Description
Description
The American Bass Godfather 1000.2D is a compact Class D, 2‑channel amplifier built for serious car audio builds. Its dual‑mono, linkable design with a wired remote, clipping indicator, and multi‑protect circuitry gives you precise control and reliable performance in a small footprint.
- No Of Channels: 2 Channel — Two channels provide stereo output for front/rear installs or dedicated sub/woofer configurations when used with the mono option.
- Configuration: Full Range Digital — Digital Class D topology delivers efficient power with broad frequency capability.
- 4Ω RMS Power: 400W x 2 — Strong per‑channel power into 4Ω drivers, suitable for demanding midrange/woofer setups.
- 2Ω RMS Power: 600W x 2 — Higher current capability at 2Ω loads for keener headroom with low‑impedance speakers.
- 4Ω Mono Power: 1300W x 1 — Mono operation at 4Ω yields a single high‑output channel ideal for subwoofers.
- Frequency Response: 10Hz - 38Hz — Bottom‑end emphasis supports deep bass performance in subwoofer systems.
- Signal To Noise Ratio: 85dB — Indicates relatively clean output with low audible hiss under typical listening levels.
- Efficiency @ 4Ω: Over 70% — High efficiency reduces heat and battery draw during heavy bass passages.
- Damping Factor: 150< — Higher damping helps control woofer excursion for tighter bass transients.
- Input Sensitivity: 6V - 0.2V — Wide input range accommodates a variety of head‑unit signal levels and gain settings.
- Low Pass Filter: 50Hz - 8000Hz — Tailor bass roll‑off to match subwoofers or full‑range drivers.
- High Pass Filter: 20Hz - 800Hz — Block subsonics from mids/highs to reduce unwanted low‑frequency leakage.
- Multiply (X1, X10): 500Hz - 8KHz — Filter range options for shaping upper bass to treble content.
- Multiply (X1, X10): 200Hz - 8KHz — Additional high‑frequency shaping control for system tuning.
- FUSE RATING: 100A — Protects the amp and vehicle electrical system from overcurrent events.
- Dimensions: 11.82L x 7.15W x 2.33H inches — Compact form factor that fits under seats or in tight trunk spaces.
: Included — Allows on‑the‑fly level adjustments from the driver seat for quick tuning. - Clipping Indicator: Included — Visual cue to avoid distortion by preventing amplifier overdrive.
The Godfather 1000.2D is well suited to two‑channel front/rear systems with the option to run a dedicated sub on the mono 4Ω channel. Its broad filter adjustments, substantial power options, and practical tuning aids make it a versatile choice for precise, high‑impact car audio installations.
| NO OF CHANNELS | 2 CHANNEL |
| CONGIGURATION | FULL RANGE DIGITAL |
| 4OHM RMS POWER | 400W x 2 |
| 2OHM RMS POWER | 600W x 2 |
| 1OHM RMS POWER | na |
| 4OHM MONO POWER | 1300W x 1 |
| FREQUENCY RESPONSE | 10Hz - 38Hz |
| SIGNAL TO NOISE RATIO | 85Db |
| EFFICIENCY @ 4OHM | OVER 70% |
| DAMPING FACTOR | 150< |
| INPUT SENSITIVITY | 6V - 0.2V |
| SUBSONIC FILTER | na |
| LOW PASS FILTER | 50Hz - 8000Hz |
| MULTIPLY (X1, X10) | 500Hz - 8KHz |
| HIGH PASS FILTER | 20Hz - 800Hz |
| MULTIPLY (X1, X10) | 200Hz - 8KHz |
| BASS BOOST @45HZ | na |
| THD @ 4OHM | <0.1% |
| FUSE RATING | 100A |
| DIMENSIONS (LxWxH) | 11.82L x 7.15W x 2.33H inches |




