full musical coverage. Like all Stage3 Series speakers, the 968MF is built with \u003cstrong\u003eeco-friendly recycled plastics and PVC-free wiring\u003c\/strong\u003e — premium sound with a reduced environmental footprint.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a straightforward drop-in for most vehicles with a standard 6x9\" rear deck or door location. Pair with a 4-channel amplifier rated 50–100W RMS per channel for the best results, or run directly off a quality head unit — the True 4-ohm design and 92dB sensitivity make these one of the most head-unit-friendly 6x9\" speakers in the JBL lineup. Ideal for R\u0026amp;B, hip-hop, rock, and pop where bass punch, vocal clarity, and overall fullness matter most.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stage3 968MF?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Dedicated midrange and tweeter elements deliver smoother vocal reproduction and more refined highs than a standard 2-way coaxial.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Plus One™ Cone:\u003c\/strong\u003e 10% glass-fiber reinforcement adds rigidity for tighter bass and more accurate midrange — deeper extension down to 40Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Impedance:\u003c\/strong\u003e Optimized for maximum clean power transfer from factory head units and aftermarket amplifiers — no impedance mismatch, no wasted watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Smooth, detailed high-frequency reproduction without harshness — even at high listening volumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92dB Sensitivity:\u003c\/strong\u003e High-efficiency design delivers strong output per watt — ideal for head-unit-only installs or low-powered amp setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS \/ 640W Peak Power Handling:\u003c\/strong\u003e Serious headroom for real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40Hz – 20kHz Frequency Response:\u003c\/strong\u003e Full musical bandwidth from deep bass punch to crisp high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-Friendly Construction:\u003c\/strong\u003e Recycled plastics and PVC-free wiring — premium performance with a lighter environmental footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe Stage3 968MF's True 4-ohm impedance and 92dB sensitivity make it one of the most versatile 6x9\" speakers available — equally capable off a factory head unit or a dedicated amplifier. For the best performance, pair with a 4-channel amp rated 50–100W RMS per channel at 4 ohms. Mount in the factory 6x9\" rear deck or door location — no cutting or fabrication required in most vehicles. Use 16-gauge or heavier speaker wire for runs over 6 feet to minimize resistance losses. Note: grilles are not included — use your factory grilles or source aftermarket 6x9\" grilles separately.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE3 968MF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e3-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Size\u003c\/td\u003e\n\u003ctd\u003e6x9\" (152x230mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e640W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e92dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e40Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (True 4-Ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass-Fiber Reinforced (10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003ePEI Balanced Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrilles Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eRecycled Plastics, PVC-Free Wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Stage3 968MF off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the True 4-ohm impedance and 92dB sensitivity are specifically designed to work well with factory head units. You'll hear a significant improvement over OEM speakers immediately. An external amplifier will unlock the full 80W RMS potential for even better dynamics and clarity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Stage3 968MF?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 50–100W RMS per channel at 4 ohms is ideal. The True 4-ohm design ensures clean, efficient power transfer without the impedance mismatch issues common with 3-ohm speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do grilles come included?\u003c\/strong\u003e\u003cbr\u003eA: No — grilles are not included with the Stage3 968MF. Use your factory 6x9\" grilles or source compatible aftermarket grilles separately. Contact us at Trinity Car Audio if you need help finding a match for your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Stage3 968MF fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: The 968MF is designed for standard 6x9\" locations (rear deck or doors). Contact us at Trinity Car Audio with your vehicle's year, make, and model to confirm fitment before ordering.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698239307843,"sku":"JBLSPKS3968MF","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_3_CAR_AUDIO_968MF_HERO_0128_x1_04368624-55de-481e-b748-5d9466c17dbe.png?v=1787256018"},{"product_id":"jbl-club-64-2-way-car-audio-speakers","title":"JBL Club 64 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club 64 6.5\" 2-Way Coaxial Car Speakers\u003c\/strong\u003e deliver 60W RMS \/ 180W peak power at a 3.0-ohm nominal impedance, bringing JBL's Club Series engineering to a plug-and-play coaxial format. If you want a dramatic upgrade from factory sound without the complexity of a component install, the Club 64 drops straight into your OEM door location and immediately transforms your listening experience.\u003c\/p\u003e\n\n\u003cp\u003eThe woofer is built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e, which increases effective cone area beyond a standard 6.5\" driver — delivering deeper bass extension and more musical body without upsizing. The cone is molded from \u003cstrong\u003eacoustically damped, UV-resistant polypropylene\u003c\/strong\u003e, engineered to handle the heat cycles, humidity, and UV exposure of real-world in-car environments without warping or degrading over time. Sensitivity reaches 93dB at 2.83V, giving you strong, efficient output whether you're running a factory head unit or an aftermarket amplifier. The integrated \u003cstrong\u003eedge-driven silk dome tweeter\u003c\/strong\u003e handles the high-frequency spectrum with smooth, fatigue-free refinement, and its \u003cstrong\u003eadjustable output level\u003c\/strong\u003e lets you tune the treble balance to match your vehicle's acoustics. Frequency response spans 48Hz to 21kHz for full musical coverage from punchy kick drums to airy cymbal shimmer. Grilles, mounting rings, and all hardware are included for a clean, complete install.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is as straightforward as it gets — the Club 64 is designed to drop into standard 6.5\" OEM door locations with minimal modification. Pair with a 4-channel amplifier rated 40–80W RMS per channel for the best results, or run directly off a quality head unit for a clean plug-and-play upgrade. The 3.0-ohm impedance is compatible with both factory and aftermarket sources. Ideal for rock, pop, R\u0026amp;B, and everyday listening where you want noticeably better sound without a complex install.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club 64?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Cone Architecture:\u003c\/strong\u003e Increases effective cone area beyond a standard 6.5\" driver for deeper bass and more musical body — in a coaxial package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Acoustically damped and built to survive the heat, humidity, and UV exposure of real-world in-car environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e93dB Sensitivity:\u003c\/strong\u003e High-efficiency design delivers strong output from both factory head units and aftermarket amplifiers — more volume per watt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Silk Dome Tweeter:\u003c\/strong\u003e Smooth, fatigue-free high-frequency reproduction with adjustable output level for treble tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48Hz – 21kHz Frequency Response:\u003c\/strong\u003e Full musical bandwidth from tight bass punch to airy high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS \/ 180W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Coaxial Design:\u003c\/strong\u003e Drops into standard 6.5\" OEM door locations — grilles, mounting rings, and hardware all included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0-Ohm Impedance:\u003c\/strong\u003e Compatible with factory head units and aftermarket amplifiers for maximum install flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eFor the best performance, pair the Club 64 with a 4-channel amplifier rated 40–80W RMS per channel. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker, so choose an amp rated stable at 2–4 ohms. If running off a factory head unit, the 93dB sensitivity ensures solid output at everyday listening volumes — and you'll notice a significant improvement over OEM speakers right out of the box. Mount in the factory door location using the included mounting rings and hardware. Use 16-gauge or heavier speaker wire for runs over 6 feet to minimize resistance losses.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCLUB64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Size\u003c\/td\u003e\n\u003ctd\u003e6.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e60W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e180W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e93dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e48Hz – 21kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003eUV-Resistant Polypropylene (Plus One™ Architecture)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003eEdge-Driven Silk Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Output\u003c\/td\u003e\n\u003ctd\u003eAdjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eGrilles, Mounting Rings, Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the JBL Club 64 and the Club 64C?\u003c\/strong\u003e\u003cbr\u003eA: The Club 64 is a coaxial speaker — the tweeter is mounted in the center of the woofer for a simple, single-hole install. The Club 64C is a component system with a separate tweeter and crossover network, giving you more flexibility in tweeter placement and better soundstage imaging. The Club 64 is the easier install; the Club 64C delivers more precise stereo imaging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Club 64 off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the 93dB sensitivity and 3.0-ohm impedance work well with factory head units. You'll hear a noticeable improvement over OEM speakers immediately. Adding an external amplifier will unlock the full 60W RMS potential and significantly improve dynamics and clarity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Club 64?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 40–80W RMS per channel, stable at 2–4 ohms, is ideal. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker, so choose an amp with a bit of headroom.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Club 64 fit my vehicle without cutting or fabricating?\u003c\/strong\u003e\u003cbr\u003eA: In most cases, yes — the Club 64 is designed for standard 6.5\" OEM door locations and includes mounting rings and hardware. Contact us at Trinity Car Audio with your vehicle's year, make, and model to confirm fitment.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698239373379,"sku":"JBLSPKCB64","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_CLUB_64_HERO_43845_X1_9ad7400c-148c-4b5f-9ce2-56646d6a8bfd.png?v=1787256028"},{"product_id":"jbl-stadium-962cf","title":"JBL Stadium 962CF 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Stadium 962CF 6.5\" 2-Way Component Speaker System\u003c\/strong\u003e delivers 145W RMS \/ 435W peak power at a 3.0-ohm nominal impedance, representing the pinnacle of JBL's Stadium Series engineering. With an extended frequency response of 35Hz to 40kHz — well beyond the range of human hearing — and a high-resolution aluminum dome tweeter capable of resolving ultra-fine detail, the 962CF is built for the serious enthusiast who demands concert-hall accuracy from their car audio system.\u003c\/p\u003e\n\n\u003cp\u003eThe foundation is a 6.5\" woofer built on JBL's patented \u003cstrong\u003ePlus One™ glass-fiber cone architecture\u003c\/strong\u003e — glass-fiber reinforcement adds rigidity and reduces unwanted flex compared to polypropylene, delivering tighter, more accurate bass reproduction with deeper extension down to 35Hz. The Plus One™ design increases effective cone area beyond a standard 6.5\" driver for more bass output and musical body without upsizing. Sensitivity reaches 94dB at 2.83V, meaning your amplifier gets exceptional output per watt. The \u003cstrong\u003ehigh-resolution aluminum dome tweeter\u003c\/strong\u003e extends all the way to 40kHz, resolving detail in hi-res audio files that standard silk dome tweeters simply can't reproduce. A \u003cstrong\u003eswitchable 0dB \/ -3dB tweeter output level control\u003c\/strong\u003e lets you tune the high-frequency balance to your vehicle's acoustics. The \u003cstrong\u003eUniPivot tweeter mount\u003c\/strong\u003e allows precise aiming of the tweeter's dispersion axis toward the listening position — a critical advantage for accurate stereo imaging. The slim-profile crossover network is designed for easy concealment in tight door cavities, and the system is 3-way upgradeable if you want to add a midrange driver down the road.\u003c\/p\u003e\n\n\u003cp\u003ePair the 962CF with a 4-channel amplifier rated 100–150W RMS per channel for optimal performance. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker, so choose an amp rated stable at 2–4 ohms with adequate headroom. Mount the woofer in the factory door location, and use the UniPivot tweeter mount in the A-pillar or sail panel — pivot it precisely toward the driver or passenger seat for the best soundstage. Ideal for audiophiles, hi-res audio listeners, and anyone who wants the absolute best component sound in their vehicle. Pairs beautifully with a DSP processor for time alignment and active crossover control.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Stadium 962CF?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Glass-Fiber Cone:\u003c\/strong\u003e Rigid glass-fiber construction delivers tighter bass, more accurate midrange, and deeper extension than polypropylene — down to 35Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Resolution Aluminum Dome Tweeter:\u003c\/strong\u003e Extends to 40kHz for ultra-fine detail retrieval from hi-res audio sources that silk dome tweeters can't resolve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniPivot Tweeter Mount:\u003c\/strong\u003e Precisely aim the tweeter toward the listening position for accurate stereo imaging and a focused soundstage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94dB Sensitivity:\u003c\/strong\u003e Exceptional efficiency — more output per watt, less strain on your amplifier, more dynamic headroom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e145W RMS \/ 435W Peak Power Handling:\u003c\/strong\u003e Built for high-powered amplifier setups without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35Hz – 40kHz Frequency Response:\u003c\/strong\u003e Extraordinary bandwidth — from deep sub-bass extension to ultra-high-frequency detail well beyond standard speaker range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Upgradeable:\u003c\/strong\u003e Add a dedicated midrange driver later for an even more refined, full-range system without replacing the woofer or tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim Crossover Design:\u003c\/strong\u003e Low-profile crossover network fits easily in tight door cavities for a clean, hidden install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eFor the best performance, pair the Stadium 962CF with a 4-channel amplifier rated 100–150W RMS per channel, stable at 2–4 ohms. The 3.0-ohm impedance will draw slightly more power than a 4-ohm speaker, so headroom matters — don't underpower these. A DSP processor with time alignment and active crossover capability will take the system to reference-level performance. Mount the woofer in the factory door location, and position the UniPivot tweeter in the A-pillar or sail panel — pivot it precisely toward the driver or passenger seat. Use 14-gauge or heavier speaker wire for runs over 6 feet. The included slim crossover network handles the tweeter\/woofer frequency split — or bypass it entirely with an active crossover for maximum control.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTADIUM 962CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Component System (3-Way Upgradeable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Size\u003c\/td\u003e\n\u003ctd\u003e6.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e145W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e435W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e94dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e35Hz – 40kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003ePlus One™ Glass Fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003eHigh-Resolution Aluminum Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Level Control\u003c\/td\u003e\n\u003ctd\u003e0dB \/ -3dB Switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Mount\u003c\/td\u003e\n\u003ctd\u003eUniPivot (Adjustable Aim)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrossover Profile\u003c\/td\u003e\n\u003ctd\u003eSlim, Door-Cavity Friendly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e4.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the JBL Stadium 962CF?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 100–150W RMS per channel, stable at 2–4 ohms, is the sweet spot. The 3.0-ohm impedance draws more current than a 4-ohm speaker, so choose an amp with headroom. A DSP processor for time alignment and active crossover control will take the system to reference level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why does the tweeter go to 40kHz? Human hearing only goes to 20kHz.\u003c\/strong\u003e\u003cbr\u003eA: Hi-res audio formats (24-bit\/96kHz and above) contain content above 20kHz. While you can't consciously hear 40kHz, extended high-frequency response contributes to a more natural, airy sound character and ensures the tweeter is operating well within its linear range at 20kHz — reducing distortion where it matters most.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What does \"3-way upgradeable\" mean?\u003c\/strong\u003e\u003cbr\u003eA: The Stadium 962CF's crossover network is designed to accommodate a dedicated midrange driver in addition to the woofer and tweeter. If you want to add a midrange speaker later for even more refined vocal and instrument reproduction, you can do so without replacing the woofer or tweeter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Stadium 962CF fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: The 6.5\" woofer fits most standard OEM door locations. Contact us at Trinity Car Audio with your vehicle's year, make, and model and we'll confirm fitment and recommend the right mounting hardware for your specific application.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698239438915,"sku":"JBLSPKSD962CFAM","price":337.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/2_JBL_STADIUM_962C_SPEAKER_GRILL_1_FRONT_0274_x1_780b1dd4-88ac-41a9-932c-36276e57bfe5.png?v=1787256032"},{"product_id":"jbl-stage3-68c-two-way-component-car-speaker","title":"JBL STAGE3 68C Two-Way Component Car Speaker","description":"\u003cp\u003eThe \u003cstrong\u003eJBL STAGE3 68C Two-Way Component Car Speaker System\u003c\/strong\u003e delivers 95W RMS \/ 760W peak power at a true 4-ohm nominal impedance, engineered to extract maximum clean output from both factory head units and aftermarket amplifiers. If you want a genuine upgrade from OEM sound — deeper bass, smoother highs, and a wider soundstage — without the complexity of a high-end build, the STAGE3 68C is your answer.\u003c\/p\u003e\n\n\u003cp\u003eAt the core of the system is a 6.5\" (165mm) woofer built on JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e with a \u003cstrong\u003eglass-fiber infused cone\u003c\/strong\u003e — a step up from standard polypropylene that adds rigidity and reduces unwanted flex for tighter, more accurate bass reproduction. The Plus One™ design increases effective cone area beyond a standard 6.5\" driver, translating directly into deeper bass extension and more musical body. Sensitivity comes in at 91dB at 2.83V, and the \u003cstrong\u003eTrue 4-ohm impedance\u003c\/strong\u003e is optimized to pull every watt of clean power from your source unit. The \u003cstrong\u003eedge-driven silk dome tweeter\u003c\/strong\u003e handles the high-frequency spectrum with smooth, fatigue-free refinement — no harshness, no sibilance, even at high volumes. Frequency response spans 55Hz to 20kHz for full musical coverage from punchy kick drums to delicate cymbal shimmer.\u003c\/p\u003e\n\n\u003cp\u003eThe STAGE3 68C is also built with sustainability in mind — JBL uses \u003cstrong\u003eeco-friendly recycled plastics\u003c\/strong\u003e and \u003cstrong\u003ePVC-free wiring\u003c\/strong\u003e throughout, so great sound comes with a lighter environmental footprint. Installation is straightforward with the included mounting hardware designed to fit a wide range of OEM door locations. Pair with a 4-channel amplifier rated 50–100W RMS per channel, or run directly off a quality head unit for a clean plug-and-play upgrade. Ideal for rock, pop, R\u0026amp;B, and acoustic music where vocal clarity and midrange presence matter most.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL STAGE3 68C?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Plus One™ Cone:\u003c\/strong\u003e Rigid, low-mass glass-fiber construction delivers tighter bass and more accurate midrange than standard polypropylene cones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Impedance:\u003c\/strong\u003e Optimized to extract maximum clean power from factory head units and aftermarket amplifiers alike — no impedance mismatch, no wasted watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95W RMS \/ 760W Peak Power Handling:\u003c\/strong\u003e Serious headroom for real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Silk Dome Tweeter:\u003c\/strong\u003e Smooth, fatigue-free high-frequency reproduction — no harshness, even at high listening volumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91dB Sensitivity:\u003c\/strong\u003e High-efficiency design delivers strong output from both head units and amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55Hz – 20kHz Frequency Response:\u003c\/strong\u003e Full musical bandwidth from tight bass punch to airy high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-Friendly Construction:\u003c\/strong\u003e Recycled plastics and PVC-free wiring — premium sound with a reduced environmental footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover Included:\u003c\/strong\u003e Ready to install out of the box — no external crossover hardware required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eThe STAGE3 68C's True 4-ohm impedance makes it one of the most versatile component sets in the JBL lineup — it's equally at home running off a factory head unit or a dedicated amplifier. For the best performance, pair with a 4-channel amp rated 50–100W RMS per channel. Mount the woofer in the factory door location using the included hardware, and position the tweeter in the A-pillar or sail panel for optimal soundstage imaging. Use 16-gauge or heavier speaker wire for runs over 6 feet to minimize resistance losses. The included passive crossover handles the tweeter\/woofer frequency split automatically — no additional crossover hardware needed.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSTAGE3 68C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Component System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Size\u003c\/td\u003e\n\u003ctd\u003e6.5\" (165mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e95W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e760W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e91dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e55Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e4 ohms (True 4-Ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003eGlass-Fiber Infused Plus One™\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003eEdge-Driven Silk Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eRecycled Plastics, PVC-Free Wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003ePassive Crossover Network, Mounting Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the STAGE3 68C off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the True 4-ohm impedance and 91dB sensitivity are specifically designed to work well with factory head units. You'll get a noticeable improvement over OEM speakers right out of the box. Adding an external amplifier will unlock the full 95W RMS potential and significantly improve dynamics and clarity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the STAGE3 68C?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 50–100W RMS per channel at 4 ohms is ideal. The True 4-ohm design means you'll get clean, efficient power transfer without impedance mismatch issues common with 3-ohm speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the STAGE3 68C compare to the JBL Club 64C?\u003c\/strong\u003e\u003cbr\u003eA: The STAGE3 68C uses a glass-fiber Plus One™ cone (vs. polypropylene on the Club 64C) and runs at a True 4 ohms (vs. 3 ohms), making it more head-unit friendly. The Club 64C offers a switchable tweeter level control and slightly different power handling. Both are excellent — the STAGE3 is the better pick for head-unit-only installs; the Club 64C shines with an amp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need a separate crossover for the STAGE3 68C?\u003c\/strong\u003e\u003cbr\u003eA: No — a passive crossover network is included in the box. For more precise active crossover control or time alignment, an amplifier with built-in crossover or a DSP processor will take the system further.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698239569987,"sku":"JBLSPKS368C","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/LS_JBL_STAGE_3_CAR_AUDIO_68C_HERO_0076_x1_0dfabfe6-ed29-4120-8f17-1aadb0b33187.png?v=1787256095"},{"product_id":"jbl-club-64ctp","title":"JBL Club 64CTP 6.5\" Car Component Speaker System 2-Way","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club 64CTP Car Component Speaker System\u003c\/strong\u003e delivers 70W RMS \/ 210W peak power at a 3.0-ohm nominal impedance — and takes the Club 64C formula one step further with the addition of \u003cstrong\u003eadjustable tweeter pods\u003c\/strong\u003e that let you aim your highs precisely where they need to go, even after installation. If soundstage imaging and high-frequency directionality matter to you, the 64CTP is the upgrade your cabin deserves.\u003c\/p\u003e\n\n\u003cp\u003eLike its Club Series siblings, the 64CTP is built around a 6.5\" woofer featuring JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e, which increases effective cone area beyond a standard 6.5\" driver for deeper bass extension and richer musical body. The cone is molded from \u003cstrong\u003eUV-resistant polypropylene\u003c\/strong\u003e, engineered to handle the brutal heat cycles and humidity of real-world in-car environments without warping or degrading. A robust ferrite magnet structure delivers 92dB sensitivity at 2.83V, giving you strong output whether you're running a factory head unit or an aftermarket amplifier. The \u003cstrong\u003eedge-driven tweeter\u003c\/strong\u003e features a \u003cstrong\u003eswitchable 0dB \/ +3dB output level control\u003c\/strong\u003e for treble tuning, and the pivoting pod mount lets you direct the tweeter's dispersion axis toward the listening position — a genuine advantage for precise stereo imaging. Frequency response spans 55Hz to 20kHz for full musical coverage.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is clean and flexible. The included \u003cstrong\u003eStarfish™ mounting adapters\u003c\/strong\u003e handle OEM door fitment with minimal modification, while the \u003cstrong\u003eI-Mount™ tweeter hardware\u003c\/strong\u003e and adjustable pods give you surface-mount, flush-mount, or angle-mount options depending on your vehicle's interior. Pair with a 4-channel amplifier rated 50–100W RMS per channel for optimal performance. The passive crossover network is included — no external crossover required. Ideal for listeners who prioritize vocal clarity, stereo imaging, and precise soundstage placement across rock, jazz, R\u0026amp;B, and acoustic genres.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club 64CTP?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Pods:\u003c\/strong\u003e Pivot and aim the tweeters toward the listening position even after installation — a key advantage for precise stereo imaging that fixed-mount systems can't match.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Cone Architecture:\u003c\/strong\u003e Increases effective cone area beyond a standard 6.5\" driver for deeper bass extension and more musical body without upsizing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Built to survive the heat, humidity, and UV exposure of real-world in-car environments for long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92dB Sensitivity:\u003c\/strong\u003e High-efficiency design delivers strong output from both head units and amplifiers — more volume per watt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable Tweeter Level (0dB \/ +3dB):\u003c\/strong\u003e Fine-tune your high-frequency balance to match your vehicle's unique acoustic character.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS \/ 210W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarfish™ Mounting Adapters:\u003c\/strong\u003e Designed for easy OEM door fitment across a wide range of vehicles — less cutting, less fabrication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover Included:\u003c\/strong\u003e Plug-and-play out of the box — no external crossover hardware required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003ePair the Club 64CTP with a 4-channel amplifier rated 50–100W RMS per channel for the best results. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker, so choose an amp rated stable at 2–4 ohms with adequate headroom. If running off a factory head unit, the 92dB sensitivity ensures solid output at everyday listening volumes — though an external amp will unlock the full dynamic range these speakers are capable of. Mount the woofer in the factory door location using the Starfish™ adapters, then position the adjustable tweeter pod in the A-pillar, sail panel, or dash corner — and pivot it toward the driver or passenger seat for the best soundstage. Use 16-gauge or heavier speaker wire for runs over 6 feet. The included passive crossover handles the tweeter\/woofer frequency split automatically.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub 64CTP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Component System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Size\u003c\/td\u003e\n\u003ctd\u003e6.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e70W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e210W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e92dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e55Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003eUV-Resistant Polypropylene (Plus One™ Architecture)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003eEdge-Driven with Adjustable Pod Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Level Control\u003c\/td\u003e\n\u003ctd\u003e0dB \/ +3dB Switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Depth\u003c\/td\u003e\n\u003ctd\u003e2.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout Diameter\u003c\/td\u003e\n\u003ctd\u003e4.4 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Hardware\u003c\/td\u003e\n\u003ctd\u003eStarfish™ Adapters, I-Mount™ Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003ePassive Crossover Network\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What makes the Club 64CTP different from the Club 64C?\u003c\/strong\u003e\u003cbr\u003eA: The 64CTP adds adjustable tweeter pods that let you pivot and aim the tweeters toward the listening position — even after installation. This gives you a significant advantage in soundstage imaging and high-frequency directionality compared to the fixed-mount tweeters on the 64C. Both share the same Plus One™ woofer, power handling, and sensitivity specs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the Club 64CTP?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 50–100W RMS per channel is ideal. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker, so choose an amp stable at 2–4 ohms. The 92dB sensitivity also makes these a solid performer off a factory head unit at moderate volumes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need a separate crossover?\u003c\/strong\u003e\u003cbr\u003eA: No — a passive crossover network is included in the box. For more precise active crossover control or time alignment, an amplifier with built-in crossover or a DSP processor will take the system further.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Club 64CTP fit my vehicle without cutting or fabricating?\u003c\/strong\u003e\u003cbr\u003eA: In most cases, yes. The Starfish™ mounting adapters are designed to fit a wide range of OEM door locations. The adjustable tweeter pods offer surface, flush, and angle-mount options for flexible placement. Contact us at Trinity Car Audio or check JBL's fitment guide to confirm compatibility with your specific make and model.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698239635523,"sku":"JBLSPKCB64CTP","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_CLUB_64CTP_HERO_43945_x2_075e9b6d-65e2-40d1-8bfc-ab8ee672fee8.png?v=1787256104"},{"product_id":"jbl-club-64c-car-component-speaker-system","title":"JBL Club 64C Car Component Speaker System","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club 64C Car Component Speaker System\u003c\/strong\u003e delivers 70W RMS \/ 210W peak power at a 3.0-ohm nominal impedance, purpose-built for drivers who want a serious step up from factory sound without breaking the bank. Whether you're threading through city traffic or cruising the open highway, the Club 64C fills your cabin with the kind of warm, detailed, full-range audio that makes every drive feel like a private listening session.\u003c\/p\u003e\n\n\u003cp\u003eThe foundation of the Club 64C is a 6.5\" woofer featuring JBL's patented \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e — a design that increases effective cone area beyond what a standard 6.5\" driver can achieve, delivering deeper bass extension and richer musical body. The cone is molded from \u003cstrong\u003eUV-resistant polypropylene\u003c\/strong\u003e, engineered to withstand the brutal heat and humidity cycles of an in-car environment without warping or degrading over time. A beefed-up ferrite magnet structure pushes sensitivity to 92dB at 2.83V, so your amplifier or head unit gets more output per watt. The \u003cstrong\u003eedge-driven tweeter\u003c\/strong\u003e handles the high-frequency spectrum with smooth, fatigue-free detail, and its \u003cstrong\u003eswitchable 0dB \/ +3dB output level control\u003c\/strong\u003e lets you tune the treble balance to match your vehicle's acoustics — a feature rarely found at this price point. Frequency response spans 55Hz to 20kHz, covering the full musical range from punchy kick drums to delicate cymbal overtones.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is straightforward thanks to JBL's included \u003cstrong\u003eStarfish™ mounting adapters\u003c\/strong\u003e and versatile \u003cstrong\u003eI-Mount™ tweeter hardware\u003c\/strong\u003e, designed to drop into factory door locations and fit behind OEM grilles with minimal modification. The 3.0-ohm impedance is compatible with both factory head units and aftermarket amplifiers — pair it with a 4-channel amp delivering 50–100W RMS per channel for the best results. Ideal for rock, R\u0026amp;B, pop, and acoustic music where vocal clarity and midrange presence are paramount. Works great in standard door installations with the passive crossover network included in the box.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club 64C?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Cone Architecture:\u003c\/strong\u003e Expands effective cone area beyond a standard 6.5\" driver for deeper bass and more musical body without upsizing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Engineered to survive the heat, humidity, and UV exposure of real-world in-car environments for long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92dB Sensitivity:\u003c\/strong\u003e High-efficiency design means more volume from less power — ideal for head unit or low-powered amp setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable Tweeter Level (0dB \/ +3dB):\u003c\/strong\u003e Dial in your high-frequency balance to match your vehicle's interior acoustics — a rare tuning feature at this price.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS \/ 210W Peak Power Handling:\u003c\/strong\u003e Handles real-world amplifier power without distortion or thermal stress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55Hz – 20kHz Frequency Response:\u003c\/strong\u003e Full-range coverage from tight bass punch to airy high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarfish™ Mounting Adapters:\u003c\/strong\u003e Designed for easy fitment in a wide range of OEM door locations — less cutting, less fabrication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover Included:\u003c\/strong\u003e Ready to install out of the box — no external crossover required for a clean, plug-and-play upgrade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eFor the best performance, pair the Club 64C with a 4-channel amplifier rated 50–100W RMS per channel. The 3.0-ohm impedance will draw slightly more current than a 4-ohm speaker, so choose an amp rated stable at 2–4 ohms with adequate headroom. If running off a factory head unit, the 92dB sensitivity ensures solid output at moderate volumes — though an external amp will unlock the full dynamic range these speakers are capable of. Mount the woofer in the factory door location using the included Starfish™ adapters, and position the tweeter in the A-pillar or sail panel for optimal soundstage imaging. Use 16-gauge or heavier speaker wire for runs over 6 feet to minimize resistance losses. The included passive crossover handles the tweeter\/woofer frequency split — no additional crossover hardware needed.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eClub 64C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Component System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Size\u003c\/td\u003e\n\u003ctd\u003e6.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e70W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e210W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e92dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e55Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003eUV-Resistant Polypropylene (Plus One™ Architecture)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003eEdge-Driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Level Control\u003c\/td\u003e\n\u003ctd\u003e0dB \/ +3dB Switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Hardware\u003c\/td\u003e\n\u003ctd\u003eStarfish™ Adapters, I-Mount™ Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003ePassive Crossover Network\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the JBL Club 64C?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 50–100W RMS per channel is the sweet spot. The 3.0-ohm impedance draws slightly more current than a 4-ohm speaker, so pick an amp stable at 2–4 ohms. If you're running a head unit only, the 92dB sensitivity will still give you solid output at everyday listening volumes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the Club 64C differ from the Club 64CSQ?\u003c\/strong\u003e\u003cbr\u003eA: The Club 64CSQ steps up to a carbon fiber cone and Y40 ferrite magnet for higher sensitivity (93dB) and slightly more power handling (95W RMS). The Club 64C uses a polypropylene Plus One™ cone and is a great value-oriented option that still delivers excellent JBL Club Series sound quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need a separate crossover for the Club 64C?\u003c\/strong\u003e\u003cbr\u003eA: No — a passive crossover network is included in the box. It handles the frequency split between the woofer and tweeter automatically. If you want more precise active crossover control, an amplifier with built-in crossover or a DSP processor can take things further.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will the Club 64C fit my vehicle without cutting or fabricating?\u003c\/strong\u003e\u003cbr\u003eA: In most cases, yes. The included Starfish™ mounting adapters are designed to fit a wide range of OEM door locations behind factory grilles. Contact us at Trinity Car Audio or check JBL's fitment guide to confirm compatibility with your specific make and model.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698239832131,"sku":"JBLSPKCB64C","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_CLUB_64C_HERO_43924_x2_515f6c5b-501b-4279-b6fc-532b4f033772.png?v=1787256141"},{"product_id":"jbl-club-64csq-2-way-car-component-speaker-system","title":"JBL Club 64CSQ 2-Way Car Component Speaker System","description":"\u003cp\u003eThe \u003cstrong\u003eJBL Club 64CSQ 2-Way Car Component Speaker System\u003c\/strong\u003e delivers 95W RMS \/ 285W peak power with a 3.0-ohm nominal impedance, engineered for audiophiles who refuse to settle for factory sound. Whether you're cruising through city streets or hammering down the highway, the Club 64CSQ transforms your cabin into a concert hall — with the precision, detail, and dynamic range that only JBL's Club Series engineering can deliver.\u003c\/p\u003e\n\n\u003cp\u003eAt the heart of the system is a 6.5\" woofer built on JBL's proprietary \u003cstrong\u003ePlus One™ cone architecture\u003c\/strong\u003e, which increases effective cone area beyond what a standard 6.5\" driver can achieve — translating directly into deeper, punchier bass extension down to 48Hz. The cone itself is constructed from \u003cstrong\u003ecarbon fiber\u003c\/strong\u003e, striking the ideal balance between rigidity and low mass for fast, accurate transient response. Paired with a \u003cstrong\u003eY40 ferrite magnet\u003c\/strong\u003e, the woofer achieves a sensitivity rating of 93dB at 2.83V — meaning your amplifier works less to get more volume. The \u003cstrong\u003eedge-driven silk dome tweeter\u003c\/strong\u003e handles the top end with silky refinement, and its adjustable output level lets you tailor the high-frequency balance to your vehicle's acoustics. Frequency response spans 48Hz to 21kHz, covering everything from tight kick drums to airy cymbal shimmer.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is where the Club 64CSQ really shines for the installer. JBL's included \u003cstrong\u003eStarfish™ mounting adapters\u003c\/strong\u003e and versatile \u003cstrong\u003eI-Mount tweeter hardware\u003c\/strong\u003e make fitment straightforward in a wide range of vehicles. The 3.0-ohm impedance pairs exceptionally well with modern head units and aftermarket amplifiers alike — pair it with a 75–150W RMS per channel amp for optimal performance. Ideal for rock, hip-hop, jazz, and acoustic genres where midrange clarity and imaging matter most. Works beautifully in sealed or open-baffle door installations.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose the JBL Club 64CSQ?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Cone Architecture:\u003c\/strong\u003e Increases effective cone area beyond a standard 6.5\" driver for deeper, more impactful bass without upsizing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon Fiber Woofer Cone:\u003c\/strong\u003e Lightweight yet rigid construction delivers fast transient response and accurate midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eY40 Ferrite Magnet:\u003c\/strong\u003e High-flux magnet delivers 93dB sensitivity — more output per watt, less strain on your amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Silk Dome Tweeter:\u003c\/strong\u003e Smooth, fatigue-free high-frequency reproduction with adjustable output level for acoustic tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48Hz – 21kHz Frequency Response:\u003c\/strong\u003e Wide bandwidth captures everything from sub-bass punch to the finest high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95W RMS \/ 285W Peak Power Handling:\u003c\/strong\u003e Built to take a serious signal without distortion or thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarfish™ Mounting Adapters:\u003c\/strong\u003e Simplifies installation across a broad range of OEM mounting locations — less cutting, less fabrication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0-Ohm Nominal Impedance:\u003c\/strong\u003e Optimized for both head unit and amplifier pairings, maximizing power transfer efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAmplifier \u0026amp; Installation Recommendations\u003c\/h2\u003e\n\u003cp\u003eFor the best performance, pair the Club 64CSQ with a 4-channel amplifier delivering 75–150W RMS per channel at 4 ohms (the 3.0-ohm load will draw slightly more power, so headroom matters). A dedicated external crossover or an amp with built-in high-pass\/low-pass crossover controls will let you dial in the tweeter and woofer blend precisely. If running off a head unit, ensure it can deliver at least 18–22W RMS per channel for adequate drive. Mount the woofer in the factory door location using the included Starfish™ adapters, and position the tweeter in the A-pillar or sail panel for the best soundstage imaging. Use 16-gauge or heavier speaker wire for runs over 6 feet to minimize resistance losses.\u003c\/p\u003e\n\n\u003ch2\u003eFull Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCLUB64CSQ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e2-Way Component System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Size\u003c\/td\u003e\n\u003ctd\u003e6.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (RMS)\u003c\/td\u003e\n\u003ctd\u003e95W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak)\u003c\/td\u003e\n\u003ctd\u003e285W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (@ 2.83V\/1m)\u003c\/td\u003e\n\u003ctd\u003e93dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e48Hz – 21kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Impedance\u003c\/td\u003e\n\u003ctd\u003e3.0 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWoofer Cone Material\u003c\/td\u003e\n\u003ctd\u003eCarbon Fiber (Plus One™ Architecture)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Type\u003c\/td\u003e\n\u003ctd\u003eEdge-Driven Silk Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTweeter Output\u003c\/td\u003e\n\u003ctd\u003eAdjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet Type\u003c\/td\u003e\n\u003ctd\u003eY40 Ferrite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Depth\u003c\/td\u003e\n\u003ctd\u003eRefer to JBL fitment guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eStarfish™ Adapters, I-Mount Hardware, Crossover Network\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What amplifier should I pair with the JBL Club 64CSQ?\u003c\/strong\u003e\u003cbr\u003eA: A 4-channel amp rated 75–150W RMS per channel is ideal. The 3.0-ohm impedance will draw slightly more power than a 4-ohm speaker, so choose an amp with a bit of headroom and stable 2–4 ohm operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I run the Club 64CSQ off my factory head unit?\u003c\/strong\u003e\u003cbr\u003eA: Yes, but you'll only unlock a fraction of their potential. Factory head units typically output 15–22W RMS, which will drive them at moderate volumes. For the full 95W RMS experience, an external amplifier is strongly recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need to buy a separate crossover?\u003c\/strong\u003e\u003cbr\u003eA: No — the Club 64CSQ includes a passive crossover network in the box. However, if you want more precise tuning control (adjustable crossover points, time alignment), an amplifier with active crossover capability or a DSP processor will take the system to the next level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will these fit my vehicle without cutting or fabricating?\u003c\/strong\u003e\u003cbr\u003eA: In most cases, yes. The included Starfish™ mounting adapters are designed to fit a wide range of OEM door locations. Check JBL's vehicle fitment guide or contact us at Trinity Car Audio to confirm compatibility with your specific make and model.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43698240192579,"sku":"JBLSPKCB64CSQ","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/files\/JBL_CLUB_64CSQ_HERO_43919_x2_9e393684-6584-48e8-aa31-031033be73ac.png?v=1787256180"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/9575\/7123\/collections\/FRONT_WEB_JBL_Stadium_122SSI_1605.png?v=1787265492","url":"https:\/\/www.trinitycaraudio.com\/collections\/jbl.oembed?page=3","provider":"Trinity Car Audio","version":"1.0","type":"link"}